Date: Tue, 22 May 2007 15:31:20 +0200 From: Anders Nordby <anders@FreeBSD.org> To: freebsd-proliant@FreeBSD.org Subject: Using Virtual Serial Port on COM1 Message-ID: <20070522133120.GA80289@fupp.net>
next in thread | raw e-mail | index | archive | help
Hi, To ease the configuration of the Virtual Serial Port, I was thinking the best way to do it was to set up VSP on COM1, and have the external serial port be COM2. In rbsu (this is on a DL 360 G5), I set this: rbsu> SHOW CONFIG SCRIPT (..) SET CONFIG Embedded Serial Port COM 2; IRQ3; IO: 2F8h-2FFh SET CONFIG Virtual Serial Port COM 1; IRQ4; IO: 3F8h-3FFh SET CONFIG BIOS Serial Console Port COM 1; IRQ4; IO: 3F8h-3FFh SET CONFIG BIOS Serial Console Baud Rate 9600 SET CONFIG EMS Console Disabled Then, I only need to add a /boot.config with the -h option, to boot with a serial console. With this setup, the boot loader and kernel shows the output on the VSP just fine. The terminal on ttyd0 does not show up however, I get no login: prompt. In dmesg.boot, there is only: sio0: <Standard PC COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0 How come the VSP COM1 port on 3f8 is not found? Did anyone run into this? If I set up VSP on COM2 as is the standard thing to do, everything works fine. But then I have to recompile the boot loader (eeeew!). Cheers, -- Anders.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070522133120.GA80289>