Date: Sun, 18 Mar 2001 16:48:37 +0100 From: "Alex" <d_f0rce@gmx.de> To: <freebsd-isdn@freebsd.org> Cc: <freebsd-questions@freebsd.org> Subject: ISDN dialin - Problems with userland ppp Message-ID: <NEBBIKIHMLCDHCFEOMAHGEBBCBAA.d_f0rce@gmx.de>
next in thread | raw e-mail | index | archive | help
Hi, I'm sending this to freebsd-questions too, because it seems to be a userland-ppp problem and not an isdn problem. Sorry for the crosspost, if I'm wrong. I'm trying to enable isdn dialin and DSL dialout with i4b and userland ppp. DSL dialout works properly, but I couldn't manage to get ISDN dialin to work. It seems that the interface between isdnd and userland ppp doesn't work because I can see that isdnd is invoking my "regprog" but ppp doesn't take over the connection. I'm using 4.2-R. Here are my config-files: rc.conf ----------------------------------------------------------- ifconfig_xl0="inet 192.168.1.1 netmask 255.255.255.0 mtu 1492" ifconfig_ep0="inet 10.10.1.1 netmask 255.255.255.0 -arp mtu 1492" ppp_enable="YES" ppp_mode="auto" ppp_nat="YES" ppp_profile="default" ppp_user="root" isdn_enable="YES" isdn_fsdev="/dev/ttyv8" isdn_flags="-dn -d0x1f9" ------------------------------------------------------------- isdnd.rc ------------------------------------------------------------- system # Accounting acctall = on acctfile = /var/log/isdnd.acct useacctfile = yes isdntime = on # Monitor-Access monitor-allowed = no monitor-port = 451 monitor = "/var/run/isdn-monitor" monitor-access = fullcmd monitor-access = channelstate, logevents monitor-access = callin, callout monitor = "192.168.1.0/24" monitor-access = restrictedcmd, channelstate, callin, callout regexpr = "DIALIN.*call active" regprog = i4brunppp.bash #regprog = i4brunppp # MAIL settings in case of errors mailer = "/usr/bin/mail" mailto = "root" rtprio = 25 entry name = DIALIN isdncontroller = 0 isdnchannel = -1 usrdevicename = rbch usrdeviceunit = 0 local-phone-dialout = <mydialoutnr> local-phone-incoming = <mydialinnr> remote-phone-dialout = 0 remote-phone-incoming = * b1protocol = hdlc dialin-reaction = accept dialout-type = normal direction = in idletime-incoming = 300 ratetype = 0 unitlength = 0 unitlengthsrc = conf --------------------------------------------------------------- ppp.conf --------------------------------------------------------------- dialin: set log CCP Command IPCP LCP # I removed this entry, while trying to use the i4brunppp.bash script. # set proctitle ppp-rbch0 enable pap enable proxy set ifaddr 10.10.10.10 10.10.10.11 set timeout 60 set dial set login set hangup set device /dev/i4brbch0 set speed sync # link * set cd 10 default: set device PPPoE:ep0 set speed sync set cd set mru 1492 set mtu 1492 set authname <myauthname> set authkey <mypassword> set log Filter Phase Warning Error Alert set dial set login set ifaddr 10.10.1.1/0 10.0.0.2/0 add default HISADDR set server /var/run/internet "" 0177 nat enable yes set timeout 360 set reconnect 0 5000000 set redial 1+1-10 500000 # set filter alive 0 deny udp src eq 520 set filter alive 1 deny udp dst eq 520 set filter alive 2 deny udp src eq 513 set filter alive 3 deny udp src eq 525 set filter alive 4 deny udp src eq 137 set filter alive 5 deny udp src eq 138 set filter alive 6 deny udp src eq 139 set filter alive 7 deny udp dst eq 137 set filter alive 8 deny udp dst eq 138 set filter alive 9 deny udp dst eq 139 set filter alive 10 deny 0/0 MYADDR icmp set filter alive 11 permit 0/0 0/0 # set filter dial 0 deny udp src eq 513 set filter dial 1 deny udp src eq 525 set filter dial 2 deny udp src eq 137 set filter dial 3 deny udp src eq 138 set filter dial 4 deny udp src eq 139 set filter dial 5 deny udp dst eq 137 set filter dial 6 deny udp dst eq 138 set filter dial 7 deny udp dst eq 139 set filter dial 8 deny tcp finrst set filter dial 9 permit 0 0 -------------------------------------------------- As I couldn't find "i4brunppp" in my standard FreeBSD- Distribution Environment, I leeched i4b 0.90 and compiled i4brunppp from the sources. As it seemed that "i4brunppp" didn't take over the connection, I tried a bash script I found in the archives: /etc/isdn/i4brunppp.bash ---------------------------------------------------- #/usr/local/bin/bash /usr/sbin/ppp -direct dialin <> /dev/i4brbch0 ---------------------------------------------------- Of course I previously installed bash from the ports and i4brbch is configured within my kernel-conf file. Here is a piece of logfile of an incoming session: ---------------------------------------------------- Mar 18 14:20:12 lisa isdnd[142]: CHD 00002 DIALIN incoming call active (ctl 0, ch 1, rbch0) Mar 18 14:20:12 lisa isdnd[142]: DBG exec_prog: /etc/isdn/i4brunppp, args: 00002 DIALIN incoming call active (ctl 0, ch 1, rbch0) Mar 18 14:20:12 lisa isdnd[142]: DBG FSM event [msg-con-act-ind]: [accepted => connected] Mar 18 14:20:12 lisa isdnd[142]: DBG F_MCAI: Connection active! Mar 18 14:20:12 lisa isdnd[142]: DBG normal child (pid=386) termination, exitstat = 2 Mar 18 14:20:49 lisa isdnd[142]: CHD 00002 DIALIN incoming call disconnected (remote) Mar 18 14:20:49 lisa isdnd[142]: CHD 00002 DIALIN cause 16: Normal call clearing (Q.850) Mar 18 14:20:49 lisa isdnd[142]: CHD 00002 DIALIN connected 37 seconds Mar 18 14:20:49 lisa isdnd[142]: CHD 00002 DIALIN accounting: in 440, out 0 ------------------------------------------------------ i4brunppp was in this case my bash-script, not the program provided by i4b. I'm worried about the following line: --------- Mar 18 14:20:12 lisa isdnd[142]: DBG normal child (pid=386) termination, exitstat = 2 --------- If this is my i4brunppp bash script then it was invoked but exited immidiately. Unfortunately I couldn't find any ppp entries in the logs though I had enabled full ppp-logging at this time. Any ideas?? I tried to provide as many information as I can think of. Please e-mail me if you need more logs/traces or whatever. Greetings, Alex PS: Please answer directly, as I'm not on the list. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?NEBBIKIHMLCDHCFEOMAHGEBBCBAA.d_f0rce>