Date: Sun, 8 Jul 2001 15:39:19 +0200 From: Eelke Blok <e.blok@student.utwente.nl> To: freebsd-multimedia@freebsd.org Subject: Getting Pinnacle PCTV Pro to work Message-ID: <01070815391903.00338@hotrod>
next in thread | raw e-mail | index | archive | help
Hi all,
I tried to find the answer to my question on the web, but couldn't find it. I
am having some trouble getting my Pinnacle PCTV Pro TV-card to work in
FreeBSD with fxtv. All I get from fxtv is a blue screen. Channel change works
in that the OSD displays a channel identifier and a frequency when pushing
the buttons. I also get a click on start-up of fxtv and some faint noise from
the speakers the (but nowhere near as loud as a mistuned channel, it
basically sounds as though something was "turned on"). The version of FXTV
I'm using is 1.02.
I copied over a configuration file from a friend in the same building, which
means at least the channels and frequencies should be OK. I wanted to check
any other options in there, but I can't find where the config file is
supposed to be (neither in the documentation to fxtv nor using find).
You can probably tell I am a total newbie, so don't be too hard on me :)
Here's my dmesg output, if it's any use:
---
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #5: Thu Jun 28 21:15:37 CEST 2001
eelke@hotrod:/usr/obj/usr/src/sys/HOTROD
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 706294477 Hz
CPU: AMD Athlon(tm) Processor (706.29-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 268353536 (262064K bytes)
config> di sn0
No such device: sn0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 258445312 (252388K bytes)
Preloaded elf kernel "kernel" at 0xc02d6000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02d609c.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 4.2 irq 9
pci0: <VIA 83C572 USB controller> at 4.3 irq 9
pcm0: <Creative EMU10K1> port 0xa400-0xa41f irq 9 at device 9.0 on pci0
ed0: <NE2000 PCI Ethernet (ProLAN)> port 0x9800-0x981f irq 5 at device 10.0
on pci0
ed0: address 00:40:95:01:8c:84, type NE2000 (16 bit)
bktr0: <BrookTree 878> mem 0xe1000000-0xe1000fff irq 9 at device 13.0 on pci0
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
bktr0: Detected a MSP3451G-A2 at 0x80
bktr0: Pinnacle/Miro TV, Temic PAL tuner, msp3400c stereo.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 13.1 irq 9
atapci1: <Promise ATA100 controller> port
0x8000-0x803f,0x8400-0x8403,0x8800-0x8807,0x9000-0x9003,0x9400-0x9407 mem
0xde800000-0xde81ffff irq 10 at device 17.0 on pci0
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ad0: 19574MB <WDC WD205BA> [39770/16/63] at ata0-master UDMA66
acd0: CD-RW <PLEXTOR CD-R PX-W8432T> at ata1-master using PIO4
acd1: CDROM <CD-ROM 36X/AKW> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad0s3a
ad0s2: raw partition size != slice size
ad0s2: start 3148740, end 33527654, size 30378915
ad0s2c: start 3148740, end 6265349, size 3116610
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 4.2 on
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 9 at device 4.3 on
pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
---
Any help would be very much appreciated.
Cheers,
Eelke
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01070815391903.00338>