Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 28 Dec 2003 21:01:52 +0900 (JST)
From:      Hideki Yamamoto <yamamoto436@oki.com>
To:        stable@freebsd.org
Subject:   Re: bge drivers does not work for 3COM 3C996-SX / 3C996B-T
Message-ID:  <20031228.210152.74688241.yamamoto436@oki.com>
In-Reply-To: <3EDE1B6A.6050804@isometry.net>
References:  <ac078a$ehm$2@main.gmane.org> <3EDE1B6A.6050804@isometry.net>

next in thread | previous in thread | raw e-mail | index | archive | help

Hi, 

I tried today's 4.9-stable on a FreeBSD box with two 3COM 3C996-SXs and
two onboard BMC5703 chips.  3COM 3C996-SX boards are linkup, but the
other side, an SX I/F on SUN F280 is not linkup. 
When doing ping command to SUN, LED on 3C996 are brinking but 
nothing happens to SUN board.
I changed bge0 to bge2, but the situation is the same.
Hardware diagram is as follows.  bge0 can connect to the router or
another PC with intel SX board. 
Is this related to AUTO negotiation?  I cannot find any parameters
about AUTO negotiation in 'bge' driver source.

Any help would be greatly appreciated.

Hideki Yamamoto

 +--------------+
 |              |
 | (bge0)3C996-SX+-----+[Router]  
 |              |
 | (bge2)3C996-SX+-----+[SUN F280]
 |              |
 +--------------+

bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xf7ef0000-0xf7efffff irq 10 at device 1.0 on pci1
bge0: Ethernet address: 00:04:76:e1:06:cf
bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7ee0000-0xf7eeffff irq 11 at device 2.0 on pci1
bge1: Ethernet address: 00:0b:cd:d2:b0:40
miibus0: <MII bus> on bge1
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
pcib2: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
pcib3: <Host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
pcib4: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
IOAPIC #1 intpin 10 -> irq 15
IOAPIC #1 intpin 13 -> irq 16
pci4: <PCI bus> on pcib4
bge2: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xf7ff0000-0xf7ffffff irq 15 at device 1.0 on pci4
bge2: Ethernet address: 00:0a:5e:1d:83:25
bge3: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7fe0000-0xf7feffff irq 16 at device 2.0 on pci4
bge3: Ethernet address: 00:0b:cd:d2:b0:3b
-----------------------------------------------------------------
Hideki YAMAMOTO
Oki Electric Industry Co., Ltd.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031228.210152.74688241.yamamoto436>