Date: Mon, 26 Apr 2004 23:03:48 -0400 From: Ryan J.Taylor <rj@rjt.org> To: freebsd-ppc@freebsd.org Subject: successful freebsd-ppc install Message-ID: <811E66CA-97F7-11D8-8801-000393829E22@rjt.org>
next in thread | raw e-mail | index | archive | help
I just wanted to send a big "congratulations" to those involved with the FreeBSD/PowerPC port. I've been watching anxiously since things kicked off and I finally got around to doing an install using Peter's very handy instructions and tarball at http://people.freebsd.org/~grehan/install.html First thing I did was tar up a -CURRENT source tree and stuck it on the Mac so I could try a kernel compile. Worked fine. Then I installed a ports tree and started compiling stuff from there. All in all, the system works quite well. It locks up every once in a while (no debug shows on the console) but I say it's time for people to start playing with it! Regards, RJ dmesg from my PowerMac G4 400MHz: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #0: Mon Apr 26 20:07:41 EDT 2004 rjtaylor@darwin.rjt.org:/usr/obj/usr/src/sys/DARWIN Preloaded elf kernel "/boot/kernel/kernel" at 0x3ef000. Timecounter "decrementer" frequency 24907667 Hz quality 0 cpu0: Motorola PowerPC 7400 revision 2.8, 400.00 MHz cpu0: HID0 8094c0a4<EMCP,DOZE,DPM,EIEC,ICE,DCE,SGE,BTIC,BHT> real memory = 734003200 (700 MB) avail memory = 704851968 (672 MB) random: <entropy source, Software, Yarrow> nexus0: <OpenFirmware Nexus device> openpic0: <OpenPIC Interrupt Controller> on nexus0 unin0: <Apple UniNorth System Controller> on nexus0 unin0: Version 3 pcib0: <Apple UniNorth Host-PCI bridge> on nexus0 pci0: <PCI bus> on pcib0 pcib0: unknown resource request from (null) pci0: <display, VGA> at device 16.0 (no driver attached) pcib1: <Apple UniNorth Host-PCI bridge> on nexus0 pci1: <PCI bus> on pcib1 pcib2: <OpenFirmware PCI-PCI bridge> at device 13.0 on pci1 pci2: <PCI bus> on pcib2 pcib1: unknown resource request from (null) pci2: <display, VGA> at device 2.0 (no driver attached) macio0: <KeyLargo I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 on pci 2 zs0: <Zilog Z8530> mem 0x8700-0x87ff,0x8600-0x86ff,0x8500-0x85ff,0x8400-0x84ff,0 x13000-0x13fff irq 50,22 on macio0 zs0: [FAST] zs0: [FAST] zstty0: <ttya> on zs0 zstty1: <ttyb> on zs0 ata0 mem 0x8a00-0x8aff,0x1f000-0x1ffff irq 19 on macio0 ata1 mem 0x8b00-0x8bff,0x20000-0x20fff irq 20 on macio0 ata2 mem 0x8c00-0x8cff,0x21000-0x21fff irq 21 on macio0 ohci0: <Apple KeyLargo USB controller> mem 0x80082000-0x80082fff irq 27 at devic e 8.0 on pci2 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80082000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0 usb0: <Apple KeyLargo USB controller> on ohci0 usb0: USB revision 1.0 uhub0: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <Apple KeyLargo USB controller> mem 0x80081000-0x80081fff irq 28 at devic e 9.0 on pci2 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80081000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0 usb1: <Apple KeyLargo USB controller> on ohci1 usb1: USB revision 1.0 uhub1: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2: Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/ 1.22, addr 2 uhub2: 3 ports with 2 removable, bus powered ukbd0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/1.22, addr 3, icla ss 3/1 pci2: <serial bus, FireWire> at device 10.0 (no driver attached) pcib3: <Apple UniNorth Host-PCI bridge> on nexus0 pci3: <PCI bus> on pcib3 gem0: <Apple GMAC Ethernet Adaptor> mem 0xf5200000-0xf53fffff irq 41 at device 1 5.0 on pci3 gem0: Reserved 0x200000 bytes for rid 0x10 type 3 at 0xf5200000 miibus0: <MII bus> on gem0 bmtphy0: <BCM5201 10/100baseTX PHY> on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto gem0: 10kB RX FIFO, 9kB TX FIFO gem0: Ethernet address: 00:30:65:4c:c9:3c gem0: [GIANT-LOCKED] sc0: <System console> on nexus0 sc0: Unknown <16 virtual consoles, flags=0x300> Timecounters tick every 10.000 msec ad0: 9797MB <QUANTUM FIREBALLP KX10.2> [19906/16/63] at ata0-master BIOSPIO ad1: 9787MB <WDC WD102AA> [19885/16/63] at ata0-slave BIOSPIO acd0: DVDR <MATSHITADVD-ROM SR-8585> at ata1-slave BIOSPIO Manual root filesystem specification: <fstype>:<device> Mount <device> using filesystem <fstype> eg. ufs:/dev/da0a ? List valid disk boot devices <empty line> Abort manual input mountroot> ufs:ad0s10 Mounting root from ufs:ad0s10
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?811E66CA-97F7-11D8-8801-000393829E22>