Date: Mon, 26 Jul 2004 11:47:04 +0200 From: =?ISO-8859-1?Q?J=F6rg_Reisenweber?= <jr@ecce-terram.de> To: freebsd-sparc64@freebsd.org Subject: Problems on a Netra T1 105 using FreeBSD 5.2.1 Message-ID: <C0110B8C-DEE8-11D8-9DB5-000393CBA37E@ecce-terram.de>
next in thread | raw e-mail | index | archive | help
Hello, we are having problems with the installation of 5.2.1 on a Netra T1 =20 105. dmesg output: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights =20 reserved. FreeBSD 5.2.1-RELEASE #0: Tue Feb 24 07:47:33 GMT 2004 root@bobbi.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0452000. Timecounter "tick" frequency 440027828 Hz quality 0 real memory =3D 536870912 (512 MB) avail memory =3D 505610240 (482 MB) cpu0: Sun Microsystems UltraSparc-IIi Processor (440.03 MHz CPU) nexus0: <OpenFirmware Nexus device> pcib0: <U2P UPA-PCI bridge> on nexus0 pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A pcib0: [FAST] pcib0: [FAST] DVMA map: 0xc0000000 to 0xc3ffffff pci0: <OFW PCI bus> on pcib0 pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0 pci1: <OFW PCI bus> on pcib1 ebus0: revision 0x01 ebus0: <PCI-EBus2 bridge> mem =20 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 1.0 on pci1 ebus0: <auxio> addr =20 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000=20 -0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no =20= driver attached) ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver =20 attached) ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached) ebus0: <su> addr 0x14003803f8-0x14003803ff irq 28 (no driver attached) ebus0: <su> addr 0x14003602f8-0x14003602ff irq 20 (no driver attached) ebus0: <ecpp> addr =20 0x1400700000-0x140070000f,0x140030015c-0x140030015d,0x1400340278=20 -0x1400340287 irq 34 (no driver attached) ebus0: <fdthree> addr =20 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003203f0=20 -0x14003203f7 irq 39 (no driver attached) eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0 eeprom0: model mk48t59 eeprom0: hostid 80c251b0 ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached) ebus0: <watchdog> addr 0x1400200000-0x140020003f irq 4 (no driver =20 attached) ebus0: <display7seg> addr 0x1400200040 (no driver attached) ebus0: <beeper> addr 0x1400722000-0x1400722003 (no driver attached) ebus0: <flashprom> addr 0x1000400000-0x10005fffff (no driver attached) ebus0: <flashprom> addr 0x1000800000-0x10009fffff (no driver attached) ebus0: <i2c> addr 0x1400600000-0x1400600003 irq 40 (no driver attached) ebus0: <i2c> addr 0x1400100000-0x1400100003 irq 27 (no driver attached) ebus0: <SUNW,lom> addr 0x1400400000-0x1400400063 (no driver attached) hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 =20= on pci1 hme0: Ethernet address: 08:00:20:c2:51:b0 miibus0: <MII bus> on hme0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy1: <Generic IEEE 802.3u media interface> on miibus0 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sym0: <875> port 0xc00000-0xc000ff mem =20 0xe000a000-0xe000afff,0xe0008000-0xe00080ff at device 2.0 on pci1 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking hme1: <Sun HME 10/100 Ethernet> mem 0xe0010000-0xe0017fff at device 3.1 =20= on pci1 hme1: Ethernet address: 08:00:20:c2:51:b0 miibus1: <MII bus> on hme1 ukphy2: <Generic IEEE 802.3u media interface> on miibus1 ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0 pci2: <OFW PCI bus> on pcib2 pcib3: <OFW PCI-PCI bridge> at device 1.0 on pci2 pci3: <OFW PCI bus> on pcib3 atapci0: <CMD 646 WDMA2 controller> port =20 0x1020-0x102f,0x1018-0x101b,0x1010-0x1017,0x1008-0x100b,0x1000-0x1007 =20= at device 14.0 on pci3 pcib3: slot 14 INTA is routed to irq 2 atapci0: [MPSAFE] ata2: at 0x1000 on atapci0 ata2: [MPSAFE] ata3: at 0x1010 on atapci0 ata3: [MPSAFE] Timecounters tick every 10.000 msec Waiting 15 seconds for SCSI devices to settle GEOM: create disk da0 dp=3D0xfffff8002faf5868 GEOM: create disk da1 dp=3D0xfffff80000812868 da0 at sym0 bus 0 target 0 lun 0 da0: <SEAGATE ST318203LSUN18G 034A> Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged =20 Queueing Enabled da0: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C) da1 at sym0 bus 0 target 1 lun 0 da1: <IBM IC35L018UCDY10-0 S23C> Fixed Direct Access SCSI-3 device da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged =20 Queueing Enabled da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) Mounting root from ufs:/dev/da0a =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D We are currently using this machine for Typo3, a php-based Content =20 Management System. Every few days the machine seems to hang. The machine is still pingable =20= but nothing else works. Even the console screen stays black. A hard =20 reset is all that helps... We browsed the log files but didn't find anything useful to solve the =20= problem. Are there any known such issues with FreeBSD 5.2.1 on a Netra T1 105 or =20= do you have any clues? Thank you in advance and best regards, J=F6rg _______________________________________ Ecce Terram GmbH J=F6rg Reisenweber Edewechter Landstr. 42 Systemintegration 26131 Oldenburg Tel.: 0441-500120 jr@ecce-terram.de Fax: 0441-5001229=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C0110B8C-DEE8-11D8-9DB5-000393CBA37E>