Date: Sat, 8 Apr 2006 23:37:42 -0600 From: David J Brooks <daeg@houston.rr.com> To: freebsd-acpi@freebsd.org Subject: Thermal problems with HP Pavillion 510c Message-ID: <200604090037.42786.daeg@houston.rr.com>
next in thread | raw e-mail | index | archive | help
Description of Buggy Behavior:
ACPI Thermal reports absurdly low temperatures and is ignored at start-up.
As a consequence, the CPU fan runs loudly and continuously. When booted under
Win XP the thermal system operates as expected, and much more quietly.
dmesg output (ACPI enabled):
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #16: Mon Mar 27 08:22:11 CST 2006
david@fuzzy.home.net:/usr/obj/usr/src/sys/FUZZY
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0794000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07941b0.
Calibrating clock(s) ... i8254 clock: 1193084 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1295686277 Hz
CPU: Intel(R) Celeron(TM) CPU 1300MHz (1295.69-MHz 686-class
CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 401080320 (382 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000825000 - 0x0000000017605fff, 383651840 bytes (93665 pages)
0x0000000017d00000 - 0x0000000017e77fff, 1540096 bytes (376 pages)
avail memory = 387153920 (369 MB)
MP Configuration Table version 1.4 found at 0xc009fd70
Table 'FACP' at 0x17cfbf0a
Table 'APIC' at 0x17cfbf7e
MADT: Found table at 0x17cfbf7e
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
ACPI APIC Table: <PTLTD APIC >
bios32: Found BIOS32 Service Directory header at 0xc00f6640
bios32: Entry = 0xfd7b0 (c00fd7b0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd7b0+0x1f8
pnpbios: Found PnP BIOS data at 0xc00f66a0
pnpbios: Entry = f0000:915d Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040011 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
VESA: information block
56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00
00 01 10 00 38 24 2e 01 00 01 40 01 00 01 63 01
00 01 1c 01 09 01 0a 01 0b 01 0c 01 1d 01 0e 01
00 01 27 01 28 01 01 01 10 01 11 01 12 01 02 01
VESA: 20 mode(s) found
VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc06b5b02 (1000022)
VESA: Intel(R) 810, Intel(R) 815 Chipset Video BIOS
VESA: Intel Corporation Intel(R) 810, Intel(R) 815 Chipset Hardware Version
0.0
null: <null device, zero device>
ioapic0: routing intpin 13 (ISA IRQ 13) to vector 48
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 49
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71248086)
pcibios: BIOS version 2.10
Found $PIR table, 8 entries at 0xc00fdf40
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 1 1 14 A 0x60 3 4 5 7 9 10 11 12 14 15
slot 1 1 14 B 0x61 3 4 5 7 9 10 11 12 14 15
slot 1 1 14 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 1 1 14 D 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 1 13 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 2 1 13 B 0x62 3 4 5 7 9 10 11 12 14 15
slot 2 1 13 C 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 1 13 D 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 1 11 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 3 1 11 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 3 1 11 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 1 11 D 0x61 3 4 5 7 9 10 11 12 14 15
embedded 1 6 A 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 9 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 9 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 9 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 9 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 9 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 9 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
ACPI timer: 1/1 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x1010
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7124, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7125, revid=0x03
bus=0, slot=1, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 1 supports D0 D3 current D0
map[10]: type 3, range 32, base f8000000, size 26, enabled
map[14]: type 1, range 32, base f4000000, size 19, enabled
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2418, revid=0x02
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2410, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2411, revid=0x02
bus=0, slot=31, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 000010a0, size 4, enabled
found-> vendor=0x8086, dev=0x2412, revid=0x02
bus=0, slot=31, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[20]: type 4, range 32, base 00001080, size 5, enabled
pcib0: matched entry for 0.31.INTD
pcib0: slot 31 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2413, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
map[20]: type 4, range 32, base 00001100, size 4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x2415, revid=0x02
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
map[10]: type 4, range 32, base 00001200, size 8, enabled
map[14]: type 4, range 32, base 00001300, size 6, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
agp0: <Intel 82810E (i810E GMCH) SVGA controller> mem
0xf8000000-0xfbffffff,0xf4000000-0xf407ffff irq 16 at device 1.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
agp0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xf4000000
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x2000-0x2fff
pcib1: memory decode 0xf4100000-0xf42fffff
pcib1: prefetched decode 0xf4300000-0xf43fffff
pcib1: Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=1, slot=6, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0103, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00002000, size 8, enabled
pcib1: (null) requested I/O range 0x2000-0x20ff: in range
map[14]: type 1, range 32, base f4200000, size 8, enabled
pcib1: (null) requested memory range 0xf4200000-0xf42000ff: good
pcib1: matched entry for 1.6.INTA
pcib1: slot 6 INTA hardwired to IRQ 19
found-> vendor=0x11c1, dev=0x044e, revid=0x02
bus=1, slot=11, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0303, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xfc (63000 ns), maxlat=0x0e (3500 ns)
intpin=a, irq=9
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base f4200400, size 8, enabled
pcib1: (null) requested memory range 0xf4200400-0xf42004ff: good
map[14]: type 4, range 32, base 00002820, size 3, enabled
pcib1: (null) requested I/O range 0x2820-0x2827: in range
map[18]: type 4, range 32, base 00002400, size 8, enabled
pcib1: (null) requested I/O range 0x2400-0x24ff: in range
pcib1: matched entry for 1.11.INTA
pcib1: slot 11 INTA hardwired to IRQ 18
found-> vendor=0x8086, dev=0x1229, revid=0x05
bus=1, slot=13, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0113, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=9
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base f4300000, size 12, enabled
pcib1: (null) requested memory range 0xf4300000-0xf4300fff: good
map[14]: type 4, range 32, base 00002800, size 5, enabled
pcib1: (null) requested I/O range 0x2800-0x281f: in range
map[18]: type 1, range 32, base f4100000, size 20, enabled
pcib1: (null) requested memory range 0xf4100000-0xf41fffff: good
pcib1: matched entry for 1.13.INTA
pcib1: slot 13 INTA hardwired to IRQ 17
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x2000
pcib1: rl0 requested I/O range 0x2000-0x20ff: in range
rl0: <RealTek 8139 10/100BaseTX> port 0x2000-0x20ff mem 0xf4200000-0xf42000ff
irq 19 at device 6.0 on pci1
pcib1: rl0 requested I/O range 0x2000-0x20ff: in range
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:40:2b:1c:2a:64
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 50
rl0: [MPSAFE]
pci1: <simple comms> at device 11.0 (no driver attached)
fxp0: <Intel 82558 Pro/100 Ethernet> port 0x2800-0x281f mem
0xf4300000-0xf4300fff,0xf4100000-0xf41fffff irq 17 at device 13.0 on pci1
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf4300000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 000a 0005
fxp0: Dynamic Standby mode is disabled
miibus1: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:90:27:0e:4a:9c
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 51
fxp0: [MPSAFE]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH UDMA66 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x10a0-0x10af at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x10a0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 52
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=51 ostat1=50
ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=10 stat1=10 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 53
ata1: [MPSAFE]
uhci0: <Intel 82801AA (ICH) USB controller> port 0x1080-0x109f irq 19 at
device 31.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1080
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH (82801AA)> port 0x1200-0x12ff,0x1300-0x133f irq 17 at device
31.5 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1200
pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0x1300
pcm0: [MPSAFE]
pcm0: <Analog Devices AD1886 AC97 Codec (id = 0x41445361)>
pcm0: Codec features headphone, 6 bit master volume, Analog Devices Phat
Stereo
pcm0: Primary codec extended features variable rate PCM, reserved 1
pcm0: ac97 codec dac ready count: 0
pcm0: sndbuf_setmap 1732d000, 4000; 0xd5062000 -> 1732d000
pcm0: sndbuf_setmap 17329000, 4000; 0xd5066000 -> 17329000
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (-263.-7C)
acpi_tz0: _PSV value is absurd, ignored (-273.-2C)
acpi_tz0: _ACx value is absurd, ignored (-266.-7C)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 54
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 55
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
sio0: irq maps: 0xcc01 0xcc11 0xcc01 0xcc01
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56
sio1: irq maps: 0xcc01 0xcc09 0xcc01 0xcc01
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 57
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on
acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 58
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 59
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xd0000-0xd07ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
uhub1: vendor 0x109f product 0x7148, class 9/0, rev 1.10/0.00, addr 2
uhub1: 4 ports with 4 removable, self powered
uscanner0: Color FlatbedScanner 13, rev 1.00/1.21, addr 3
ulpt0: hp deskjet 3600, rev 2.00/1.00, addr 4, iclass 7/1
ulpt0: using bi-directional mode
Device configuration finished.
lapic: Divisor 2, Frequency 49834021 hz
Timecounter "TSC" frequency 1295686277 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled,
default to deny, logging unlimited
lo0: bpf attached
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on ICH chip
ad0: 38166MB <Seagate ST340810A 3.35> at ata0-master PIO4
ad0: 78165360 sectors [82714C/15H/63S] 16 sectors/interrupt 1 depth queue
ad1: setting PIO4 on ICH chip
ad1: 152627MB <WDC WD1600JB-00EVA0 15.05R15> at ata0-slave PIO4
ad1: 312581808 sectors [330774C/15H/63S] 16 sectors/interrupt 1 depth queue
ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire
ata1-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd0: setting PIO4 on ICH chip
GEOM: new disk ad0
GEOM: new disk ad1
acd0: <SAMSUNG CD-ROM SC-152G/C400> CDROM drive at ata1 as master
acd0: read 8937KB/s (8937KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: setting PIO4 on ICH chip
acd1: DMA limited to UDMA33, controller found non-ATA66 cable
acd1: setting UDMA33 on ICH chip
acd1: <DVDRW IDE 16X/VER A089> DVDR drive at ata1 as slave
acd1: read 8269KB/s (8251KB/s) write 2756KB/s (2751KB/s), 2048KB buffer,
UDMA33
acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd1: Writes: CDR, CDRW, DVDR, test write, burnproof
acd1: Audio: play, 256 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: CD-R 120mm audio disc
pcm0: measured ac97 link rate at 48003 Hz, will use 48000 Hz
pass0 at ata1 bus 0 target 1 lun 0
pass0: <DVDRW IDE 16X A089> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
pass1 at ata1 bus 0 target 0 lun 0
pass1: <SAMSUNG CD-ROM SC-152G C400> Removable CD-ROM SCSI-0 device
pass1: 16.000MB/s transfers
cd0 at ata1 bus 0 target 1 lun 0
cd0: <DVDRW IDE 16X A089> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: cd present [328926 x 2048 byte records]
cd1 at ata1 bus 0 target 0 lun 0
cd1: <SAMSUNG CD-ROM SC-152G C400> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
GEOM: new disk cd0
GEOM: new disk cd1
Trying to mount root from ufs:/dev/ad1s1a
start_init: trying /sbin/init
procfs registered
ad1: setting PIO4 on ICH chip
ad1: setting UDMA66 on ICH chip
netsmb_dev: loaded
splash: image decoder found: fire_saver
Linux ELF exec handler installed
dmesg output (ACPI disabled): The system will not boot without ACPI.
Output from sysctl hw.acpi:
hw.acpi.supported_sleep_state: S1 S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 1
hw.acpi.reset_video: 1
hw.acpi.cpu.cx_supported: C1/0
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu.cx_usage: 100.00%
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.tz0.temperature: -268.0C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.passive_cooling: 0
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: -1
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: -1
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
URL where my ASL can be found:
http://www.quinnfamily.org/david-HPPavillion510c.asl
Any help will be sincerely appreciated,
David
--
Sure God created the world in only six days,
but He didn't have an established user-base.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200604090037.42786.daeg>