Date: Sat, 10 Nov 2007 19:21:37 -0500 (EST) From: Gardner Bell <gbell72@rogers.com> To: freebsd-stable@freebsd.org Subject: Bad VPD checksum Message-ID: <868740.65655.qm@web88004.mail.re2.yahoo.com>
next in thread | raw e-mail | index | archive | help
Hello,
I just recently upgraded my 6.2-PRERELEASE system to 7.0-BETA2 and am
noticing the following bad checksums on my two on board broadcom
gigabit ethernet cards.
dan@mx1~% dmesg | grep VPD
pci0:10:9:0: bad VPD cksum, remain 72
pci0:10:9:1: bad VPD cksum, remain 72
Included below is a verbose dmesg in hopes that it may help with known
bad checksums on broadcom baded cards.
dan@mx1~% dmesg | more
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA2 #0: Sat Nov 10 17:07:27 EST 2007
root@mx1.bsdca.com:/usr/obj/usr/src/sys/TYAN
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff805c3000.
Calibrating clock(s) ... i8254 clock: 1193238 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1607416284 Hz
CPU: AMD Opteron(tm) Processor 242 (1607.42-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow!+,3DNow!>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way
associative
usable memory = 1066303488 (1016 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000098fff, 622592 bytes (152 pages)
0x00000000006c0000 - 0x000000003e0cefff, 1033957376 bytes (252431
pages)
avail memory = 1027821568 (980 MB)
ACPI APIC Table: <PTLTD APIC >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ACPI: RSDP @ 0x0xf7040/0x0014 (v 0 PTLTD )
0)
0)
E)
ACPI: FACS @ 0x0x3ff19fc0/0x0040
1)
1)
0)
00)
1)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 3, Interrupt 24 at 0xdf200000
MADT: Found IO APIC ID 4, Interrupt 28 at 0xdf201000
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
io: <I/O>
acpi0: <PTLTD RSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003004
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=058000] [hdr=00] is there (id=005e10de)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.P44_ -> bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.K801.HMM0 -> bus 0 dev 24 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.K801.HMM1 -> bus 0 dev 24 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.P60_ -> bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.P64_ -> bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.P68_ -> bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.SBA0 -> bus 0 dev 1 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.SBA1 -> bus 0 dev 1 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PIRQ -> bus 0 dev 1 func 0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x10de, dev=0x005e, revid=0xa3
domain=0, bus=0, slot=0, func=0
class=05-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0051, revid=0xa3
domain=0, bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0x8c00, size 10, enabled
found-> vendor=0x10de, dev=0x0052, revid=0xa2
domain=0, bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250
ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0, size 5, enabled
map[20]: type I/O Port, range 32, base 0x5000, size 6, enabled
map[24]: type I/O Port, range 32, base 0x5040, size 6, enabled
found-> vendor=0x10de, dev=0x0053, revid=0xf2
domain=0, bus=0, slot=6, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250
ns)
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0x1400, size 4, enabled
found-> vendor=0x10de, dev=0x005c, revid=0xa2
domain=0, bus=0, slot=9, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x02 (500
ns)
found-> vendor=0x10de, dev=0x005d, revid=0xa3
domain=0, bus=0, slot=14, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=25, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=25, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=25, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=25, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory> at device 0.0 (no driver attached)
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
atapci0: <nVidia nForce CK804 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1400-0x140f at device 6.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1400
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 49
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=60 ostat1=70
ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 50
ata1: [MPSAFE]
ata1: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x2000-0x2fff
pcib1: memory decode 0xdd000000-0xdeffffff
pcib1: no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x4752, revid=0x27
domain=0, bus=1, slot=7, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0
ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xde000000, size 24,
enabled
pcib1: requested memory range 0xde000000-0xdeffffff: good
map[14]: type I/O Port, range 32, base 0x2000, size 8, enabled
pcib1: requested I/O range 0x2000-0x20ff: in range
map[18]: type Memory, range 32, base 0xdd000000, size 12,
enabled
pcib1: requested memory range 0xdd000000-0xdd000fff: good
pcib1: matched entry for 1.7.INTA (src \\_SB_.PCI0.LNK3:0)
pci_link2: Picked IRQ 16 with weight 0
ioapic0: Changing polarity for pin 16 to high
pcib1: slot 7 INTA routed to irq 16 via \\_SB_.PCI0.LNK3
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem
0xde000000-0xdeffffff,0xdd000000-0xdd000fff irq 16 at device 7.0 on
pci1
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xf000-0xfff
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib3: could not get PCI interrupt routing table for \\_SB_.PCI2 -
AE_NOT_FOUND
pci8: <ACPI PCI bus> on pcib3
pci8: domain=0, physical bus=8
found-> vendor=0x1022, dev=0x7450, revid=0x12
domain=0, bus=8, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0
ns)
found-> vendor=0x1022, dev=0x7451, revid=0x01
domain=0, bus=8, slot=10, func=1
class=08-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Memory, range 64, base 0xdf200000, size 12,
enabled
found-> vendor=0x1022, dev=0x7450, revid=0x12
domain=0, bus=8, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0
ns)
found-> vendor=0x1022, dev=0x7451, revid=0x01
domain=0, bus=8, slot=11, func=1
class=08-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Memory, range 64, base 0xdf201000, size 12,
enabled
pcib4: <ACPI PCI-PCI bridge> at device 10.0 on pci8
pcib4: domain 0
pcib4: secondary bus 9
pcib4: subordinate bus 9
pcib4: I/O decode 0xf000-0xfff
pcib4: no prefetched decode
pci9: <ACPI PCI bus> on pcib4
pci9: domain=0, physical bus=9
pcib5: <ACPI PCI-PCI bridge> at device 11.0 on pci8
pcib5: domain 0
pcib5: secondary bus 10
pcib5: subordinate bus 10
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xdf300000-0xdf3fffff
pcib5: no prefetched decode
pci10: <ACPI PCI bus> on pcib5
pci10: domain=0, physical bus=10
found-> vendor=0x14e4, dev=0x1648, revid=0x03
domain=0, bus=10, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0
ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xdf310000, size 16,
enabled
pcib5: requested memory range 0xdf310000-0xdf31ffff: good
map[18]: type Memory, range 64, base 0xdf300000, size 16,
enabled
pcib5: requested memory range 0xdf300000-0xdf30ffff: good
pcib5: matched entry for 10.9.INTA
pcib5: slot 9 INTA hardwired to IRQ 28
found-> vendor=0x14e4, dev=0x1648, revid=0x03
domain=0, bus=10, slot=9, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0
ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xdf330000, size 16,
enabled
pcib5: requested memory range 0xdf330000-0xdf33ffff: good
map[18]: type Memory, range 64, base 0xdf320000, size 16,
enabled
pcib5: requested memory range 0xdf320000-0xdf32ffff: good
pcib5: matched entry for 10.9.INTB
pcib5: slot 9 INTB hardwired to IRQ 29
pci0:10:9:0: bad VPD cksum, remain 72
bge0: <Broadcom Gigabit Ethernet Controller, ASIC rev. 0x2003> mem
0xdf310000-0xdf31ffff,0xdf300000-0xdf30ffff irq 28 at device 9.0 on
pci10
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xdf310000
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000818, model 0x0019, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:e0:81:2e:c1:aa
ioapic2: routing intpin 0 (PCI IRQ 28) to vector 51
bge0: [MPSAFE]
bge0: [ITHREAD]
pci0:10:9:1: bad VPD cksum, remain 72
bge1: <Broadcom Gigabit Ethernet Controller, ASIC rev. 0x2003> mem
0xdf330000-0xdf33ffff,0xdf320000-0xdf32ffff irq 29 at device 9.1 on
pci10
bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xdf330000
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: OUI 0x000818, model 0x0019, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge1: bpf attached
bge1: Ethernet address: 00:e0:81:2e:c1:ab
ioapic2: routing intpin 1 (PCI IRQ 29) to vector 52
bge1: [MPSAFE]
bge1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 53
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sio0: irq maps: 0xc01 0xc11 0xc01 0xc01
sio0: irq maps: 0xc01 0xc11 0xc01 0xc01
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 54
sio0: [FILTER]
sio1: irq maps: 0xc01 0xc09 0xc01 0xc01
sio1: irq maps: 0xc01 0xc09 0xc01 0xc01
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 55
sio1: [FILTER]
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
isa_probe_children: probing PnP devices
Device configuration finished.
lapic: Divisor 2, Frequency 100463532 hz
Timecounter "TSC" frequency 1607416284 Hz quality -100
Timecounters tick every 1.000 msec
DUMMYNET with IPv6 initialized (040826)
lo0: bpf attached
ipfw2 initialized, divert enabled, rule-based forwarding enabled,
default to deny, logging limited to 10 packets/entry by default
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on nForce CK804 chip
ad0: setting UDMA100 on nForce CK804 chip
ad0: 76319MB <WDC WD800JB-00JJA0 05.01C05> at ata0-master UDMA100
ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth
queue
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 3 to local APIC 1
ioapic0: Assigning ISA IRQ 4 to local APIC 0
ioapic0: Assigning ISA IRQ 9 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 1
ioapic2: Assigning PCI IRQ 28 to local APIC 0
ioapic2: Assigning PCI IRQ 29 to local APIC 1
GEOM: new disk ad0
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?868740.65655.qm>