Date: Sat, 25 Apr 2009 22:26:39 -0400 From: Luazi <embedpro@gmail.com> To: freebsd-arm@freebsd.org Subject: NSLU2 cannot activate npe Message-ID: <fcbb06250904251926l6d45bf2qa3ecdd74456e64a8@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi, I got my sources from CVS today and successfully built a kernel for my slug but the npe is failing to initialize. I have included part of the boot messages below. Any ideas anyone??? Thanks in advance. Luazi ixp0: <Intel IXP4XX> on motherboard ixp0: 37603<RCOMP,USB,ETH0,ETH1,PCI> pcib0: <IXP4XX PCI Bus> on ixp0 pci0: <PCI bus> on pcib0 ohci0: <NEC uPD 9210 USB controller> irq 28 at device 1.0 on pci0 ohci0: [ITHREAD] usbus0: <NEC uPD 9210 USB controller> on ohci0 ohci1: <NEC uPD 9210 USB controller> irq 27 at device 1.1 on pci0 ohci1: [ITHREAD] usbus1: <NEC uPD 9210 USB controller> on ohci1 ehci0: <NEC uPD 720100 USB 2.0 controller> irq 26 at device 1.2 on pci0 ehci0: [ITHREAD] usbus2: EHCI version 1.0 usbus2: <NEC uPD 720100 USB 2.0 controller> on ehci0 ixpclk0: <IXP4XX Timer> on ixp0 ixpiic0: <IXP4XX GPIO-Based I2C Interface> on ixp0 iicbb0: <I2C bit-banging driver> on ixpiic0 iicbus0: <Philips I2C bus> on iicbb0 master-only iic0: <I2C generic I/O> on iicbus0 ixpwdog0: <IXP4XX Watchdog Timer> on ixp0 uart0: <Non-standard ns8250 class UART with FIFOs> on ixp0 uart0: [FILTER] uart0: console (115200,n,8,1) uart1: <Non-standard ns8250 class UART with FIFOs> on ixp0 uart1: [FILTER] ixpqmgr0: <IXP4XX Q-Manager> on ixp0 ixpqmgr0: [ITHREAD] ixpqmgr0: [ITHREAD] npe0: <IXP NPE-B> on ixp0 npe0: [ITHREAD] npe0: MAC at 0xc800c000 npe0: MII at 0xc800c000 npe0: load fw image IXP425.NPE-B Func 0x2 Rev 2.1 npe0: cannot find PHY 1. npe0: cannot activate npe device_attach: npe0 attach returned 6 npe1: <IXP NPE-C> on ixp0 npe1: [ITHREAD] npe1: MAC at 0xc8009000 npe1: MII at 0xc800c000 npe1: load fw image IXP425.NPE-C Func 0x5 Rev 2.1 npe1: cannot find PHY 0. npe1: cannot activate npe device_attach: npe1 attach returned 6 ixpclk0: [FILTER] Timecounter "IXP4XX Timer" frequency 66666600 Hz quality 1000 Timecounters tick every 10.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 bootpc_init: wired to interface 'npe0' panic: bootpc_init: Could not find interface specified by BOOTP_WIRED_TO: npe0 KDB: enter: panic [thread pid 0 tid 100000 ] Stopped at kdb_enter+0x48: ldrb r15, [r15, r15, ror r15]! db>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?fcbb06250904251926l6d45bf2qa3ecdd74456e64a8>