Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 21 Feb 2010 22:31:11 +0800
From:      Alastair Hogge <agh@coolrhaug.com>
To:        freebsd-hardware@freebsd.org
Cc:        Randy Chou <randychou@yahoo.com>
Subject:   RE: Intel DP45SG motherboard problem (amd64)
Message-ID:  <201002212231.12018.agh@coolrhaug.com>

next in thread | raw e-mail | index | archive | help
--Boundary-00=_wOUgLhXx5DHjWT4
Content-Type: Text/Plain;
  charset="us-ascii"
Content-Transfer-Encoding: 7bit

> > Hello all.
> > I have a problem with Intel LGA775 DP45SG Intel P45/ICH10R motherboard
> > on FreeBSD/amd64. Any devices (keyboard, sata, net) don't work after
> > kernel loading. It works for i386 (expect for keyboard: first pressed
> > key "sticks").
> > FreeBSD versions that i tried are: 7.0-RELEASE, 7.2-RELEASE, 8.0-CURRENT
> > There was no difference with/without ACPI.
> > I connect serial console, boot -v and I'm seeing FreeBSD complaining
> > about inability to allocate interrupts for devices, like the log below:
>
> Try 'device mptable'.  Also, do you have an i386 dmesg?
>
> --
> John Baldwin
Hello John,

In regards to an old email thread:
http://lists.freebsd.org/pipermail/freebsd-hardware/2009-June/thread.html#5887

I've attached the i386 dmesg & "mptable device" from a 9.0-CURRENT -r204168 
system which still fails on booting an amd64 CD.

Currently, the 201002 snapshot hangs at (please forgive for any spelling 
mistakes):
ACPI disabled:

cpu0 on motherboard
est0: <Ehanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922060c0616
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
orm0: <ISA Option ROMs> at iomem 0xcf800-0xd5fff,0xd6000-0xd6fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x54 on isa0
atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
atrtc0: Warning: Couldn't map interrupt.
fdc0: cannot reserve interrupt line
ppc0: cannont reserve I/O port range
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922060c0616
device_attach: est0 attach returned 6
Timecounter "TSC" frequency 2399972535 Hz quality 800
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff81047ba8

ACPI enabled & verbose:
ACPI: ASPT 0xcfd6cb18 0002C (v2 INTEL  PerfTune 00000116 AMI 00000003)
ACPI: WDTT 0xcfd65918 002CC (v2 INTEL  DP45SG   00000116 AMI 00000003)
acpi0: <INTEL DP45SG> on motherboard
PCIe: Memory Mapped configuration base @ 0xf0000000
acpi0: could not allocate interrupt
ACPI Exception: AE_ALREADY_EXISTS, Unable to install System Control Interrupt 
ha
ndler (20100121/evevent-257)
acpi0: Could not enable ACPI: AE_ALREADY_EXISTS
device_attach: acpi0 attach returned 6


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address   = 0x88
fault code              = supervisor write data, page not present
instruction pointer     = 0x20:0xffffffff80860fd9
stack pointer           = 0x28:0xffffffff8144dbf0
frame pointer           = 0x28:0xffffffff8144dc30
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 0 (swapper)
[ thread pid 0 tid 100000 ]
stopped at      acpi_install_wakeup_handler+0xd9:       movq     
%r15,0x88(%r12)
db>

I can't drive db has the keyboard doesn't respond, also, according to 
http://wiki.freebsd.org/DebugWithDcons I should be able to use dcons and a 
firewire connection, however, it looks like dcons doesn't connect to the amd64 
boot(works OK when in i386 mode).

Have you any ideas on how we can get our DP45SG systems booting amd64?

Thanks

--Boundary-00=_wOUgLhXx5DHjWT4
Content-Type: text/plain;
  charset="ISO-8859-1";
  name="DP45SG-i386.dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
	filename="DP45SG-i386.dmesg"

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0 r204168: Sun Feb 21 19:32:39 WST 2010
    agh@nova:/usr/obj/usr/depot/svn.freebsd.org/base/head/sys/NOVA i386
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0abb000.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2399979258 Hz
CPU: Intel(R) Core(TM)2 Quad CPU    Q9650  @ 3.00GHz (2399.98-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant

Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 6144 kbytes, 16-way associative, 64 bytes/line
real memory  = 4294967296 (4096 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000048fff, 294912 bytes (72 pages)
0x0000000000059000 - 0x0000000000095fff, 249856 bytes (61 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x00000000cc019fff, 3409920000 bytes (832500 pages)
0x00000000cfd92000 - 0x00000000cfeeffff, 1433600 bytes (350 pages)
avail memory = 3410059264 (3252 MB)
MP Configuration Table version 1.4 found at 0xc00fd240
APIC: Using the MPTable enumerator.
SMP: Added CPU 0 (BSP)
SMP: Added CPU 1 (AP)
SMP: Added CPU 2 (AP)
SMP: Added CPU 3 (AP)
MPTable: <DP45SG INTEL>
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
pnpbios: Found PnP BIOS data at 0xc00f0a30
pnpbios: Entry = f0000:c72e  Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ioapic0: Assuming intbase of 0
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 9 trigger: level
lapic: Routing ExtINT -> LINT0
lapic: Routing NMI -> LINT1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: INT 16 interface
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80020010
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=2e208086)
pcibios: No call entry point
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x2e20, revid=0x03
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2e21, revid=0x03
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
pcib0: slot 1 INTA routed to irq 16
found->	vendor=0x8086, dev=0x10cd, revid=0x00
	domain=0, bus=0, slot=25, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xe0200000, size 17, enabled
	map[14]: type Memory, range 32, base 0xe0224000, size 12, enabled
	map[18]: type I/O Port, range 32, base 0xf100, size  5, enabled
pcib0: slot 25 INTA routed to irq 20
found->	vendor=0x8086, dev=0x3a37, revid=0x00
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type I/O Port, range 32, base 0xf0e0, size  5, enabled
pcib0: slot 26 INTA routed to irq 16
found->	vendor=0x8086, dev=0x3a38, revid=0x00
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=5
	map[20]: type I/O Port, range 32, base 0xf0c0, size  5, enabled
pcib0: slot 26 INTB routed to irq 21
found->	vendor=0x8086, dev=0x3a39, revid=0x00
	domain=0, bus=0, slot=26, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=3
	map[20]: type I/O Port, range 32, base 0xf0a0, size  5, enabled
pcib0: slot 26 INTC routed to irq 18
found->	vendor=0x8086, dev=0x3a3c, revid=0x00
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=3
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xe0225c00, size 10, enabled
pcib0: slot 26 INTC routed to irq 18
ehci early: SMM active, request owner change
found->	vendor=0x8086, dev=0x3a3e, revid=0x00
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=7
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xe0220000, size 14, enabled
pcib0: slot 27 INTA routed to irq 22
found->	vendor=0x8086, dev=0x3a34, revid=0x00
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type I/O Port, range 32, base 0xf080, size  5, enabled
pcib0: slot 29 INTA routed to irq 23
found->	vendor=0x8086, dev=0x3a35, revid=0x00
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	map[20]: type I/O Port, range 32, base 0xf060, size  5, enabled
pcib0: slot 29 INTB routed to irq 19
found->	vendor=0x8086, dev=0x3a36, revid=0x00
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=3
	map[20]: type I/O Port, range 32, base 0xf040, size  5, enabled
pcib0: slot 29 INTC routed to irq 18
found->	vendor=0x8086, dev=0x3a3a, revid=0x00
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xe0225800, size 10, enabled
pcib0: slot 29 INTA routed to irq 23
ehci early: SMM active, request owner change
ehci early: SMM does not respond
found->	vendor=0x8086, dev=0x244e, revid=0x90
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3a16, revid=0x00
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2822, revid=0x00
	domain=0, bus=0, slot=31, func=2
	class=01-04-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI supports 16 messages
	map[10]: type I/O Port, range 32, base 0xf150, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xf140, size  2, enabled
	map[18]: type I/O Port, range 32, base 0xf130, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0xf120, size  2, enabled
	map[20]: type I/O Port, range 32, base 0xf020, size  5, enabled
	map[24]: type Memory, range 32, base 0xe0225000, size 11, enabled
pcib0: slot 31 INTB routed to irq 19
found->	vendor=0x8086, dev=0x3a30, revid=0x00
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=3
	map[10]: type Memory, range 64, base 0xe0226000, size  8, enabled
	map[20]: type I/O Port, range 32, base 0xf000, size  5, enabled
pcib0: slot 31 INTC routed to irq 18
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xe000-0xefff
pcib1:   memory decode     0xd0000000-0xe00fffff
pcib1:   no prefetched decode
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
found->	vendor=0x1002, dev=0x7280, revid=0x00
	domain=0, bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib1: requested memory range 0xd0000000-0xdfffffff: good
	map[18]: type Memory, range 64, base 0xe0030000, size 16, enabled
pcib1: requested memory range 0xe0030000-0xe003ffff: good
	map[20]: type I/O Port, range 32, base 0xe000, size  8, enabled
pcib1: requested I/O range 0xe000-0xe0ff: in range
pcib0: slot 1 INTA routed to irq 16
pcib1: slot 0 INTA is routed to irq 16
found->	vendor=0x1002, dev=0x72a0, revid=0x00
	domain=0, bus=1, slot=0, func=1
	class=03-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 64, base 0xe0020000, size 16, enabled
pcib1: requested memory range 0xe0020000-0xe002ffff: good
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xe0030000-0xe003ffff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> mem 0xe0020000-0xe002ffff at device 0.1 on pci1
em0: <Intel(R) PRO/1000 Network Connection 6.9.25> port 0xf100-0xf11f mem 0xe0200000-0xe021ffff,0xe0224000-0xe0224fff irq 20 at device 25.0 on pci0
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 48
em0: using IRQ 256 for MSI
em0: Using MSI interrupt
em0: [FILTER]
em0: bpf attached
em0: Ethernet address: 00:1c:c0:8c:09:d9
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xf0e0-0xf0ff irq 16 at device 26.0 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xf0c0-0xf0df irq 21 at device 26.1 on pci0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xf0a0-0xf0bf irq 18 at device 26.2 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 51
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xe0225c00-0xe0225fff irq 18 at device 26.7 on pci0
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
hdac0: <Intel 82801JI High Definition Audio Controller> mem 0xe0220000-0xe0223fff irq 22 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100122_0141
hdac0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 257 to local APIC 0 vector 52
hdac0: using IRQ 257 for MSI
hdac0: [MPSAFE]
hdac0: [ITHREAD]
hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xf080-0xf09f irq 23 at device 29.0 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 53
uhci3: [MPSAFE]
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xf060-0xf07f irq 19 at device 29.1 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54
uhci4: [MPSAFE]
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xf040-0xf05f irq 18 at device 29.2 on pci0
uhci5: [MPSAFE]
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xe0225800-0xe0225bff irq 23 at device 29.7 on pci0
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus7: waiting for BIOS to give up control
usbus7: timed out waiting for BIOS
usbus7: EHCI version 1.0
usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib2: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xd000-0xdfff
pcib2:   memory decode     0xe0100000-0xe01fffff
pcib2:   no prefetched decode
pcib2:   Subtractively decoded bridge.
pci2: <PCI bus> on pcib2
pci2: domain=0, physical bus=2
found->	vendor=0x11c1, dev=0x5811, revid=0x70
	domain=0, bus=2, slot=0, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xe0100000, size 12, enabled
pcib2: requested memory range 0xe0100000-0xe0100fff: good
pcib2: slot 0 INTA routed to irq 19
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	domain=0, bus=2, slot=2, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type I/O Port, range 32, base 0xd000, size  8, enabled
pcib2: requested I/O range 0xd000-0xd0ff: in range
	map[14]: type Memory, range 32, base 0xe0101000, size  8, enabled
pcib2: requested memory range 0xe0101000-0xe01010ff: good
pcib2: slot 2 INTA routed to irq 20
fwohci0: <Lucent FW322/323> mem 0xe0100000-0xe0100fff irq 19 at device 0.0 on pci2
fwohci0: [MPSAFE]
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:90:27:00:02:2b:34:ed
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x49000
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 00:90:27:00:02:2b:34:ed @ 0xfffe00000000, S400, maxrec 2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000001, SelfID Count=2, CYCLEMASTER mode
pci2: <network, ethernet> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH8 AHCI SATA controller> port 0xf150-0xf157,0xf140-0xf143,0xf130-0xf137,0xf120-0xf123,0xf020-0xf03f mem 0xe0225000-0xe02257ff irq 19 at device 31.2 on pci0
ahci0: attempting to allocate 1 MSI vectors (16 supported)
msi: routing MSI IRQ 258 to local APIC 0 vector 64
ahci0: using IRQ 258 for MSI
ahci0: [MPSAFE]
ahci0: [ITHREAD]
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ SNTF AL CLO 3Gbps PMD SSC PSC 32cmd CCC EM eSATA 6ports
ahci0: Caps2:
ahci0: EM Caps: ALHD XMT SMB LED
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [MPSAFE]
ahcich0: [ITHREAD]
ahcich0: Caps:
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [MPSAFE]
ahcich1: [ITHREAD]
ahcich1: Caps:
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [MPSAFE]
ahcich2: [ITHREAD]
ahcich2: Caps:
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [MPSAFE]
ahcich3: [ITHREAD]
ahcich3: Caps: HPCP ESP
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: [MPSAFE]
ahcich4: [ITHREAD]
ahcich4: Caps:
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: [MPSAFE]
ahcich5: [ITHREAD]
ahcich5: Caps:
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0 on motherboard
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922060c0616
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1 on motherboard
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922060c0616
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2 on motherboard
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922060c0616
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3 on motherboard
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616092206320622
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pnpbios: 0 devices, largest 0 bytes
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xcf800-0xd5fff,0xd6000-0xd6fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 56
ata1: [MPSAFE]
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 57
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 58
uart0: [FILTER]
uart0: fast interrupt
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 59
uart1: [FILTER]
uart1: fast interrupt
isa_probe_children: probing PnP devices
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922062e0616
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922062e0616
device_attach: est1 attach returned 6
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160922062e0616
device_attach: est2 attach returned 6
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616092206320622
device_attach: est3 attach returned 6
Device configuration finished.
Reducing kern.maxvnodes 214601 -> 100000
procfs registered
linprocfs registered
linsysfs registered
lapic: Divisor 2, Frequency 133288023 Hz
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 60
Timecounter "TSC" frequency 2399979258 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1)  (me) 
firewire0: bus manager 1 
bpf attached
hdac0: Probing codec #2...
hdac0: HDA Codec #2: IDT 92HD73E1
hdac0:  HDA Codec ID: 0x111d7676
hdac0:        Vendor: 0x111d
hdac0:        Device: 0x7676
hdac0:      Revision: 0x02
hdac0:      Stepping: 0x02
hdac0: PCI Subvendor: 0x50018086
hdac0: 	Found audio FG nid=1 startnode=10 endnode=44 total=34
hdac0: 
hdac0: Processing audio FG cad=2 nid=1...
hdac0: GPIO: 0xc0000008 NumGPIO=8 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1
hdac0:  nid 10 0x0221401f as  1 seq 15    Headphones  Jack jack  1 loc  2 color   Green misc 0
hdac0:  nid 11 0x02a19020 as  2 seq  0           Mic  Jack jack  1 loc  2 color    Pink misc 0
hdac0:  nid 12 0x01113014 as  1 seq  4       Speaker  Jack jack  1 loc  1 color    Blue misc 0
hdac0:  nid 13 0x01114010 as  1 seq  0       Speaker  Jack jack  1 loc  1 color   Green misc 0
hdac0:  nid 14 0x01a19030 as  3 seq  0           Mic  Jack jack  1 loc  1 color    Pink misc 0
hdac0:  nid 15 0x01111012 as  1 seq  2       Speaker  Jack jack  1 loc  1 color   Black misc 0
hdac0:  nid 16 0x01116011 as  1 seq  1       Speaker  Jack jack  1 loc  1 color  Orange misc 0
hdac0:  nid 17 0x40f000f0 as 15 seq  0         Other  None jack  0 loc  0 color Unknown misc 0
hdac0:  nid 18 0x40f000f0 as 15 seq  0         Other  None jack  0 loc  0 color Unknown misc 0
hdac0:  nid 19 0x40f000f0 as 15 seq  0         Other  None jack  0 loc  0 color Unknown misc 0
hdac0:  nid 20 0x40f000f0 as 15 seq  0         Other  None jack  0 loc  0 color Unknown misc 0
hdac0:  nid 34 0x40f000f0 as 15 seq  0         Other  None jack  0 loc  0 color Unknown misc 0
hdac0:  nid 35 0x01451140 as  4 seq  0     SPDIF-out  Jack jack  5 loc  1 color   Black misc 1
hdac0:  nid 36 0x40f000f0 as 15 seq  0         Other  None jack  0 loc  0 color Unknown misc 0
hdac0: Patched pins configuration:
hdac0:  nid 10 0x0221401f as  1 seq 15    Headphones  Jack jack  1 loc  2 color   Green misc 0
hdac0:  nid 11 0x02a19020 as  2 seq  0           Mic  Jack jack  1 loc  2 color    Pink misc 0
hdac0:  nid 12 0x01113014 as  1 seq  4       Speaker  Jack jack  1 loc  1 color    Blue misc 0
hdac0:  nid 13 0x01114010 as  1 seq  0       Speaker  Jack jack  1 loc  1 color   Green misc 0
hdac0:  nid 14 0x01a19030 as  3 seq  0           Mic  Jack jack  1 loc  1 color    Pink misc 0
hdac0:  nid 15 0x01111012 as  1 seq  2       Speaker  Jack jack  1 loc  1 color   Black misc 0
hdac0:  nid 16 0x01116011 as  1 seq  1       Speaker  Jack jack  1 loc  1 color  Orange misc 0
hdac0:  nid 17 0x40f000f0 as 15 seq  0         Other  None jack  0 loc  0 color Unknown misc 0 [DISABLED]
hdac0:  nid 18 0x40f000f0 as 15 seq  0         Other  None jack  0 loc  0 color Unknown misc 0 [DISABLED]
hdac0:  nid 19 0x40f000f0 as 15 seq  0         Other  None jack  0 loc  0 color Unknown misc 0 [DISABLED]
hdac0:  nid 20 0x40f000f0 as 15 seq  0         Other  None jack  0 loc  0 color Unknown misc 0 [DISABLED]
hdac0:  nid 34 0x40f000f0 as 15 seq  0         Other  None jack  0 loc  0 color Unknown misc 0 [DISABLED]
hdac0:  nid 35 0x01451140 as  4 seq  0     SPDIF-out  Jack jack  5 loc  1 color   Black misc 1
hdac0:  nid 36 0x40f000f0 as 15 seq  0         Other  None jack  0 loc  0 color Unknown misc 0 [DISABLED]
hdac0: 4 associations found:
hdac0: Association 0 (1) out:
hdac0:  Pin nid=13 seq=0
hdac0:  Pin nid=16 seq=1
hdac0:  Pin nid=15 seq=2
hdac0:  Pin nid=12 seq=4
hdac0:  Pin nid=10 seq=15
hdac0: Association 1 (2) in:
hdac0:  Pin nid=11 seq=0
hdac0: Association 2 (3) in:
hdac0:  Pin nid=14 seq=0
hdac0: Association 3 (4) out:
hdac0:  Pin nid=35 seq=0
hdac0: Tracing association 0 (1)
hdac0:  Pin 13 traced to DAC 21
hdac0:  Pin 16 traced to DAC 22
hdac0:  Pin 15 traced to DAC 23
hdac0:  Pin 12 traced to DAC 24
hdac0:  Pin 10 traced to DAC 21 and hpredir 0
hdac0: Association 0 (1) trace succeeded
hdac0: Tracing association 1 (2)
hdac0:  Pin 11 traced to ADC 26
hdac0: Association 1 (2) trace succeeded
hdac0: Tracing association 2 (3)
hdac0:  Pin 14 traced to ADC 27
hdac0: Association 2 (3) trace succeeded
hdac0: Tracing association 3 (4)
hdac0:  Pin 35 traced to DAC 38
hdac0: Association 3 (4) trace succeeded
hdac0: Tracing input monitor
hdac0:  Tracing nid 29 to out
hdac0:  nid 29 is input monitor
hdac0: Tracing other input monitors
hdac0:  Tracing nid 11 to out
hdac0:  Tracing nid 14 to out
hdac0: Tracing beeper
hdac0: Enabling headphone/speaker audio routing switching:
hdac0: 	as=0 sense nid=10 [UNSOL]
hdac0: Pin sense: nid=10 res=0x7fffffff
hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
hdac0: 
hdac0: +-------------------+
hdac0: | DUMPING HDA NODES |
hdac0: +-------------------+
hdac0: 
hdac0: Default Parameter
hdac0: -----------------
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e05e0
hdac0:                  16 20 24 bits, 44 48 88 96 192 KHz
hdac0:          IN amp: 0x00270300
hdac0:         OUT amp: 0x80027f7f
hdac0: 
hdac0:             nid: 10
hdac0:            Name: pin: Headphones (Green Jack)
hdac0:      Widget cap: 0x00400183
hdac0:                  UNSOL STEREO
hdac0:     Association: 0 (0x00008000)
hdac0:         Pin cap: 0x0000173f
hdac0:                  ISC TRQD PDC HP OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0:      Pin config: 0x0221401f
hdac0:     Pin control: 0x00000080 HP
hdac0:       Input amp: 0x00270300
hdac0:                  mute=0 step=3 size=39 offset=0
hdac0:     connections: 6
hdac0:           |
hdac0:           + <- nid=21 [audio output] (selected)
hdac0:           + [DISABLED] <- nid=22 [audio output]
hdac0:           + [DISABLED] <- nid=23 [audio output]
hdac0:           + [DISABLED] <- nid=24 [audio output]
hdac0:           + [DISABLED] <- nid=25 [audio output] [DISABLED]
hdac0:           + [DISABLED] <- nid=30 [audio selector] [DISABLED]
hdac0: 
hdac0:             nid: 11
hdac0:            Name: pin: Mic (Pink Jack)
hdac0:      Widget cap: 0x00400183
hdac0:                  UNSOL STEREO
hdac0:     Association: 1 (0x00000001)
hdac0:             OSS: mic (mic)
hdac0:         Pin cap: 0x0000173f
hdac0:                  ISC TRQD PDC HP OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0:      Pin config: 0x02a19020
hdac0:     Pin control: 0x00000024 IN VREFs
hdac0:       Input amp: 0x00270300
hdac0:                  mute=0 step=3 size=39 offset=0
hdac0:     connections: 6
hdac0:           |
hdac0:           + [DISABLED] <- nid=21 [audio output] (selected)
hdac0:           + [DISABLED] <- nid=22 [audio output]
hdac0:           + [DISABLED] <- nid=23 [audio output]
hdac0:           + [DISABLED] <- nid=24 [audio output]
hdac0:           + [DISABLED] <- nid=25 [audio output] [DISABLED]
hdac0:           + [DISABLED] <- nid=30 [audio selector] [DISABLED]
hdac0: 
hdac0:             nid: 12
hdac0:            Name: pin: Speaker (Blue Jack)
hdac0:      Widget cap: 0x00400183
hdac0:                  UNSOL STEREO
hdac0:     Association: 0 (0x00000010)
hdac0:         Pin cap: 0x00001737
hdac0:                  ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0:      Pin config: 0x01113014
hdac0:     Pin control: 0x00000040 OUT
hdac0:       Input amp: 0x00270300
hdac0:                  mute=0 step=3 size=39 offset=0
hdac0:     connections: 6
hdac0:           |
hdac0:           + [DISABLED] <- nid=21 [audio output]
hdac0:           + [DISABLED] <- nid=22 [audio output]
hdac0:           + [DISABLED] <- nid=23 [audio output]
hdac0:           + <- nid=24 [audio output] (selected)
hdac0:           + [DISABLED] <- nid=25 [audio output] [DISABLED]
hdac0:           + [DISABLED] <- nid=30 [audio selector] [DISABLED]
hdac0: 
hdac0:             nid: 13
hdac0:            Name: pin: Speaker (Green Jack)
hdac0:      Widget cap: 0x00400183
hdac0:                  UNSOL STEREO
hdac0:     Association: 0 (0x00000001)
hdac0:         Pin cap: 0x0000003f
hdac0:                  ISC TRQD PDC HP OUT IN
hdac0:      Pin config: 0x01114010
hdac0:     Pin control: 0x00000040 OUT
hdac0:       Input amp: 0x00270300
hdac0:                  mute=0 step=3 size=39 offset=0
hdac0:     connections: 6
hdac0:           |
hdac0:           + <- nid=21 [audio output] (selected)
hdac0:           + [DISABLED] <- nid=22 [audio output]
hdac0:           + [DISABLED] <- nid=23 [audio output]
hdac0:           + [DISABLED] <- nid=24 [audio output]
hdac0:           + [DISABLED] <- nid=25 [audio output] [DISABLED]
hdac0:           + [DISABLED] <- nid=30 [audio selector] [DISABLED]
hdac0: 
hdac0:             nid: 14
hdac0:            Name: pin: Mic (Pink Jack)
hdac0:      Widget cap: 0x00400183
hdac0:                  UNSOL STEREO
hdac0:     Association: 2 (0x00000001)
hdac0:             OSS: monitor (monitor)
hdac0:         Pin cap: 0x00001737
hdac0:                  ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0:      Pin config: 0x01a19030
hdac0:     Pin control: 0x00000024 IN VREFs
hdac0:       Input amp: 0x00270300
hdac0:                  mute=0 step=3 size=39 offset=0
hdac0:     connections: 6
hdac0:           |
hdac0:           + [DISABLED] <- nid=21 [audio output] (selected)
hdac0:           + [DISABLED] <- nid=22 [audio output]
hdac0:           + [DISABLED] <- nid=23 [audio output]
hdac0:           + [DISABLED] <- nid=24 [audio output]
hdac0:           + [DISABLED] <- nid=25 [audio output] [DISABLED]
hdac0:           + [DISABLED] <- nid=30 [audio selector] [DISABLED]
hdac0: 
hdac0:             nid: 15
hdac0:            Name: pin: Speaker (Black Jack)
hdac0:      Widget cap: 0x00400183
hdac0:                  UNSOL STEREO
hdac0:     Association: 0 (0x00000004)
hdac0:         Pin cap: 0x00000037
hdac0:                  ISC TRQD PDC OUT IN
hdac0:      Pin config: 0x01111012
hdac0:     Pin control: 0x00000040 OUT
hdac0:       Input amp: 0x00270300
hdac0:                  mute=0 step=3 size=39 offset=0
hdac0:     connections: 6
hdac0:           |
hdac0:           + [DISABLED] <- nid=21 [audio output]
hdac0:           + [DISABLED] <- nid=22 [audio output]
hdac0:           + <- nid=23 [audio output] (selected)
hdac0:           + [DISABLED] <- nid=24 [audio output]
hdac0:           + [DISABLED] <- nid=25 [audio output] [DISABLED]
hdac0:           + [DISABLED] <- nid=30 [audio selector] [DISABLED]
hdac0: 
hdac0:             nid: 16
hdac0:            Name: pin: Speaker (Orange Jack)
hdac0:      Widget cap: 0x00400183
hdac0:                  UNSOL STEREO
hdac0:     Association: 0 (0x00000002)
hdac0:         Pin cap: 0x00000037
hdac0:                  ISC TRQD PDC OUT IN
hdac0:      Pin config: 0x01116011
hdac0:     Pin control: 0x00000040 OUT
hdac0:       Input amp: 0x00270300
hdac0:                  mute=0 step=3 size=39 offset=0
hdac0:     connections: 6
hdac0:           |
hdac0:           + [DISABLED] <- nid=21 [audio output]
hdac0:           + <- nid=22 [audio output] (selected)
hdac0:           + [DISABLED] <- nid=23 [audio output]
hdac0:           + [DISABLED] <- nid=24 [audio output]
hdac0:           + [DISABLED] <- nid=25 [audio output] [DISABLED]
hdac0:           + [DISABLED] <- nid=30 [audio selector] [DISABLED]
hdac0: 
hdac0:             nid: 17 [DISABLED]
hdac0:            Name: pin: Other (None)
hdac0:      Widget cap: 0x00400183
hdac0:                  UNSOL STEREO
hdac0:         Pin cap: 0x00000037
hdac0:                  ISC TRQD PDC OUT IN
hdac0:      Pin config: 0x40f000f0
hdac0:     Pin control: 0x00000000
hdac0:       Input amp: 0x00270300
hdac0:                  mute=0 step=3 size=39 offset=0
hdac0:     connections: 6
hdac0:           |
hdac0:           + <- nid=21 [audio output] (selected)
hdac0:           + <- nid=22 [audio output]
hdac0:           + <- nid=23 [audio output]
hdac0:           + <- nid=24 [audio output]
hdac0:           + <- nid=25 [audio output] [DISABLED]
hdac0:           + <- nid=30 [audio selector] [DISABLED]
hdac0: 
hdac0:             nid: 18 [DISABLED]
hdac0:            Name: pin: Other (None)
hdac0:      Widget cap: 0x00400081
hdac0:                  UNSOL STEREO
hdac0:         Pin cap: 0x00000024
hdac0:                  PDC IN
hdac0:      Pin config: 0x40f000f0
hdac0:     Pin control: 0x00000000
hdac0: 
hdac0:             nid: 19 [DISABLED]
hdac0:            Name: pin: Other (None)
hdac0:      Widget cap: 0x00400003
hdac0:                  STEREO
hdac0:         Pin cap: 0x00000020
hdac0:                  IN
hdac0:      Pin config: 0x40f000f0
hdac0:     Pin control: 0x00000000
hdac0:       Input amp: 0x00270300
hdac0:                  mute=0 step=3 size=39 offset=0
hdac0: 
hdac0:             nid: 20 [DISABLED]
hdac0:            Name: pin: Other (None)
hdac0:      Widget cap: 0x00400003
hdac0:                  STEREO
hdac0:         Pin cap: 0x00000020
hdac0:                  IN
hdac0:      Pin config: 0x40f000f0
hdac0:     Pin control: 0x00000000
hdac0:       Input amp: 0x00270300
hdac0:                  mute=0 step=3 size=39 offset=0
hdac0: 
hdac0:             nid: 21
hdac0:            Name: audio output
hdac0:      Widget cap: 0x000d0c05
hdac0:                  LRSWAP PWR STEREO
hdac0:     Association: 0 (0x00008001)
hdac0:             OSS: pcm (pcm)
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e05e0
hdac0:                  16 20 24 bits, 44 48 88 96 192 KHz
hdac0:      Output amp: 0x80027f7f
hdac0:                  mute=1 step=127 size=2 offset=127
hdac0: 
hdac0:             nid: 22
hdac0:            Name: audio output
hdac0:      Widget cap: 0x000d0c05
hdac0:                  LRSWAP PWR STEREO
hdac0:     Association: 0 (0x00000002)
hdac0:             OSS: pcm (pcm)
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e05e0
hdac0:                  16 20 24 bits, 44 48 88 96 192 KHz
hdac0:      Output amp: 0x80027f7f
hdac0:                  mute=1 step=127 size=2 offset=127
hdac0: 
hdac0:             nid: 23
hdac0:            Name: audio output
hdac0:      Widget cap: 0x000d0c05
hdac0:                  LRSWAP PWR STEREO
hdac0:     Association: 0 (0x00000004)
hdac0:             OSS: pcm (pcm)
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e05e0
hdac0:                  16 20 24 bits, 44 48 88 96 192 KHz
hdac0:      Output amp: 0x80027f7f
hdac0:                  mute=1 step=127 size=2 offset=127
hdac0: 
hdac0:             nid: 24
hdac0:            Name: audio output
hdac0:      Widget cap: 0x000d0c05
hdac0:                  LRSWAP PWR STEREO
hdac0:     Association: 0 (0x00000010)
hdac0:             OSS: pcm (pcm)
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e05e0
hdac0:                  16 20 24 bits, 44 48 88 96 192 KHz
hdac0:      Output amp: 0x80027f7f
hdac0:                  mute=1 step=127 size=2 offset=127
hdac0: 
hdac0:             nid: 25 [DISABLED]
hdac0:            Name: audio output
hdac0:      Widget cap: 0x000d0c05
hdac0:                  LRSWAP PWR STEREO
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e05e0
hdac0:                  16 20 24 bits, 44 48 88 96 192 KHz
hdac0:      Output amp: 0x80027f7f
hdac0:                  mute=1 step=127 size=2 offset=127
hdac0: 
hdac0:             nid: 26
hdac0:            Name: audio input
hdac0:      Widget cap: 0x001d0541
hdac0:                  PWR PROC STEREO
hdac0:     Association: 1 (0x00000001)
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e05e0
hdac0:                  16 20 24 bits, 44 48 88 96 192 KHz
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=32 [audio selector]
hdac0: 
hdac0:             nid: 27
hdac0:            Name: audio input
hdac0:      Widget cap: 0x001d0541
hdac0:                  PWR PROC STEREO
hdac0:     Association: 2 (0x00000001)
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e05e0
hdac0:                  16 20 24 bits, 44 48 88 96 192 KHz
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=33 [audio selector]
hdac0: 
hdac0:             nid: 28
hdac0:            Name: beep widget
hdac0:      Widget cap: 0x0070000c
hdac0:     Association: -2 (0x00000000)
hdac0:             OSS: speaker (speaker)
hdac0:      Output amp: 0x80170303
hdac0:                  mute=1 step=3 size=23 offset=3
hdac0: 
hdac0:             nid: 29
hdac0:            Name: audio mixer
hdac0:      Widget cap: 0x0020010b
hdac0:                  STEREO
hdac0:     Association: 1 (0x00000001)
hdac0:             OSS: mix (mix)
hdac0:       Input amp: 0x80051f17
hdac0:                  mute=1 step=31 size=5 offset=23
hdac0:     connections: 5
hdac0:           |
hdac0:           + <- nid=40 [audio selector]
hdac0:           + [DISABLED] <- nid=41 [audio selector] [DISABLED]
hdac0:           + <- nid=42 [audio selector]
hdac0:           + [DISABLED] <- nid=43 [audio selector] [DISABLED]
hdac0:           + [DISABLED] <- nid=18 [pin: Other (None)] [DISABLED]
hdac0: 
hdac0:             nid: 30 [DISABLED]
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x0030010d
hdac0:                  STEREO
hdac0:     Association: -2 (0x00000000)
hdac0:      Output amp: 0x80051f1f
hdac0:                  mute=1 step=31 size=5 offset=31
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=29 [audio mixer]
hdac0: 
hdac0:             nid: 31 [DISABLED]
hdac0:            Name: volume widget
hdac0:      Widget cap: 0x00600000
hdac0:     connections: 5
hdac0:           |
hdac0:           + <- nid=21 [audio output] (selected)
hdac0:           + <- nid=22 [audio output]
hdac0:           + <- nid=23 [audio output]
hdac0:           + <- nid=24 [audio output]
hdac0:           + <- nid=25 [audio output] [DISABLED]
hdac0: 
hdac0:             nid: 32
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x0030090d
hdac0:                  LRSWAP STEREO
hdac0:     Association: 1 (0x00000001)
hdac0:             OSS: mic, mix
hdac0:      Output amp: 0x80050f00
hdac0:                  mute=1 step=15 size=5 offset=0
hdac0:     connections: 12
hdac0:           |
hdac0:           + [DISABLED] <- nid=10 [pin: Headphones (Green Jack)]
hdac0:           + <- nid=11 [pin: Mic (Pink Jack)] (selected)
hdac0:           + [DISABLED] <- nid=12 [pin: Speaker (Blue Jack)]
hdac0:           + [DISABLED] <- nid=13 [pin: Speaker (Green Jack)]
hdac0:           + [DISABLED] <- nid=14 [pin: Mic (Pink Jack)]
hdac0:           + [DISABLED] <- nid=15 [pin: Speaker (Black Jack)]
hdac0:           + [DISABLED] <- nid=16 [pin: Speaker (Orange Jack)]
hdac0:           + [DISABLED] <- nid=17 [pin: Other (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=18 [pin: Other (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=19 [pin: Other (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=20 [pin: Other (None)] [DISABLED]
hdac0:           + <- nid=29 [audio mixer]
hdac0: 
hdac0:             nid: 33
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x0030090d
hdac0:                  LRSWAP STEREO
hdac0:     Association: 2 (0x00000001)
hdac0:             OSS: monitor
hdac0:      Output amp: 0x80050f00
hdac0:                  mute=1 step=15 size=5 offset=0
hdac0:     connections: 12
hdac0:           |
hdac0:           + [DISABLED] <- nid=10 [pin: Headphones (Green Jack)]
hdac0:           + [DISABLED] <- nid=11 [pin: Mic (Pink Jack)]
hdac0:           + [DISABLED] <- nid=12 [pin: Speaker (Blue Jack)]
hdac0:           + [DISABLED] <- nid=13 [pin: Speaker (Green Jack)]
hdac0:           + <- nid=14 [pin: Mic (Pink Jack)] (selected)
hdac0:           + [DISABLED] <- nid=15 [pin: Speaker (Black Jack)]
hdac0:           + [DISABLED] <- nid=16 [pin: Speaker (Orange Jack)]
hdac0:           + [DISABLED] <- nid=17 [pin: Other (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=18 [pin: Other (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=19 [pin: Other (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=20 [pin: Other (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=29 [audio mixer]
hdac0: 
hdac0:             nid: 34 [DISABLED]
hdac0:            Name: pin: Other (None)
hdac0:      Widget cap: 0x00400301
hdac0:                  DIGITAL STEREO
hdac0:         Pin cap: 0x00000010
hdac0:                  OUT
hdac0:      Pin config: 0x40f000f0
hdac0:     Pin control: 0x00000000
hdac0:     connections: 3
hdac0:           |
hdac0:           + <- nid=37 [audio output] [DISABLED] (selected)
hdac0:           + <- nid=32 [audio selector]
hdac0:           + <- nid=33 [audio selector]
hdac0: 
hdac0:             nid: 35
hdac0:            Name: pin: SPDIF-out (Black Jack)
hdac0:      Widget cap: 0x00400301
hdac0:                  DIGITAL STEREO
hdac0:     Association: 3 (0x00000001)
hdac0:         Pin cap: 0x00000010
hdac0:                  OUT
hdac0:      Pin config: 0x01451140
hdac0:     Pin control: 0x00000040 OUT
hdac0:     connections: 3
hdac0:           |
hdac0:           + <- nid=38 [audio output] (selected)
hdac0:           + [DISABLED] <- nid=32 [audio selector]
hdac0:           + [DISABLED] <- nid=33 [audio selector]
hdac0: 
hdac0:             nid: 36 [DISABLED]
hdac0:            Name: pin: Other (None)
hdac0:      Widget cap: 0x00400681
hdac0:                  PWR DIGITAL UNSOL STEREO
hdac0:         Pin cap: 0x00010024
hdac0:                  PDC IN EAPD
hdac0:      Pin config: 0x40f000f0
hdac0:     Pin control: 0x00000000
hdac0:            EAPD: 0x00000002
hdac0: 
hdac0:             nid: 37 [DISABLED]
hdac0:            Name: audio output
hdac0:      Widget cap: 0x0004021d
hdac0:                  DIGITAL STEREO
hdac0:      Stream cap: 0x00000005
hdac0:                  AC3 PCM
hdac0:         PCM cap: 0x000e05e0
hdac0:                  16 20 24 bits, 44 48 88 96 192 KHz
hdac0:      Output amp: 0x80000000
hdac0:                  mute=1 step=0 size=0 offset=0
hdac0: 
hdac0:             nid: 38
hdac0:            Name: audio output
hdac0:      Widget cap: 0x0004021d
hdac0:                  DIGITAL STEREO
hdac0:     Association: 3 (0x00000001)
hdac0:             OSS: pcm (pcm)
hdac0:      Stream cap: 0x00000005
hdac0:                  AC3 PCM
hdac0:         PCM cap: 0x000e05e0
hdac0:                  16 20 24 bits, 44 48 88 96 192 KHz
hdac0:      Output amp: 0x80000000
hdac0:                  mute=1 step=0 size=0 offset=0
hdac0: 
hdac0:             nid: 39 [DISABLED]
hdac0:            Name: audio input
hdac0:      Widget cap: 0x0014031b
hdac0:                  DIGITAL STEREO
hdac0:      Stream cap: 0x00000005
hdac0:                  AC3 PCM
hdac0:         PCM cap: 0x000e0160
hdac0:                  16 20 24 bits, 44 48 96 KHz
hdac0:       Input amp: 0x80000000
hdac0:                  mute=1 step=0 size=0 offset=0
hdac0:     connections: 1
hdac0:           |
hdac0:           + [DISABLED] <- nid=36 [pin: Other (None)] [DISABLED]
hdac0: 
hdac0:             nid: 40
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x00300101
hdac0:                  STEREO
hdac0:     Association: 1 (0x00000001)
hdac0:             OSS: mic
hdac0:     connections: 4
hdac0:           |
hdac0:           + [DISABLED] <- nid=10 [pin: Headphones (Green Jack)]
hdac0:           + <- nid=11 [pin: Mic (Pink Jack)] (selected)
hdac0:           + [DISABLED] <- nid=13 [pin: Speaker (Green Jack)]
hdac0:           + [DISABLED] <- nid=15 [pin: Speaker (Black Jack)]
hdac0: 
hdac0:             nid: 41 [DISABLED]
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x00300101
hdac0:                  STEREO
hdac0:     connections: 4
hdac0:           |
hdac0:           + <- nid=10 [pin: Headphones (Green Jack)] (selected)
hdac0:           + <- nid=14 [pin: Mic (Pink Jack)]
hdac0:           + <- nid=16 [pin: Speaker (Orange Jack)]
hdac0:           + [DISABLED] <- nid=17 [pin: Other (None)] [DISABLED]
hdac0: 
hdac0:             nid: 42
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x00300101
hdac0:                  STEREO
hdac0:     Association: 1 (0x00000001)
hdac0:             OSS: mic
hdac0:     connections: 4
hdac0:           |
hdac0:           + <- nid=11 [pin: Mic (Pink Jack)] (selected)
hdac0:           + [DISABLED] <- nid=12 [pin: Speaker (Blue Jack)]
hdac0:           + [DISABLED] <- nid=16 [pin: Speaker (Orange Jack)]
hdac0:           + [DISABLED] <- nid=17 [pin: Other (None)] [DISABLED]
hdac0: 
hdac0:             nid: 43 [DISABLED]
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x00300101
hdac0:                  STEREO
hdac0:     connections: 4
hdac0:           |
hdac0:           + <- nid=21 [audio output] (selected)
hdac0:           + <- nid=22 [audio output]
hdac0:           + <- nid=23 [audio output]
hdac0:           + <- nid=24 [audio output]
hdac0: 
pcm0: <HDA IDT 92HD73E1 PCM #0 Analog> at cad 2 nid 1 on hdac0
pcm0: +--------------------------------------+
pcm0: | DUMPING PCM Playback/Record Channels |
pcm0: +--------------------------------------+
pcm0: 
pcm0: Playback:
pcm0: 
pcm0:      Stream cap: 0x00000001
pcm0:                  PCM
pcm0:         PCM cap: 0x000e05e0
pcm0:                  16 20 24 bits, 44 48 88 96 192 KHz
pcm0:             DAC: 21 22 23 24
pcm0: 
pcm0: Record:
pcm0: 
pcm0:      Stream cap: 0x00000001
pcm0:                  PCM
pcm0:         PCM cap: 0x000e05e0
pcm0:                  16 20 24 bits, 44 48 88 96 192 KHz
pcm0:             ADC: 26
pcm0: 
pcm0: +-------------------------------+
pcm0: | DUMPING Playback/Record Paths |
pcm0: +-------------------------------+
pcm0: 
pcm0: Playback:
pcm0: 
pcm0:     nid=13 [pin: Speaker (Green Jack)]
pcm0:       |
pcm0:       + <- nid=21 [audio output] [src: pcm]
pcm0: 
pcm0:     nid=16 [pin: Speaker (Orange Jack)]
pcm0:       |
pcm0:       + <- nid=22 [audio output] [src: pcm]
pcm0: 
pcm0:     nid=15 [pin: Speaker (Black Jack)]
pcm0:       |
pcm0:       + <- nid=23 [audio output] [src: pcm]
pcm0: 
pcm0:     nid=12 [pin: Speaker (Blue Jack)]
pcm0:       |
pcm0:       + <- nid=24 [audio output] [src: pcm]
pcm0: 
pcm0:     nid=10 [pin: Headphones (Green Jack)]
pcm0:       |
pcm0:       + <- nid=21 [audio output] [src: pcm]
pcm0: 
pcm0: Record:
pcm0: 
pcm0:     nid=26 [audio input]
pcm0:       |
pcm0:       + <- nid=32 [audio selector] [src: mic, mix]
pcm0:              |
pcm0:              + <- nid=11 [pin: Mic (Pink Jack)] [src: mic]
pcm0:              + <- nid=29 [audio mixer] [src: mix]
pcm0: 
pcm0: Input Mix:
pcm0: 
pcm0:     nid=29 [audio mixer]
pcm0:       |
pcm0:       + <- nid=40 [audio selector] [src: mic]
pcm0:              |
pcm0:              + <- nid=11 [pin: Mic (Pink Jack)] [src: mic]
pcm0:       + <- nid=42 [audio selector] [src: mic]
pcm0:              |
pcm0:              + <- nid=11 [pin: Mic (Pink Jack)] [src: mic]
pcm0: 
pcm0: +-------------------------+
pcm0: | DUMPING Volume Controls |
pcm0: +-------------------------+
pcm0: 
pcm0: Master Volume (OSS: vol)
pcm0:    |
pcm0:    +- ctl 11 (nid  21 out):    -95/0dB (128 steps) + mute
pcm0:    +- ctl 12 (nid  22 out):    -95/0dB (128 steps) + mute
pcm0:    +- ctl 13 (nid  23 out):    -95/0dB (128 steps) + mute
pcm0:    +- ctl 14 (nid  24 out):    -95/0dB (128 steps) + mute
pcm0: 
pcm0: PCM Volume (OSS: pcm)
pcm0:    |
pcm0:    +- ctl 11 (nid  21 out):    -95/0dB (128 steps) + mute
pcm0:    +- ctl 12 (nid  22 out):    -95/0dB (128 steps) + mute
pcm0:    +- ctl 13 (nid  23 out):    -95/0dB (128 steps) + mute
pcm0:    +- ctl 14 (nid  24 out):    -95/0dB (128 steps) + mute
pcm0: 
pcm0: Microphone Volume (OSS: mic)
pcm0:    |
pcm0:    +- ctl  2 (nid  11 out):    0/30dB (4 steps)
pcm0: 
pcm0: Speaker/Beep Volume (OSS: speaker)
pcm0:    |
pcm0:    +- ctl 16 (nid  28 out):    -18/0dB (4 steps) + mute
pcm0: 
pcm0: Recording Level (OSS: rec)
pcm0:    |
pcm0:    +- ctl 23 (nid  32 out):    0/22dB (16 steps) + mute
pcm0: 
pcm0: Input Mix Level (OSS: mix)
pcm0:    |
pcm0:    +- ctl 17 (nid  29 in   0): -34/12dB (32 steps) + mute
pcm0:    +- ctl 19 (nid  29 in   2): -34/12dB (32 steps) + mute
pcm0: 
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "mic":
pcm0: Mixer "mix":
pcm0: Mixer "rec":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 21a0000, 4000; 0xe6aab000 -> 21a0000
pcm0: sndbuf_setmap 21b0000, 4000; 0xe6abb000 -> 21b0000
pcm1: <HDA IDT 92HD73E1 PCM #1 Analog> at cad 2 nid 1 on hdac0
pcm1: +--------------------------------------+
pcm1: | DUMPING PCM Playback/Record Channels |
pcm1: +--------------------------------------+
pcm1: 
pcm1: Record:
pcm1: 
pcm1:      Stream cap: 0x00000001
pcm1:                  PCM
pcm1:         PCM cap: 0x000e05e0
pcm1:                  16 20 24 bits, 44 48 88 96 192 KHz
pcm1:             ADC: 27
pcm1: 
pcm1: +-------------------------------+
pcm1: | DUMPING Playback/Record Paths |
pcm1: +-------------------------------+
pcm1: 
pcm1: Record:
pcm1: 
pcm1:     nid=27 [audio input]
pcm1:       |
pcm1:       + <- nid=33 [audio selector] [src: monitor]
pcm1:              |
pcm1:              + <- nid=14 [pin: Mic (Pink Jack)] [src: monitor]
pcm1: 
pcm1: +-------------------------+
pcm1: | DUMPING Volume Controls |
pcm1: +-------------------------+
pcm1: 
pcm1: Microphone2 Volume (OSS: monitor)
pcm1:    |
pcm1:    +- ctl  5 (nid  14 out):    0/30dB (4 steps)
pcm1: 
pcm1: Recording Level (OSS: rec)
pcm1:    |
pcm1:    +- ctl 24 (nid  33 out):    0/22dB (16 steps) + mute
pcm1: 
pcm1: Mixer "rec":
pcm1: Mixer "monitor":
pcm1: clone manager: deadline=750ms flags=0x8000001e
pcm1: sndbuf_setmap 21c0000, 4000; 0xe6acb000 -> 21c0000
pcm2: <HDA IDT 92HD73E1 PCM #2 Digital> at cad 2 nid 1 on hdac0
pcm2: +--------------------------------------+
pcm2: | DUMPING PCM Playback/Record Channels |
pcm2: +--------------------------------------+
pcm2: 
pcm2: Playback:
pcm2: 
pcm2:      Stream cap: 0x00000005
pcm2:                  AC3 PCM
pcm2:         PCM cap: 0x000e05e0
pcm2:                  16 20 24 bits, 44 48 88 96 192 KHz
pcm2:             DAC: 38
pcm2: 
pcm2: +-------------------------------+
pcm2: | DUMPING Playback/Record Paths |
pcm2: +-------------------------------+
pcm2: 
pcm2: Playback:
pcm2: 
pcm2:     nid=35 [pin: SPDIF-out (Black Jack)]
pcm2:       |
pcm2:       + <- nid=38 [audio output] [src: pcm]
pcm2: 
pcm2: +-------------------------+
pcm2: | DUMPING Volume Controls |
pcm2: +-------------------------+
pcm2: 
pcm2: Master Volume (OSS: vol)
pcm2:    |
pcm2:    +- ctl 26 (nid  38 out):    mute
pcm2: 
pcm2: PCM Volume (OSS: pcm)
pcm2:    |
pcm2:    +- ctl 26 (nid  38 out):    mute
pcm2: 
pcm2: Enabling Soft PCM volume
pcm2: Mixer "vol":
pcm2: Mixer "pcm":
pcm2: Soft PCM mixer ENABLED
pcm2: clone manager: deadline=750ms flags=0x8000001e
pcm2: sndbuf_setmap 21d0000, 4000; 0xe6adb000 -> 21d0000
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
usbus7: 480Mbps High Speed USB v2.0
ahcich0: AHCI reset...
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ahcich0: SATA connect time=0ms status=00000113
ahcich0: ready wait time=1ms
ahcich0: AHCI reset done: device found
(aprobe0:ahcich0:0:0:0): SIGNATURE: eb14
firewire0: New S400 device ID:00902700022b34b9
ahcich1: AHCI reset...
ahcich1: SATA connect time=0ms status=00000123
ahcich1: ready wait time=1ms
ahcich1: AHCI reset done: device found
(aprobe0:ahcich1:0:0:0): SIGNATURE: 0000
ahcich2: AHCI reset...
ahcich2: SATA connect timeout status=00000000
ahcich2: AHCI reset done: phy reset found no device
ahcich3: AHCI reset...
ahcich3: SATA connect timeout status=00000000
ahcich3: AHCI reset done: phy reset found no device
ahcich4: AHCI reset...
ahcich4: SATA connect time=0ms status=00000113
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
ahcich4: ready wait time=151ms
ahcich4: AHCI reset done: device found
(aprobe0:ahcich4:0:0:0): SIGNATURE: 0000
ahcich5: AHCI reset...
ahcich5: SATA connect time=0ms status=00000123
ahcich5: ready wait time=1ms
ahcich5: AHCI reset done: device found
(aprobe0:ahcich5:0:0:0): SIGNATURE: 0000
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ada0 at ahcich1 bus 0 scbus1 target 0 lun 0(cd0:ahcich0:0:0:0): SCSI status error
(cd0:ahcich0:0:0:0): Requesting SCSI sense data
GEOM: new disk cd0(cd0:ahcich0:0:0:0): SCSI status error
(cd0:ahcich0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ahcich0:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich0:0:0:0): SCSI status: Check Condition
(cd0:ahcich0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
(cd0:ahcich0:0:0:0): Error 6, Unretryable error
cd0 at ahcich0 bus 0 scbus0 target 0 lun 0
cd0: <ASUS DRW-20B1LT 1.00> Removable CD-ROM SCSI-0 device 
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed

GEOM: new disk ada0

ada0: <SAMSUNG HD501LJ CR100-13> ATA-8(cd0:ahcich0:0:0:0): SCSI status error
(cd0:ahcich0:0:0:0): Requesting SCSI sense data
 SATA 2.x(cd0:ahcich0:0:0:0): SCSI status error
(cd0:ahcich0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ahcich0:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich0:0:0:0): SCSI status: Check Condition
(cd0:ahcich0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
(cd0:ahcich0:0:0:0): Error 6, Unretryable error
 device
ada0: Serial Number S0MUJ1CQ953954
ada0: 300.000MB/s transfers(cd0:ahcich0:0:0:0): SCSI status error
(cd0:ahcich0:0:0:0): Requesting SCSI sense data
 (SATA 2.x, (cd0:ahcich0:0:0:0): SCSI status error
(cd0:ahcich0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ahcich0:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich0:0:0:0): SCSI status: Check Condition
(cd0:ahcich0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
(cd0:ahcich0:0:0:0): Error 6, Unretryable error
UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada1 at ahcich4 bus 0 scbus4 target 0 lun 0
ada1: <ST3120026AS 3.05> ATA-6 SATA 1.x device
ada1: Serial Number 3JT19PDK
ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada1: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C)
ada2 at ahcich5 bus 0 scbus5 target 0 lun 0
ada2: <Maxtor 6V300F0 VA111630> ATA-7 SATA 2.x device
ada2: Serial Number V6003L6G
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 286188MB (586114704 512 byte sectors: 16H 63S/T 16383C)
pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
pass0: <ASUS DRW-20B1LT 1.00> Removable CD-ROM SCSI-0 device 
pass0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytesGEOM: new disk ada1
GEOM: new disk ada2
)GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s).

pass1 at ahcich1 bus 0 scbus1 target 0 lun 0
pass1: <SAMSUNG HD501LJ CR100-13> ATA-8 SATA 2.x device
pass1: Serial Number S0MUJ1CQ953954
pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass1: Command Queueing enabled
pass2 at ahcich4 bus 0 scbus4 target 0 lun 0
pass2: <ST3120026AS 3.05> ATA-6 SATA 1.x device
pass2: Serial Number 3JT19PDK
pass2: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
pass3 at ahcich5 bus 0 scbus5 target 0 lun 0
pass3: <Maxtor 6V300F0 VA111630> ATA-7 SATA 2.x device
pass3: Serial Number V6003L6G
pass3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass3: Command Queueing enabled
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x03000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x02000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 1 vector 48
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 2 vector 48
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 3 vector 48
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 1 vector 49
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 2 vector 49
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 3 vector 49
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 50
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 2 vector 50
msi: Assigning MSI IRQ 256 to local APIC 3 vector 50
msi: Assigning MSI IRQ 258 to local APIC 1 vector 51
GEOM: ada2s1: geometry does not match label (255h,63s != 16h,63s).
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/label/nova_root
ct_to_ts([2010-02-21 22:19:37]) = 1266790777.000000000
start_init: trying /sbin/init
Setting hostuuid: 0b62e73c-7614-11dd-876d-0011d8a408ed.
Setting hostid: 0xaa6d5853.
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
 kickstart
.
Starting file system checks:
/dev/label/nova_root: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/label/nova_root: clean, 49858 free (1834 frags, 6003 blocks, 0.7% fragmentation)
/dev/label/nova_tmp: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/label/nova_tmp: clean, 216598 free (46 frags, 27069 blocks, 0.0% fragmentation)
/dev/label/nova_var: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/label/nova_var: clean, 1928985 free (481 frags, 241063 blocks, 0.0% fragmentation)
/dev/label/nova_usr: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/label/nova_usr: clean, 113884848 free (13856 frags, 14233874 blocks, 0.0% fragmentation)
Mounting local file systems:
.
ugen0.2: <ALCOR> at usbus0
uhub8: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus0
ugen1.2: <DATACOMP> at usbus1
ukbd0: <DATACOMP SteelSDATA, class 0/0, rev 1.10/0.01, addr 2> on usbus1
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums0: <DATACOMP SteelSDATA, class 0/0, rev 1.10/0.01, addr 2> on usbus1
uhub8: 4 ports with 4 removable, self powered
Setting hostname: nova
.
ugen0.3: <SteelSeries ApS> at usbus0
ums1: <SteelSeries ApS Ikari Laser, class 0/0, rev 2.00/1.00, addr 3> on usbus0
ums1: 7 buttons and [XYZ] coordinates ID=2
em0: Link is up 1000 Mbps Full Duplex
em0: Link is Down
Starting Network: lo0 em0 fwip0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=3<RXCSUM,TXCSUM>
	inet 127.0.0.1 netmask 0xff000000 
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC>
	ether 00:1c:c0:8c:09:d9
	inet 192.168.100.106 netmask 0xffffff00 broadcast 192.168.100.255
	inet6 fe80::21c:c0ff:fe8c:9d9%em0 prefixlen 64 tentative scopeid 0x1 
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
	media: Ethernet 1000baseT <full-duplex> (autoselect)
	status: no carrier
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	lladdr 0.90.27.0.2.2b.34.ed.a.2.ff.fe.0.0.0.0
Starting devd.
Starting Network: fwip0.
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	lladdr 0.90.27.0.2.2b.34.ed.a.2.ff.fe.0.0.0.0
Starting ums0 moused
.
Starting ums1 moused
.
add net default: gateway 192.168.100.1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
Mounting NFS file systems:
em0: Link is up 1000 Mbps Full Duplex
.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/graphviz /usr/local/lib/zsh
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Creating and/or trimming log files
.
Starting syslogd.
No core dumps found.
Clearing /tmp (X related).
Updating motd:
.
Starting ntpd.
Configuring syscons:
 blanktime
.
Starting sshd.
Starting cron.

Sun Feb 21 22:19:46 WST 2010
ts_to_ct(1266790796.233520028) = [2010-02-21 22:19:56]
Feb 21 22:20:50 nova su: agh to root on /dev/ttyv0

--Boundary-00=_wOUgLhXx5DHjWT4
Content-Type: text/plain; charset="ISO-8859-1";
	name="DP45SG-i386.mptable-device"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
	filename="DP45SG-i386.mptable-device"


===============================================================================

MPTable

-------------------------------------------------------------------------------

MP Floating Pointer Structure:

  location:			BIOS
  physical address:		0x000fd4e0
  signature:			'_MP_'
  length:			16 bytes
  version:			1.4
  checksum:			0x7f
  mode:				Virtual Wire

-------------------------------------------------------------------------------

MP Config Table Header:

  physical address:		0x000fd240
  signature:			'PCMP'
  base table length:		564
  version:			1.4
  checksum:			0xc1
  OEM ID:			'DP45SG'
  Product ID:			'INTEL'
  OEM table pointer:		0x00000000
  OEM table size:		0
  entry count:			59
  local APIC address:		0xfee00000
  extended table length:	104
  extended table checksum:	45

-------------------------------------------------------------------------------

MP Config Base Table Entries:

--
Processors:	APIC ID	Version	State		Family	Model	Step	Flags
		 0	 0x14	 BSP, usable	 6	 7	 10	 0xbfebfbff
		 1	 0x14	 AP, usable	 6	 7	 10	 0xbfebfbff
		 2	 0x14	 AP, usable	 6	 7	 10	 0xbfebfbff
		 3	 0x14	 AP, usable	 6	 7	 10	 0xbfebfbff
--
Bus:		Bus ID	Type
		 0	 PCI   
		 1	 PCI   
		 2	 PCI   
		 3	 ISA   
--
I/O APICs:	APIC ID	Version	State		Address
		 0	 0x20	 usable		 0xfec00000
--
I/O Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
		INT	 conforms    conforms	     3	   0	      0	   2
		INT	 conforms    conforms	     3	   1	      0	   1
		INT	 conforms    conforms	     3	   4	      0	   4
		INT	 conforms    conforms	     3	   8	      0	   8
		INT	active-hi       level	     3	   9	      0	   9
		INT	 conforms    conforms	     3	  12	      0	  12
		INT	 conforms    conforms	     3	  13	      0	  13
		INT	 conforms    conforms	     3	  14	      0	  14
		INT	 conforms    conforms	     3	  15	      0	  15
		INT	 conforms    conforms	     0	 6:A	      0	  16
		INT	 conforms    conforms	     0	 6:B	      0	  17
		INT	 conforms    conforms	     0	 6:C	      0	  18
		INT	 conforms    conforms	     0	 6:D	      0	  19
		INT	 conforms    conforms	     0	 1:A	      0	  16
		INT	 conforms    conforms	     0	 1:B	      0	  17
		INT	 conforms    conforms	     0	 1:C	      0	  18
		INT	 conforms    conforms	     0	 1:D	      0	  19
		INT	 conforms    conforms	     0	31:A	      0	  18
		INT	 conforms    conforms	     0	31:B	      0	  19
		INT	 conforms    conforms	     0	31:C	      0	  18
		INT	 conforms    conforms	     0	22:A	      0	  18
		INT	 conforms    conforms	     0	22:B	      0	  19
		INT	 conforms    conforms	     0	27:A	      0	  22
		INT	 conforms    conforms	     2	 0:A	      0	  19
		INT	 conforms    conforms	     2	 2:A	      0	  20
		INT	 conforms    conforms	     2	 2:B	      0	  21
		INT	 conforms    conforms	     2	 2:C	      0	  22
		INT	 conforms    conforms	     2	 2:D	      0	  23
		INT	 conforms    conforms	     2	 3:A	      0	  21
		INT	 conforms    conforms	     2	 3:B	      0	  22
		INT	 conforms    conforms	     2	 3:C	      0	  23
		INT	 conforms    conforms	     2	 3:D	      0	  20
		INT	 conforms    conforms	     2	 4:A	      0	  22
		INT	 conforms    conforms	     2	 4:B	      0	  23
		INT	 conforms    conforms	     2	 4:C	      0	  20
		INT	 conforms    conforms	     2	 4:D	      0	  21
		INT	 conforms    conforms	     0	25:A	      0	  20
		INT	 conforms    conforms	     0	29:A	      0	  23
		INT	 conforms    conforms	     0	29:B	      0	  19
		INT	 conforms    conforms	     0	29:C	      0	  18
		INT	 conforms    conforms	     0	26:A	      0	  16
		INT	 conforms    conforms	     0	26:B	      0	  21
		INT	 conforms    conforms	     0	26:C	      0	  18
		INT	 conforms    conforms	     0	26:D	      0	  16
		INT	 conforms    conforms	     0	28:A	      0	  17
		INT	 conforms    conforms	     0	28:B	      0	  16
		INT	 conforms    conforms	     0	28:C	      0	  18
		INT	 conforms    conforms	     0	28:D	      0	  19
--
Local Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
		ExtINT	 conforms    conforms	     0	 0:A	    255	   0
		NMI	 conforms    conforms	     0	 0:A	    255	   1

-------------------------------------------------------------------------------

MP Config Extended Table Entries:

--
System Address Space
 bus ID: 0 address type: I/O address
 address base: 0xd000
 address range: 0x2160
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xd0000000
 address range: 0x10227000
--
System Address Space
 bus ID: 0 address type: I/O address
 address base: 0x0
 address range: 0x1000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xa0000
 address range: 0x20000
--
Bus Hierarchy
 bus ID: 3 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
 bus ID: 0 address modifier: add
 predefined range: 0x00000000
--
Compatibility Bus Address
 bus ID: 0 address modifier: add
 predefined range: 0x00000001

===============================================================================


--Boundary-00=_wOUgLhXx5DHjWT4--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201002212231.12018.agh>