Date: Sun, 30 Nov 2014 01:22:41 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-bugs@FreeBSD.org Subject: [Bug 195516] New: FreeBSD/i386 10.0-RELEASE does not boot on Panasonic CF-R3 Message-ID: <bug-195516-8@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=195516 Bug ID: 195516 Summary: FreeBSD/i386 10.0-RELEASE does not boot on Panasonic CF-R3 Product: Base System Version: 10.1-RELEASE Hardware: i386 OS: Any Status: New Severity: Affects Only Me Priority: --- Component: kern Assignee: freebsd-bugs@FreeBSD.org Reporter: ryo_on@yk.rim.or.jp Created attachment 150015 --> https://bugs.freebsd.org/bugzilla/attachment.cgi?id=150015&action=edit Screen shot of last messages Panasonic CF-R3 is i386 machine. Using FreeBSD-10.1-RELEASE-i386-memstick.img.xz, FreeBSD does not boot. Last message is the following. agp1: <Intel 82855GME (855GME GMCH) SCGA controller> on vgapci0 panic: make_dev_credv: bad si_name (error 17, si_name=agpgart) cpuid = 0 KDB: (snap) NetBSD/i386 6.1.5 boots without problem. The attached JPEG file is screen shot of last messages. dmesg output from NetBSD/i386 6.1.5 is the following. Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.1.5 (GENERIC) total memory = 246 MB avail memory = 229 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 Matsushita Electric Industrial Co.,Ltd. CF-R3EW1AXR (002) mainbus0 (root) cpu0 at mainbus0: Intel(R) Pentium(R) M processor 1.10GHz, id 0x6d6 acpi0 at mainbus0: Intel ACPICA 20110623 acpi0: X/RSDT: OemId <PTLTD , RSDT ,06040000>, AslId < LTP,00000000> LNKC: ACPI: Found matching pin for 0.31.INTA at func 1: 255 LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 9 LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 9 LNKH: ACPI: Found matching pin for 0.29.INTD at func 7: 11 LNKA: ACPI: Found matching pin for 0.2.INTA at func 0: 9 LNKG: ACPI: Found matching pin for 2.5.INTA at func 0: 255 LNKE: ACPI: Found matching pin for 2.5.INTB at func 1: 5 LNKD: ACPI: Found matching pin for 2.1.INTA at func 0: 3 LNKF: ACPI: Found matching pin for 2.4.INTA at func 0: 7 acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66 RBAR (PNP0C02) at acpi0 not configured acpivga0 at acpi0 (GRFX): ACPI Display Adapter acpiout0 at acpivga0 (CRT1, 0x0100): ACPI Display Output Device acpiout1 at acpivga0 (LCD1, 0x0400): ACPI Display Output Device acpivga0: connected output devices: acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0, bios detect acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0, bios detect MBRD (PNP0C02) at acpi0 not configured attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 npx1 at acpi0 (MATH, PNP0C04): io 0xf0-0xff irq 13 npx1: reported by CPUID; using exception 16 pckbc1 at acpi0 (K106, PNP0320) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU3, SYN0002) (aux port): irq 12 acpibut0 at acpi0 (PWRB, PNP0C0C-0): ACPI Power Button acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter acpibat0 at acpi0 (BATA, PNP0C0A-0): ACPI Battery acpibat0: Panasonic LION rechargeable battery acpibat0: granularity: low->warn 0.010 Wh, warn->full 0.010 Wh HKEY (MAT0019) at acpi0 not configured acpilid0 at acpi0 (LID, PNP0C0D-0): ACPI Lid Switch acpitz0 at acpi0 (TZC): cpu0 acpitz0: levels: critical 102.8 C, passive 85.8 C, passive cooling apm0 at acpi0: Power Management spec V1.2 attimer1: attached to pcppi1 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc1 (aux slot) pms0: Synaptics touchpad version 5.9 pms0: Palm detect, Multi-finger pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3580 (rev. 0x02) agp0 at pchb0: detected 8060k stolen memory agp0: aperture at 0xe8000000, size 0x8000000 vendor 0x8086 product 0x3584 (miscellaneous system, revision 0x02) at pci0 dev 0 function 1 not configured vendor 0x8086 product 0x3585 (miscellaneous system, revision 0x02) at pci0 dev 0 function 3 not configured ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3581 (rev. 0x02) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x3582 (rev. 0x02) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 i915drm0 at vga1: Intel i852GM/i855GM GMCH i915drm0: AGP at 0xe8000000 128MB i915drm0: Initialized i915 1.6.0 20080730 vendor 0x8086 product 0x3582 (miscellaneous display, revision 0x02) at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24c2 (rev. 0x03) uhci0: interrupting at irq 9 usb0 at uhci0: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24cd (rev. 0x03) ehci0: interrupting at irq 11 ehci0: EHCI version 1.0 ehci0: companion controller, 2 ports each: uhci0 usb1 at ehci0: USB revision 2.0 ppb1 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x83) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled rtk0 at pci2 dev 1 function 0: Realtek 8139 10/100BaseTX (rev. 0x10) rtk0: interrupting at irq 3 rtk0: Ethernet address 00:0b:97:28:60:66 rlphy0 at rtk0 phy 7: Realtek internal PHY rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto iwi0 at pci2 dev 4 function 0: vendor 0x8086 product 0x4223 (rev. 0x05) iwi0: interrupting at irq 7 iwi0: 802.11 address 00:0e:35:7c:7c:6c iwi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps cbb0 at pci2 dev 5 function 0: vendor 0x1180 product 0x0475 (rev. 0x88) vendor 0x1180 product 0x0575 (miscellaneous system) at pci2 dev 5 function 1 not configured cbb0: cacheline 0x0 lattimer 0x40 cbb0: bhlc 0x824000 LNKG: Picked IRQ 9 with weight 3 cbb0: interrupting at irq 9 cardslot0 at cbb0 cardbus0 at cardslot0: bus 3 pcmcia0 at cardslot0 ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x24cc (rev. 0x03) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer ichlpcib0: TCO (watchdog) timer configured. ichlpcib0: SpeedStep enabled gpio0 at ichlpcib0: 64 pins piixide0 at pci0 dev 31 function 1: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x03) piixide0: bus-master DMA support present piixide0: primary channel configured to compatibility mode piixide0: primary channel interrupting at irq 14 atabus0 at piixide0 channel 0 piixide0: secondary channel configured to compatibility mode piixide0: secondary channel ignored (disabled) ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x24c3 (rev. 0x03) ichsmb0: interrupting at irq 9 iic0 at ichsmb0: I2C bus auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio auich0: interrupting at irq 9 auich0: ac97: SigmaTel STAC9750/51 codec; headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D auich0: ac97: ext id 0x601<AC97_22,AMAP,VRA> vendor 0x8086 product 0x24c6 (modem communications, revision 0x03) at pci0 dev 31 function 6 not configured isa0 at ichlpcib0 acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: HLT, lat 1 us, pow 1000 mW acpicpu0: C2: I/O, lat 1 us, pow 500 mW acpicpu0: C3: I/O, lat 185 us, pow 100 mW acpicpu0: P0: FFH, lat 10 us, pow 5000 mW, 1100 MHz acpicpu0: P1: FFH, lat 10 us, pow 4600 mW, 1000 MHz acpicpu0: P2: FFH, lat 10 us, pow 4200 mW, 900 MHz acpicpu0: P3: FFH, lat 10 us, pow 3800 mW, 800 MHz acpicpu0: P4: FFH, lat 10 us, pow 3000 mW, 600 MHz acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 auich0: measured ac97 link rate at 47996 Hz, will use 48000 Hz audio0 at auich0: full duplex, playback, capture, mmap, independent uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered acpiacad0: AC adapter online. umass0 at uhub1 port 1 configuration 1 interface 0 umass0: SanDisk Extreme, rev 2.10/0.10, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: <SanDisk, Extreme, 0001> disk fixed sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Logical Unit Is in Process Of Becoming Ready sd0: drive offline sd0: fabricating a geometry Kernelized RAIDframe activated boot device: sd0 root on sd0a dumps on sd0b root file system type: ffs WARNING: clock gained 61 days acpibat0: normal capacity on 'charge state' -- You are receiving this mail because: You are the assignee for the bug.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-195516-8>