Date: Sat, 15 Oct 2016 22:52:29 -0700 From: Gordon Zaft <gordonzaft@gmail.com> To: freebsd-sparc64@freebsd.org Subject: 11.0 hangs on boot after install - Sun Fire V245 Message-ID: <CAGuhNT3TL-KePqwHUjoy2FsV1qDzX=S3TGxrJ0uxxTZ4cqed9w@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
I just installed 11.0--p1 Release on a Sun Fire V245. The install went okay but then when I booted after install it hangs at: (da0:mpt0:0:0:0): UNMAPPED da0 at mpt0 bus 0 scbus2 target 0 lun 0 da0: <HITACHI H101414SCSUN146G SA23> Fixed Direct Access SPC-3 SCSI device da0: Serial Number 000815EXH39A P4VXH39A da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 140009MB (286739329 512 byte sectors) SMP: AP CPU #1 Launched! cd0 at ata2 bus 0 scbus0 target 0 lun 0 cd0: <TSSTcorp CD/DVDW TS-T632A SR03> Removable CD-ROM SCSI device cd0: 33.300MB/s transfersTrying to mount root from ufs:/dev/da0a [rw]... (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray open uhub2: 8 ports with 8 removable, self powered ugen1.2: <vendor 0x03eb> at usbus1 uhub3: <Standard USB Hub> on usbus1 uhub3: 4 ports with 4 removable, self powered I found this discussion: https://lists.freebsd.org/pipermail/freebsd-sparc64/2016-September/009916.html I tried doing a hard power-off and booting the machine from a cold start but it did not help. Any suggestions? Right now all I can think of to do is to try to build a custom kernel on another machine with the ehci line commented out. My only other sparc64 machine is a U5 with insufficient disk space to build a full-on release though. Would I be better off trying to install 10.3 and then do an upgrade with a custom kernel? This is a nice machine and I would like to run 11.0 on it. G -- Gordon Zaft Province 35 Governor Phi Mu Alpha Sinfonia Fraternity gordonzaft@gmail.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGuhNT3TL-KePqwHUjoy2FsV1qDzX=S3TGxrJ0uxxTZ4cqed9w>