Date: Sun, 13 May 2018 20:00:21 +0200 From: Dirk-Willem van Gulik <dirkx@webweaving.org> To: freebsd-scsi@freebsd.org Subject: Scalar i40 tapechanger LUN appearing as a second tape drive Message-ID: <47CCCC93-7168-47B8-8C80-248C90F8085C@webweaving.org>
next in thread | raw e-mail | index | archive | help
While having to re-surrect a Quantum Scalar i40 LTO5 unit - on a stock = 11.1-RELEASE-p6 wired up with a external SAS cable to a HP Smart Array = P222 I am seeing: camcontrol devlist=20 ... <HP Ultrium 5-SCSI Z6KZ> at scbus3 target 4 lun 0 = (sa0,pass1) <HP Ultrium 5-SCSI Z6KZ> at scbus3 target 4 lun 1 = (pass2,sa1) ....=09 rather than the tape drive on LUN 0 and the tape changer on LUN 1 (the = control path is to this drive - the serial number matches - and in like = with the web interface details).=20 dmesg shows: ... sa0 at ciss1 bus 32 scbus3 target 4 lun 0=20 sa0: Serial Number C38CEFF000 ... sa1 at ciss1 bus 32 scbus3 target 4 lun 1 ... sa1: Serial Number C38CEFF000 The second drive (Serial C38CEFF004) is not wired up. Or if it is - it = nicely shows up at the right (different) target and LUN0, without a = second LUN. Does this ring a bell with any one ? The kernel has ch(4), sa(4) and = pass(4) compiled in statically (and is known to work with other tape = changers/libraries). Any hints appreciated, Dw.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47CCCC93-7168-47B8-8C80-248C90F8085C>