Date: Sun, 13 Aug 2006 22:08:45 -0700 From: "Matthew Jacob" <lydianconcepts@gmail.com> To: "Kevin Day" <toasty@dragondata.com> Cc: freebsd-scsi@freebsd.org Subject: Re: mpt0: reply length does not match message length: got 0x38, expected 0x3c Message-ID: <7579f7fb0608132208y74cedb7evc5c011a13de2120b@mail.gmail.com> In-Reply-To: <F7A59C7F-0974-4658-B776-CE38698EF0F6@dragondata.com> References: <F7A59C7F-0974-4658-B776-CE38698EF0F6@dragondata.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This only happens on the GET IOC FACTS command. The reply for this has changed over the years. Newer structures have more data. Older f/w has less data. You're right that it's harmless. On 8/12/06, Kevin Day <toasty@dragondata.com> wrote: > > I've got a dual LSI 929 Fibrechannel adapter running in 6.1 pretty > successfully. However, I'm seeing some messages on boot that I can't > explain, and google doesn't seem to think anyone else has seen this > either. > > mpt0: <LSILogic FC929 FC Adapter> port 0xde00-0xdeff mem > 0xfcfc0000-0xfcfcffff,0xfcfb0000-0xfcfbffff irq 27 at device 2.0 on pci3 > mpt0: [GIANT-LOCKED] > mpt0: reply length does not match message length: got 0x38, expected > 0x3c > mpt0: MPI Version=1.1.0.0 > mpt0: Unhandled Event Notify Frame. Event 0xa. > mpt0: Capabilities: ( RAID-1 ) > mpt0: 0 Active Volumes (1 Max) > mpt0: 0 Hidden Drive Members (0 Max) > mpt0: mpt_read_cfg_header: Config Info Status 22 > mpt1: <LSILogic FC929 FC Adapter> port 0xdf00-0xdfff mem > 0xfcfe0000-0xfcfeffff,0xfcfd0000-0xfcfdffff irq 26 at device 2.1 on pci3 > mpt1: [GIANT-LOCKED] > mpt1: reply length does not match message length: got 0x38, expected > 0x3c > mpt1: MPI Version=1.1.0.0 > mpt1: Unhandled Event Notify Frame. Event 0xa. > mpt1: Capabilities: ( RAID-1 ) > mpt1: 0 Active Volumes (1 Max) > mpt1: 0 Hidden Drive Members (0 Max) > mpt1: mpt_read_cfg_header: Config Info Status 22 > > Anyone more familiar with the mpt driver know if that "reply length" > or "Unhandled Event" message is harmless or not? > > > It otherwise seems to work: > > da1 at mpt1 bus 0 target 0 lun 0 > da1: <APPLE Xserve RAID 1.50> Fixed Direct Access SCSI-5 device > da1: 100.000MB/s transfers, Tagged Queueing Enabled > da1: 1060176MB (2171240448 512 byte sectors: 255H 63S/T 135153C) > da0 at mpt0 bus 0 target 0 lun 0 > da0: <APPLE Xserve RAID 1.50> Fixed Direct Access SCSI-5 device > da0: 100.000MB/s transfers, Tagged Queueing Enabled > da0: 1060176MB (2171240448 512 byte sectors: 255H 63S/T 135153C) > > # dd if=/dev/zero of=test bs=128k count=10000 > 10000+0 records in > 10000+0 records out > 1310720000 bytes transferred in 10.582999 secs (123851472 bytes/sec) > > > > _______________________________________________ > freebsd-scsi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7579f7fb0608132208y74cedb7evc5c011a13de2120b>