Date: Thu, 10 Nov 2005 11:45:08 -0000 From: "Filip Wuytack" <fwuytack@fgscapital.com> To: <freebsd-stable@freebsd.org> Subject: Adaptec SATA 1210SA+ Freebsd 6.0 Message-ID: <20051110114512.8652A43D4C@mx1.FreeBSD.org>
next in thread | raw e-mail | index | archive | help
Hi,
I just installed freebsd 6 and it all runs fine, but when I try (via
sysinstall) to make a new label on a partition on ar0, the system says:
'ata2 disconnect requested' and freezes. I there something extra I need to
do make ar0 to work properly?
Many thanks,
Filip
This is the output of my dmesg.boot:
=============================================
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005
root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <DELL PE500SC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III CPU family 1133MHz (1130.45-MHz 686-class
CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1207894016 (1151 MB)
avail memory = 1173618688 (1119 MB)
ioapic0: Changing APIC ID to 1
ioapic1: Changing APIC ID to 2
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE500SC> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> on acpi0
pci_link1: <ACPI PCI Link LNKB> on acpi0
pci_link2: <ACPI PCI Link LNKC> on acpi0
pci_link3: <ACPI PCI Link LNKD> on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LNKF> on acpi0
pci_link6: <ACPI PCI Link LNKG> on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 10 on acpi0
pci_link8: <ACPI PCI Link LNKI> on acpi0
pci_link9: <ACPI PCI Link LNKJ> on acpi0
pci_link10: <ACPI PCI Link LNKK> on acpi0
pci_link11: <ACPI PCI Link LNKL> on acpi0
pci_link12: <ACPI PCI Link LNKM> on acpi0
pci_link13: <ACPI PCI Link LNKN> on acpi0
pci_link14: <ACPI PCI Link LNKO> irq 5 on acpi0
pci_link15: <ACPI PCI Link LNKP> on acpi0
pci_link16: <ACPI PCI Link LUSB> irq 3 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xecc0-0xecff mem
0xfe102000-0xfe102fff,0xfe000000-0xfe0fffff irq 20 at device 2.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:c0:9f:0a:3d:56
atapci0: <SiI 3112 SATA150 controller> port
0xecb8-0xecbf,0xecb0-0xecb3,0xeca0-0xeca7,0xec98-0xec9b,0xec80-0xec8f mem
0xfe103000-0xfe1031ff irq 23 at device 6.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
amr0: <LSILogic MegaRAID 1.51> mem 0xfb000000-0xfb00ffff irq 30 at device
10.0 on pci0
amr0: <LSILogic CERC ATA100/4ch> Firmware H661, BIOS 1.01, 16MB RAM
pci0: <display, VGA> at device 11.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <ServerWorks CSB5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8b0-0x8bf,0x8c0-0x8c3 at device 15.1
on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff irq 3 at
device 15.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 1
on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcbfff,0xec000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1130453349 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <SAMSUNG CD-ROM SC-148C/B100> at ata1-master UDMA33
ad4: 381554MB <Seagate ST3400832AS 3.02> at ata2-master SATA150
ad6: 381554MB <Seagate ST3400832AS 3.02> at ata3-master SATA150
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 38138MB (78106624 sectors) RAID 1 (optimal)
ar0: 381554MB <Adaptec HostRAID RAID1> status: READY
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (mirror) using ad6 at ata3-master
Trying to mount root from ufs:/dev/amrd0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051110114512.8652A43D4C>