Date: Fri, 25 Nov 2005 17:34:06 +0100 From: Peter Pentchev <roam@ringlet.net> To: freebsd-mobile@FreeBSD.org Subject: nVidia Go 6600 reboot (kernel panic?) Message-ID: <20051125163406.GA2471@straylight.m.ringlet.net>
next in thread | raw e-mail | index | archive | help
--9jxsPFA5p3P2qPhR Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi, I've got a nVidia GeForce Go 6600 on a Centrino chipset - and a weird problem with it, too. The X.org default driver does not recognize the chipset and only gives me 640x480x24bit, which is... weird :) With ports/x11/nvidia-driver I get the "real" resolutions, and along with them a 100% reproducible reboot when I switch to a text console and then back to X. This smells of a kernel panic, but it does not drop me into ddb (understandable), does not leave a crash dump or anything... Here's what pciconf -lv says: hostb0@pci0:0:0: class=3D0x060000 card=3D0x404717c0 chip=3D0x25908086 rev= =3D0x04 hdr=3D0x00 vendor =3D 'Intel Corporation' device =3D '82915PM/GM/GMS, 82910GML Host Bridge' class =3D bridge subclass =3D HOST-PCI pcib1@pci0:1:0: class=3D0x060400 card=3D0x00000088 chip=3D0x25918086 rev=3D= 0x04 hdr=3D0x01 vendor =3D 'Intel Corporation' device =3D '82915PM/GM PCI Express Graphics Port' class =3D bridge subclass =3D PCI-PCI pcib2@pci0:28:0: class=3D0x060400 card=3D0x00000040 chip=3D0x26608086 rev= =3D0x04 hdr=3D0x01 vendor =3D 'Intel Corporation' device =3D '82801FB/FR/FW/FRW PCI Express Port 1' class =3D bridge subclass =3D PCI-PCI uhci0@pci0:29:0: class=3D0x0c0300 card=3D0x10a517c0 chip=3D0x26588086 rev= =3D0x04 hdr=3D0x00 vendor =3D 'Intel Corporation' device =3D '82801FB/FR/FW/FRW USB UHCI Controller' class =3D serial bus subclass =3D USB uhci1@pci0:29:1: class=3D0x0c0300 card=3D0x10a517c0 chip=3D0x26598086 rev= =3D0x04 hdr=3D0x00 vendor =3D 'Intel Corporation' device =3D '82801FB/FR/FW/FRW USB UHCI Controller' class =3D serial bus subclass =3D USB uhci2@pci0:29:2: class=3D0x0c0300 card=3D0x10a517c0 chip=3D0x265a8086 rev= =3D0x04 hdr=3D0x00 vendor =3D 'Intel Corporation' device =3D '82801FB/FR/FW/FRW USB UHCI Controller' class =3D serial bus subclass =3D USB uhci3@pci0:29:3: class=3D0x0c0300 card=3D0x10a517c0 chip=3D0x265b8086 rev= =3D0x04 hdr=3D0x00 vendor =3D 'Intel Corporation' device =3D '82801FB/FR/FW/FRW USB UHCI Controller' class =3D serial bus subclass =3D USB ehci0@pci0:29:7: class=3D0x0c0320 card=3D0x10a617c0 chip=3D0x265c8086 rev= =3D0x04 hdr=3D0x00 vendor =3D 'Intel Corporation' device =3D '82801FB/FR/FW/FRW USB 2.0 EHCI Controller' class =3D serial bus subclass =3D USB pcib3@pci0:30:0: class=3D0x060401 card=3D0x00000050 chip=3D0x24488086 rev= =3D0xd4 hdr=3D0x01 vendor =3D 'Intel Corporation' device =3D '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Br= idge' class =3D bridge subclass =3D PCI-PCI pcm0@pci0:30:2: class=3D0x040100 card=3D0x201617c0 chip=3D0x266e8086 rev=3D= 0x04 hdr=3D0x00 vendor =3D 'Intel Corporation' device =3D '82801FB/FR/FW/FRW AC '97 Audio Controller' class =3D multimedia subclass =3D audio none0@pci0:30:3: class=3D0x070300 card=3D0x10ab17c0 chip=3D0x266d8086 rev= =3D0x04 hdr=3D0x00 vendor =3D 'Intel Corporation' device =3D '82801FB/FR/FW/FRW AC '97 Modem Controller' class =3D simple comms subclass =3D generic modem isab0@pci0:31:0: class=3D0x060100 card=3D0x404517c0 chip=3D0x26418086 rev= =3D0x04 hdr=3D0x00 vendor =3D 'Intel Corporation' device =3D '82801FBM ICH6M LPC Interface Bridge' class =3D bridge subclass =3D PCI-ISA atapci0@pci0:31:2: class=3D0x010180 card=3D0x404217c0 chip=3D0x26538086 rev= =3D0x04 hdr=3D0x00 vendor =3D 'Intel Corporation' device =3D '82801FBM ICH6M SATA Controller' class =3D mass storage subclass =3D ATA none1@pci0:31:3: class=3D0x0c0500 card=3D0x404117c0 chip=3D0x266a8086 rev= =3D0x04 hdr=3D0x00 vendor =3D 'Intel Corporation' device =3D '82801FB/FR/FW/FRW SMBus Controller' class =3D serial bus subclass =3D SMBus none2@pci1:0:0: class=3D0x030000 card=3D0x207317c0 chip=3D0x014810de rev=3D= 0xa2 hdr=3D0x00 vendor =3D 'NVIDIA Corporation' class =3D display subclass =3D VGA iwi0@pci6:5:0: class=3D0x028000 card=3D0x10018086 chip=3D0x42238086 rev=3D0= x05 hdr=3D0x00 vendor =3D 'Intel Corporation' device =3D 'PRO/Wireless 2915ABG MiniPCI Adapter' class =3D network re0@pci6:7:0: class=3D0x020000 card=3D0x109417c0 chip=3D0x816910ec rev=3D0x= 10 hdr=3D0x00 vendor =3D 'Realtek Semiconductor' device =3D 'RTL8169 Gigabit Ethernet Adapter' class =3D network subclass =3D ethernet none3@pci6:9:0: class=3D0x060700 card=3D0x300717c0 chip=3D0x8031104c rev=3D= 0x00 hdr=3D0x02 vendor =3D 'Texas Instruments (TI)' class =3D bridge subclass =3D PCI-CardBus none4@pci6:9:2: class=3D0x0c0010 card=3D0x300717c0 chip=3D0x8032104c rev=3D= 0x00 hdr=3D0x00 vendor =3D 'Texas Instruments (TI)' class =3D serial bus subclass =3D FireWire none5@pci6:9:3: class=3D0x018000 card=3D0x300717c0 chip=3D0x8033104c rev=3D= 0x00 hdr=3D0x00 vendor =3D 'Texas Instruments (TI)' device =3D 'PCIxx21 Integrated FlashMedia Controller' class =3D mass storage none6@pci6:9:4: class=3D0x080500 card=3D0x300717c0 chip=3D0x8034104c rev=3D= 0x00 hdr=3D0x00 vendor =3D 'Texas Instruments (TI)' class =3D base peripheral And here's dmesg -a: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-STABLE #0: Wed Nov 16 15:42:49 EET 2005 roam@straylight.m.ringlet.net:/fs/5/usr.obj/fs/5/usr.src/sys/STRAYLIGHT WARNING: WITNESS option enabled, expect reduced performance. WARNING: DIAGNOSTIC option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.06-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x6d8 Stepping =3D 8 Features=3D0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> real memory =3D 1072562176 (1022 MB) avail memory =3D 1040035840 (991 MB) npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD Wistron> on motherboard acpi0: Power Button (fixed) acpi_ec0: <Embedded Controller: GPE 0x17> port 0x66,0x62 on acpi0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU (4 Cx states)> on acpi0 acpi_perf0: <ACPI CPU Frequency Control> on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_perf0: <ACPI CPU Frequency Control> on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 10 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 11 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci0: <serial bus, USB> at device 29.0 (no driver attached) pci0: <serial bus, USB> at device 29.1 (no driver attached) pci0: <serial bus, USB> at device 29.2 (no driver attached) pci0: <serial bus, USB> at device 29.3 (no driver attached) pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 ACPI link \\_SB_.PCI0.LPCB.LNKG has invalid initial irq 10, ignoring pci6: <ACPI PCI bus> on pcib3 pci6: <network> at device 5.0 (no driver attached) re0: <RealTek 8169SB Single-chip Gigabit Ethernet> port 0x3000-0x30ff mem 0= xb0007000-0xb00070ff irq 10 at device 7.0 on pci6 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S media interface> on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000b= aseTX-FDX, auto re0: Ethernet address: 00:0a:e4:ab:65:9c pci6: <bridge, PCI-CardBus> at device 9.0 (no driver attached) pci6: <serial bus, FireWire> at device 9.2 (no driver attached) pci6: <mass storage> at device 9.3 (no driver attached) pci6: <base peripheral> at device 9.4 (no driver attached) pcm0: <Intel ICH6 (82801FB)> port 0x1880-0x18bf,0x1c00-0x1cff mem 0x8000040= 0-0x800004ff,0x80000800-0x800009ff irq 10 at device 30.2 on pci0 pcm0: <Avance Logic ALC655 AC97 Codec> pci0: <simple comms, generic modem> at device 30.3 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH6 SATA150 controller> port 0x18e0-0x18ef,0x376,0x170-0x1= 77,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 orm0: <ISA Option ROM> at iomem 0xd8000-0xdbfff on isa0 pmtimer0 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled Timecounter "TSC" frequency 1729056654 Hz quality 800 Timecounters tick every 10.000 msec Expensive timeout(9) function: 0xc050c9e0(0) 0.003387860 s ad0: 76319MB <HTS541080G9SA00/MB4OC60D> [155061/16/63] at ata0-master SATA1= 50 ata1-slave: FAILURE - ATAPI_IDENTIFY timed out ata1-slave: FAILURE - ATAPI_IDENTIFY timed out ata1-slave: FAILURE - ATAPI_IDENTIFY timed out acd0: DVDR <AOPEN DVD RW ISU8424E/1.10> at ata1-master PIO4 pass0 at ata1 bus 0 target 0 lun 0 pass0: <AOPEN DVD RW ISU8424E 1.10> Removable CD-ROM SCSI-0 device=20 pass0: 16.000MB/s transfers Mounting root from ufs:/dev/ad0s1a Pre-seeding PRNG: kickstart =2E Loading configuration files. Entropy harvesting: interrupts ethernet point_to_point kickstart =2E kernel dumps on /dev/ad0s2b swapon: adding /dev/ad0s2b as swap device Starting file system checks: /dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1a: clean, 157256 free (1272 frags, 19498 blocks, 0.5% fragmentati= on) /dev/ad0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s2a: clean, 2164604 free (62524 frags, 262760 blocks, 0.5% fragment= ation) /dev/ad0s2d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s2d: clean, 186472 free (816 frags, 23207 blocks, 0.3% fragmentatio= n) /dev/ad0s2g: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s2g: clean, 77319 free (1391 frags, 9491 blocks, 0.3% fragmentation) /dev/ad0s2e: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s2e: clean, 62199 free (175 frags, 7753 blocks, 0.1% fragmentation) /dev/ad0s2h: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s2h: clean, 30632 free (3760 frags, 3359 blocks, 0.7% fragmentation) /dev/ad0s2f: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s2f: clean, 154323 free (1515 frags, 19101 blocks, 0.6% fragmentati= on) net.inet6.ip6.auto_linklocal:=20 1 ->=20 0 net.inet6.ip6.v6only:=20 1 ->=20 0 Setting hostname: straylight.m.ringlet.net. lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000=20 inet6 ::1 prefixlen 128=20 inet 127.0.0.2 netmask 0xffffffff=20 inet 192.168.1.13 netmask 0xffffff00=20 Starting dhclient. Expensive timeout(9) function: 0xc05e8da0(0) 0.003527822 s Expensive timeout(9) function: 0xc047a800(0xc235a000) 0.003799085 s Script /etc/rc.d/dhclient interrupted Additional routing options: IP gateway=3DYES =2E Starting devd. hw.acpi.cpu.cx_lowest:=20 C1 ->=20 C1 dev.cpu.0.freq:=20 1734 ->=20 1734 Mounting NFS file systems: =2E Starting syslogd. Checking for core dump on /dev/ad0s2b... savecore: no dumps found Starting rpcbind. NFS access cache time=3D2 ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/= lib a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout Starting mountd. Starting nfsd. Starting statd. Starting lockd. Starting usbd. uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1800-0x= 181f irq 11 at device 29.0 on pci0 uhci0: LegSup =3D 0x1f30 usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 usb0: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1820-0x= 183f irq 11 at device 29.1 on pci0 uhci1: LegSup =3D 0x0f10 usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 usb1: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1840-0x= 185f irq 11 at device 29.2 on pci0 uhci2: LegSup =3D 0x0f10 usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 usb2: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1860-0x= 187f irq 11 at device 29.3 on pci0 uhci3: LegSup =3D 0x0f10 usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 usb3: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0x80000000-0x800003ff irq 11= at device 29.7 on pci0 usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <EHCI (generic) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered Starting local daemons: =2E Starting ntpd. Configuring syscons: keymap keyrate alt_is_meta font8x16 font8x14 font8x8 blanktime screensaver =2E Starting sshd. Initial i386 initialization: =2E Additional ABI support: linux /compat/linux/sbin/ldconfig:=20 Can't remove old temporary cache file /etc/ld.so.cache~ : Read-only file system =2E Starting cron. Local package initialization: Starting svscan. =20 tomcat41 Starting apache. (skipping dictd.sh, not executable) Setting the mixer cd from 100:100 to 100:100. Setting the mixer pcm from 100:100 to 100:100. Setting the mixer vol from 100:100 to 100:100. Setting the mixer speaker from 0:0 to 0:0. Starting mysql. Starting SAMBA: removing stale tdbs : Starting nmbd. Starting smbd. Starting stunnel. =2E Additional TCP options: =2E Starting moused: mousechar_start Expensive timeout(9) function: 0xc06045e0(0xc06e6a20) 0.010120637 s =2E Starting inetd. Starting background file system checks in 60 seconds. Fri Nov 25 14:35:46 CET 2005 G'luck, Peter --=20 Peter Pentchev roam@ringlet.net roam@cnsys.bg roam@FreeBSD.org PGP key: http://people.FreeBSD.org/~roam/roam.key.asc Key fingerprint FDBA FD79 C26F 3C51 C95E DF9E ED18 B68D 1619 4553 No language can express every thought unambiguously, least of all this one. --9jxsPFA5p3P2qPhR Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (FreeBSD) iD8DBQFDhzz+7Ri2jRYZRVMRAolhAJwIpsUXw8monRaCBWOc9jrCqIrdkACgghiz ujZKG4alTW6/R6AkYEhI3ZM= =iYrv -----END PGP SIGNATURE----- --9jxsPFA5p3P2qPhR--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051125163406.GA2471>