Date: Fri, 3 Jan 2003 15:50:52 -0800 (PST) From: jay <jay@musubi.org> To: freebsd-questions@freebsd.org Subject: 4.7 release with shuttle s40g xpc Message-ID: <20030103151924.L23292-100000@spam.musubi.org>
next in thread | raw e-mail | index | archive | help
hello,
does anyone have freebsd working with a shuttle s40g xpc?
at random times, under heavy disk access, i will get either a bus error or
kernel panic and the machine will restart itself.
errors i've seen are things like:
panicstr: softdep_lock: locking against myself
vm_page_unwire: invalid wire count: 0
bus error
i also have a promise fasttrack 100 tx2 IDE RAID card installed in the
box, but as far as i can tell it seems to be recognized and working well.
i have yet to pull that out and test it with a HD plugged into the
motherboard's IDE connectors, but i was wondering if anyone else was
using the ss40g without problems.
the ss40g uses a shuttle spacewalker fs40 amd motherboard w/ a sis 740/961
chipset. cpu is an athlon 2100+ xp. 512mb ddr2100 ram. promise fasttrack
100 tx2 IDE RAID controller. two 40gb seagate barracuda IV HDs. one aopen
dvd-rom (dvd-1640 pro 0122).
dmesg output:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002
root@builder.freebsdmall.com:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) XP 1500+ (1311.68-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 503316480 (491520K bytes)
avail memory = 484462592 (473108K bytes)
Preloaded elf kernel "kernel" at 0xc050f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00fde70
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <SiS model 6325 VGA-compatible display device> at 0.0
isab0: <SiS 85c503 PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xed110000-0xed110fff irq 11 at
device 2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xed111000-0xed111fff irq 9 at device 2.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 5591 ATA100 controller> port 0x4000-0x400f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x13f6, dev=0x0111) at 10.0 irq 5
atapci1: <Promise TX2 ATA100 controller> port 0xe400-0xe40f,0xe000-0xe003,0xdc00-0xdc07,0xd800-0xd803,0xd400-0xd407 mem 0xed1
00000-0xed10ffff irq 11 at device 12.0 on pci0
ata2: at 0xd400 on atapci1
ata3: at 0xdc00 on atapci1
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xed112000-0xed1120ff irq 10 at device 15.0 on pci0
rl0: Ethernet address: 00:30:1b:11:21:bd
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x11c1, dev=0x5811) at 16.0 irq 11
pcib1: <SiS 5591 host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem
0xc0000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd87ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ar0: 38166MB <ATA RAID1 array> [4865/255/63] status: READY subdisks:
0 READY ad4: 38166MB <ST340016A> [77545/16/63] at ata2-master UDMA100
1 READY ad6: 38166MB <ST340016A> [77545/16/63] at ata3-master UDMA100
acd0: DVD-ROM <AOpen Inc. DVD-ROM DVD-1640 PRO 0122> at ata0-master PIO4
=jay
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030103151924.L23292-100000>