Date: Sun, 20 Sep 1998 13:01:30 -0700 From: almazs@wgn.net To: freebsd-questions@FreeBSD.ORG Subject: Re: about ppp link to internet!! Message-ID: <36055F1A.779B@wgn.net> References: <01bdcf07$4717ba60$80d972cf@thor>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi everybody; I have set up my ppp config files as in the FreeBSD docs and my cofigurations are simiar to what was suggested and there seems to be a problem when I try 'ondemand' or 'pmdemand'. I am trying to connect on a dynamic IP assignment to MY ISP and I am running FreeBSD 2.2.6 My modem is a USR sportster 14.4 faxmodem external DTR normal verbal result codes display result codes echo offline commands supress auto answer carrier detect normal load NVRAM defaults smart mode I am able to connect using ppp terminal mode after typing my login and password I get the prompt: Entering PPP Mode IP address is ***.***.***.*** MTU IS 1500 I logged-in on a second virtual terminal and executed a ports collection fetch for netscape4-navigator. It failed to get it from ftp.netscape.com/pub/communicator/4.04/development/english ... it tryed the ftp://ftp.freebsd.org/pub/FreeBSD/distfiles ... it "dowloaded" only 5% in 15 mins and hungup!! My kernel is setup for: pseudo-device tun 2 (for a max of two ppp sessions) 'ifconfig -a' shows: tun0: flags=8010<POINTTOPOINT,MULTICAST> mtu 1500 tun1: flags=8010<POINTTOPOINT,MULTICAST> mtu 1500 etc/host.conf looks like: #...... bind hosts etc/hosts looks like: #...... 127.0.0.1 localhost 10.0.0.1 almazs.wgn.net almazs #...... resolv.conf looks like: nameserver 207.213.0.5 #primary dns for my ISP nameserver 207.213.0.6 #secondary dns for my ISP domain wgn.net ppp.conf looks like: #...... default: set log Phase Chat Connect Carrier LCP IPCP CCP tun command set device /dev/cuaa1 #my modem device on com2 set speed 19200 deny lqr set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT" #....... pmdemand: set phone 8730055 set login "TIMEOUT 10 ogin:--ogin: almazs ppp word: ****** ppp" set timeout 120 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 delete ALL add 0 0 HISADDR enable dns #....... PAPorCHAPpmdemand: set phone 8730055 set login set authname almazs set authkey ****** set timeout 120 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 delete ALL add 0 0 HISADDR #...... ondemand: set phone 8730055 set login "TIMEOUT 5 ogin:--ogin: almazs ppp word: ****** ppp" set timeout 120 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 delete ALL add 0 0 HISADDR #..... ppp.linkup looks like: #...... MYADDR: delete 0 add 0 0 HISADDR #..... pmdemand: delete ALL add default HISADDR !bg /etc/ppp/ppp.etherup.pmdemand !bg sendmail -bd -q30m #.... rc.conf looks like: hostname="almazs.wgn.net" network_interfaces="io0 tun0 tun1" ifconfig_lo0="inet 127.0.0.1" ifconfig_tun0="" ifconfig_tun1="" defaultrouter="207.213.4.1" #My ISP's gateway static_routes="" gateway_enable="YES" router_enable="NO" router="NO" When I use ppp -auto pmdemand I get Working in auto mode using interface: tun0 almazs# at this point 'ifconfig tun0' shows: tun0: flags=8051<UP,POINTTOPOINT,RUNNING,MULTICAST> mtu 1500 inet 10.0.0.1 --> 10.0.0.2 netmask 0xfffff00 but none of my applications can successfuly exeute ftp to fetch a file or anything from the net. when I use 'ppp ondemand' the modem dials but fails to login i.e 'warning: DialModem: login failed' How do I get ppp to cooperate with me and connect on 'pmdemand' or 'ondemand'? What is the best way to test if it is really working OK? This particular problem has taken so much of my time it is not funny!! Thanks Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?36055F1A.779B>