Date: Fri, 11 Jan 2008 13:05:11 -0500 From: "Scott Ullrich" <sullrich@gmail.com> To: "Alexandre Biancalana" <biancalana@gmail.com> Cc: freebsd-pf@freebsd.org Subject: Re: carpdev ... Message-ID: <d5992baf0801111005s43a76cfem430644928c897e3e@mail.gmail.com> In-Reply-To: <8e10486b0801110949u1593e427wc24493b98d0003d2@mail.gmail.com> References: <200710272311.09059.max@love2party.net> <200712091835.33608.max@love2party.net> <8e10486b0801090741k605d7183gfb8bbdfa55fce331@mail.gmail.com> <200801110408.22724.max@love2party.net> <8e10486b0801102018h4f417a4ex900bdaeb078bd29e@mail.gmail.com> <fee88ee40801110132n77b46018i5f44da40e16a33d6@mail.gmail.com> <8e10486b0801110252w452f3e4asf438beb6297eb1f@mail.gmail.com> <d5992baf0801110844o22ba2d3ds8db2a31881df1e6e@mail.gmail.com> <8e10486b0801110949u1593e427wc24493b98d0003d2@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 1/11/08, Alexandre Biancalana <biancalana@gmail.com> wrote: > > FW1:/usr/home/ale $ ifconfig pfsync0 > pfsync0: flags=41<UP,RUNNING> metric 0 mtu 1460 > pfsync: syncdev: interconnect syncpeer: 224.0.0.240 maxupd: 128 > > FW1:/usr/home/ale $ ifconfig interconnect > interconnect: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> > metric 0 mtu 1500 > options=8<VLAN_MTU> > ether 00:16:76:24:23:25 > inet 10.0.0.1 netmask 0xfffffffc broadcast 10.0.0.3 > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > > > > FW2:/root # ifconfig pfsync0 > pfsync0: flags=41<UP,RUNNING> metric 0 mtu 1460 > pfsync: syncdev: interconnect syncpeer: 224.0.0.240 maxupd: 128 > FW2:/root # ifconfig interconnect > interconnect: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> > metric 0 mtu 1500 > > options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> > ether 00:13:20:c4:7f:ca > inet 10.0.0.2 netmask 0xfffffffc broadcast 10.0.0.3 > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > Thank you. Do you see the states on the backup machine when it is in the backup status mode? pfctl -ss You should see a similar output on the backup machine as the primary. BTW: I did not know about ifconfig interconnect... Cool stuff!! Scott
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?d5992baf0801111005s43a76cfem430644928c897e3e>