Date: Fri, 19 Jun 2009 09:30:17 +0000 From: agh@coolrhaug.com To: usb@freebsd.org Subject: Ikari laser mouse stopped working from r193084 to r194478 Message-ID: <20090619093017.23556vdb72x3mbk0@mail.coolrhaug.com>
next in thread | raw e-mail | index | archive | help
[Please CC when replying] Hello, Last year I bought a new laser mouse (See =20 http://lists.freebsd.org/pipermail/freebsd-stable/2008-December/047160.html)= . =20 It failed to work in -STABLE so I updated to -CURRENT, it still didn't =20 function. However a few months later I noticed after an update that it =20 started working. I've been following -CURRENT since then, but =20 recently, after svn'ing from r193084 to r194478 my mouse no longer =20 works. Following is the dmesg: Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 =09The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0 r194478: Fri Jun 19 17:01:31 WST 2009 agh@madcat:/usr/obj/usr/src/sys/MADCAT Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz (2999.97-MHz =20 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x1067a Stepping =3D 10 =20 Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,M= CA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> =20 Features2=3D0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR= ,PDCM,SSE4.1,XSAVE> AMD Features=3D0x20100000<NX,LM> AMD Features2=3D0x1<LAHF> TSC: P-state invariant real memory =3D 4294967296 (4096 MB) avail memory =3D 2613334016 (2492 MB) MPTable: <DP45SG INTEL> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0: Assuming intbase of 0 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem =20 0xc2000000-0xc2ffffff,0xa0000000-0xbfffffff,0xc0000000-0xc1ffffff irq =20 16 at device 0.0 on pci1 nvidia0: <GeForce 8600 GT> on vgapci0 vgapci0: child nvidia0 requested pci_enable_busmaster vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io nvidia0: [GIANT-LOCKED] nvidia0: [ITHREAD] em0: <Intel(R) PRO/1000 Network Connection 6.9.9> port 0xf100-0xf11f =20 mem 0xc3200000-0xc321ffff,0xc3224000-0xc3224fff irq 20 at device 25.0 =20 on pci0 em0: Using MSI interrupt em0: [FILTER] em0: Ethernet address: 00:1c:c0:8c:09:75 uhci0: <UHCI (generic) USB controller> port 0xf0e0-0xf0ff irq 16 at =20 device 26.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup =3D 0x0f30 usbus0: <UHCI (generic) USB controller> on uhci0 uhci1: <UHCI (generic) USB controller> port 0xf0c0-0xf0df irq 21 at =20 device 26.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup =3D 0x0f30 usbus1: <UHCI (generic) USB controller> on uhci1 uhci2: <UHCI (generic) USB controller> port 0xf0a0-0xf0bf irq 18 at =20 device 26.2 on pci0 uhci2: [ITHREAD] uhci2: LegSup =3D 0x0f30 usbus2: <UHCI (generic) USB controller> on uhci2 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc3225c00-0xc3225fff =20 irq 18 at device 26.7 on pci0 ehci0: [ITHREAD] usbus3: waiting for BIOS to give up control usbus3: EHCI version 1.0 usbus3: <EHCI (generic) USB 2.0 controller> on ehci0 hdac0: <Intel 82801J High Definition Audio Controller> mem =20 0xc3220000-0xc3223fff irq 22 at device 27.0 on pci0 hdac0: HDA Driver Revision: 20090614_0135 hdac0: [ITHREAD] uhci3: <UHCI (generic) USB controller> port 0xf080-0xf09f irq 23 at =20 device 29.0 on pci0 uhci3: [ITHREAD] uhci3: LegSup =3D 0x0f30 usbus4: <UHCI (generic) USB controller> on uhci3 uhci4: <UHCI (generic) USB controller> port 0xf060-0xf07f irq 19 at =20 device 29.1 on pci0 uhci4: [ITHREAD] uhci4: LegSup =3D 0x0f30 usbus5: <UHCI (generic) USB controller> on uhci4 uhci5: <UHCI (generic) USB controller> port 0xf040-0xf05f irq 18 at =20 device 29.2 on pci0 uhci5: [ITHREAD] uhci5: LegSup =3D 0x0f30 usbus6: <UHCI (generic) USB controller> on uhci5 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xc3225800-0xc3225bff =20 irq 23 at device 29.7 on pci0 ehci1: [ITHREAD] usbus7: waiting for BIOS to give up control usbus7: timed out waiting for BIOS usbus7: EHCI version 1.0 usbus7: <EHCI (generic) USB 2.0 controller> on ehci1 pcib2: <MPTable PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 fwohci0: <Lucent FW322/323> mem 0xc3100000-0xc3100fff irq 19 at device =20 0.0 on pci2 fwohci0: [ITHREAD] fwohci0: OHCI version 1.0 (ROM=3D0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:90:27:00:02:2b:34:b9 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:90:27:00:02:2b:34:b9 @ 0xfffe00000000, =20 S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x144c000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:90:27:2b:34:b9 fwe0: Ethernet address: 02:90:27:2b:34:b9 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=3D0x00000000, SelfID Count=3D1, =20 CYCLEMASTER mode isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH10 SATA300 controller> port =20 0xf150-0xf157,0xf140-0xf143,0xf130-0xf137,0xf120-0xf123,0xf020-0xf03f =20 mem 0xc3225000-0xc32257ff irq 19 at device 31.2 on pci0 atapci0: [ITHREAD] atapci0: AHCI called from vendor specific driver atapci0: AHCI v1.20 controller with 6 3Gbps ports, PM not supported ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: [ITHREAD] ata6: <ATA channel 4> on atapci0 ata6: [ITHREAD] ata7: <ATA channel 5> on atapci0 ata7: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) cpu0 on motherboard est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 616092106000921 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1 on motherboard est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 616092106000921 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2 on motherboard est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 616092106000921 device_attach: est2 attach returned 6 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3 on motherboard est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 616092106000921 device_attach: est3 attach returned 6 p4tcc3: <CPU Frequency Thermal Control> on cpu3 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcf800-0xd07ff pnpid =20 ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: [ITHREAD] ata1 at port 0x170-0x177,0x376 irq 15 on isa0 ata1: [ITHREAD] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0 uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 uart0: [FILTER] Timecounters tick every 1.000 msec vboxdrv: fAsync=3D0 offMin=3D0x843 offMax=3D0xa44 firewire0: 1 nodes, maxhop <=3D 0 cable IRM irm(0) (me) firewire0: bus manager 0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ad4: 476940MB <SAMSUNG HD501LJ CR100-13> at ata2-master SATA300 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen7.1: <Intel> at usbus7 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 acd0: DVDR <ASUS DRW-20B1LT/1.00> at ata3-master SATA150 GEOM: ad4s1: geometry does not match label (255h,63s !=3D 16h,63s). GEOM_JOURNAL: Journal 3711606534: ad4s1d contains data. GEOM_JOURNAL: Journal 3711606534: ad4s1e contains journal. GEOM_JOURNAL: Journal ad4s1d clean. GEOM_JOURNAL: Journal 2744463137: ad4s1f contains journal. acd1: DVDR <PLEXTOR DVDR PX-716A/1.07> at ata6-master SATA150 GEOM_JOURNAL: Journal 2744463137: ad4s1g contains data. GEOM_JOURNAL: Journal ad4s1g clean. ad14: 114473MB <Seagate ST3120026AS 3.05> at ata7-master SATA150 hdac0: HDA Codec #2: IDT 92HD73E1 pcm0: <HDA IDT 92HD73E1 PCM #0 Analog> at cad 2 nid 1 on hdac0 pcm1: <HDA IDT 92HD73E1 PCM #1 Analog> at cad 2 nid 1 on hdac0 pcm2: <HDA IDT 92HD73E1 PCM #2 Digital> at cad 2 nid 1 on hdac0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata1:0:0:0): CAM Status: SCSI Status Error (probe0:ata1:0:0:0): SCSI Status: Check Condition (probe0:ata1:0:0:0): NOT READY asc:3a,1 (probe0:ata1:0:0:0): Medium not present - tray closed (probe0:ata1:0:0:0): Unretryable error acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 cd0 at ata1 bus 0 target 0 lun 0 cd0: <ASUS DRW-20B1LT 1.00> Removable CD-ROM SCSI-0 device cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not =20 present - tray closed cd1 at ata2 bus 0 target 0 lun 0 cd1: <PLEXTOR DVDR PX-716A 1.07> Removable CD-ROM SCSI-0 device cd1: 3.300MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not =20 present - tray closed SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! GEOM: ad14s1: geometry does not match label (255h,63s !=3D 16h,63s). Root mount waiting for: usbus7 usbus3 Root mount waiting for: usbus7 usbus3 uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered Trying to mount root from ufs:/dev/label/rt_madcat ugen0.2: <DATACOMP> at usbus0 ukbd0: <DATACOMP SteelSDATA, class 0/0, rev 1.10/0.01, addr 2> on usbus0 kbd2 at ukbd0 ums0: <DATACOMP SteelSDATA, class 0/0, rev 1.10/0.01, addr 2> on usbus0 ugen2.2: <ALCOR> at usbus2 uhub8: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus2 uhub8: 4 ports with 4 removable, self powered ugen2.3: <SteelSeries ApS> at usbus2 ukbd1: <SteelSeries ApS Ikari Laser, class 0/0, rev 2.00/1.00, addr 3> =20 on usbus2 kbd3 at ukbd1 em0: link state changed to UP And here are some usbconfig dumps: # usbconfig -u 0 -a 2 dump_device_desc ugen0.2: <SteelSDATA DATACOMP> at usbus0, cfg=3D0 md=3DHOST spd=3DLOW =20 (1.5Mbps) pwr=3DON bLength =3D 0x0012 bDescriptorType =3D 0x0001 bcdUSB =3D 0x0110 bDeviceClass =3D 0x0000 bDeviceSubClass =3D 0x0000 bDeviceProtocol =3D 0x0000 bMaxPacketSize0 =3D 0x0008 idVendor =3D 0x04b4 idProduct =3D 0x0101 bcdDevice =3D 0x0001 iManufacturer =3D 0x0001 <DATACOMP> iProduct =3D 0x0002 <SteelSDATA> iSerialNumber =3D 0x0000 <no string> bNumConfigurations =3D 0x0001 # usbconfig -u 2 -a 2 dump_device_desc ugen2.2: <Generic USB Hub ALCOR> at usbus2, cfg=3D0 md=3DHOST spd=3DFULL =20 (12Mbps) pwr=3DSAVE bLength =3D 0x0012 bDescriptorType =3D 0x0001 bcdUSB =3D 0x0110 bDeviceClass =3D 0x0009 bDeviceSubClass =3D 0x0000 bDeviceProtocol =3D 0x0000 bMaxPacketSize0 =3D 0x0008 idVendor =3D 0x058f idProduct =3D 0x9254 bcdDevice =3D 0x0312 iManufacturer =3D 0x0001 <ALCOR> iProduct =3D 0x0002 <Generic USB Hub> iSerialNumber =3D 0x0000 <no string> bNumConfigurations =3D 0x0001 # usbconfig -u 2 -a 3 dump_device_desc ugen2.3: <Ikari Laser SteelSeries ApS> at usbus2, cfg=3D0 md=3DHOST =20 spd=3DFULL (12Mbps) pwr=3DON bLength =3D 0x0012 bDescriptorType =3D 0x0001 bcdUSB =3D 0x0200 bDeviceClass =3D 0x0000 bDeviceSubClass =3D 0x0000 bDeviceProtocol =3D 0x0000 bMaxPacketSize0 =3D 0x0008 idVendor =3D 0x04b4 idProduct =3D 0x121f bcdDevice =3D 0x0100 iManufacturer =3D 0x0001 <SteelSeries ApS> iProduct =3D 0x0002 <Ikari Laser> iSerialNumber =3D 0x0000 <no string> bNumConfigurations =3D 0x0001 The mouse connects via a hub on the USB keyboard. Thanks -al
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090619093017.23556vdb72x3mbk0>