Date: Fri, 9 Jun 2000 15:40:46 +0400 (MSD) From: vova@express.ru To: mobile@freebsd.org Cc: hadware@freebsd.org Subject: SONY Z505S Message-ID: <Pine.BSF.4.21.0006091425580.16649-100000@lanturn.kmost.express.ru>
next in thread | raw e-mail | index | archive | help
I've got subj. Successfuly runs: Vidio Audio Intell EtherExpress Serial Port Parralel Port USB Hub PCCard slot (atapi cdrom or sio2 in my case) What don't work: Rockwell HCF 56K Speakerphone PCI Modem (by win 0x2f8 irq 9) WinModem ? USB Floppy drive IR port (by BIOS: address 3E8 irq 10 DMA 0 FIR base address 140) 1394 Bus Controller Any suggestions ? May be anybody run IR port or USB floppy ? ==========[ boot dmesg ]================================================== CPU: Pentium II/Pentium II Xeon/Celeron (331.58-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 67043328 (65472K bytes) config> q Preloaded elf kernel "kernel" at 0xc038b000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc038b0a8. ccd0-3: Concatenated disk drivers Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard pci0: <PCI bus> on pcib0 fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xfcc0-0xfcff mem 0xfed00000-0xfedfffff,0xfecff000-0xfecfffff irq 9 at device 6.0 on pci0 fxp0: Ethernet address 08:00:46:04:31:b3 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfcb0-0xfcbf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfc60-0xfc7f irq 9 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub0: port 1 power on failed, IOERROR uhub0: port 2 power on failed, IOERROR intpm0: <Intel 82371AB Power management controller> port 0x2180-0x218f irq 9 at device 7.3 on pci0 intpm0: I/O mapped 2180 intpm0: intr IRQ 9 enabled revision 0 smbus0: <System Management Bus> on intsmb0 smb0: <SMBus general purpose I/O> on smbus0 intpm0: PM I/O mapped 8000 pci0: <NeoMagic MagicMedia 256AV SVGA controller> at 8.0 irq 9 pcm0: <NeoMagic 256AV> mem 0xfea00000-0xfeafffff,0xfe000000-0xfe3fffff irq 9 at device 8.1 on pci0 chip1: <Sony CXD1947A FireWire Host Controller> at device 9.0 on pci0 pcic-pci0: <Ricoh RL5C475 PCI-CardBus Bridge> at device 10.0 on pci0 pci0: <unknown card> (vendor=0x127a, dev=0x2005) at 11.0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A sio1: configured irq 9 not in bitmap of probed irqs 0 pca0 at port 0x40 on isa0 pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic0: management irq 10 pccard0: <PC Card bus -- kludge version> on pcic0 ppc0: This ppc chipset does not support the extended I/O port range...no problem ppc0: <Parallel port> at port 0x378-0x37b irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 unknown: <PNP0c02> can't assign resources unknown0: <PNP0c01> at iomem 0-0x9ffff,0xe4000-0xfffff,0x100000-0x3ffffff on isa0 unknown1: <PNP0c02> at iomem 0xdc000-0xdffff on isa0 unknown2: <PNP0200> at port 0-0xf,0x81-0x8f,0xc0-0xdf drq 4 on isa0 unknown: <PNP0000> can't assign resources unknown3: <PNP0100> at port 0x40-0x43 irq 0 on isa0 unknown4: <PNP0b00> at port 0x70-0x71 irq 8 on isa0 unknown: <PNP0303> can't assign resources npxisa0: <Legacy ISA coprocessor support> at port 0xf0-0xff irq 13 on isa0 pca1: <AT-style speaker sound> at port 0x61 on isa0 unknown5: <PNP0a03> at port 0xcf8-0xcff on isa0 unknown6: <PNP0e03> at port 0x3e1-0x3e2 on isa0 unknown: <PNP0401> can't assign resources unknown: <PNP0501> can't assign resources unknown: <SMCf010> can't assign resources unknown: <PNP0f13> can't assign resources IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default pccard: card inserted, slot 0 ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ad0: 6194MB <IBM-DBCA-206480> [13424/15/63] at ata0-master using UDMA33 ad1: 3MB <MEMORYSTICK 4M 8K> [247/2/16] at ata1-master using PIO1 Mounting root from ufs:/dev/ad0s2a pid 198 (ldconfig), uid 0: exited on signal 11 (core dumped) sio2 at port 0x2e8-0x2ef irq 11 slot 0 on pccard0 sio2: type 16550A -- TSB Russian Express, Moscow Vladimir B. Grebenschikov, vova@express.ru To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0006091425580.16649-100000>