Date: Wed, 24 Mar 2004 15:19:42 +0100 From: Randy Bush <randy@psg.com> To: David Coder <dacoder@dcoder.com> Cc: Peter Schuller <peter.schuller@infidyne.com> Subject: Re: em0 dead after suspend/restore on t40 Message-ID: <20040324141944.18FE043D1D@mx1.FreeBSD.org> References: <200403241432.18471.peter.schuller@infidyne.com> <20040324091231.T32064-100000@porky.dcoder.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> do you have 'hw.pci.allow_unsupported_io_range="1"' in your /boot/loader.conf > files? > > :on a t40 running -current, i will often, but not always, see > : > : em0: Link is up 1000 Mbps Full Duplex > : ... > : em0: The EEPROM Checksum Is Not Valid > : em0: Unable to initialize the hardware > : em0: The EEPROM Checksum Is Not Valid > : em0: Unable to initialize the hardware > : > :on a resume. after a reboot, > : > : em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> \ > : port 0x8000-0x803f mem 0xc0200000-0xc020ffff,0xc0220000-0xc023ffff \ > : irq 11 at device 1.0 on pci2 > : em0: Ethernet address: 00:0d:60:3b:5c:df > : em0: Speed:N/A Duplex:N/A > : ... > : em0: Link is up 1000 Mbps Full Duplex > : > :it will work fine. yes, in /boot/loader.conf.local randy --- Q: Because it reverses the logical flow of conversation. A: Why is top posting frowned upon?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040324141944.18FE043D1D>