Date: Sat, 31 Jul 2004 10:40:24 GMT From: Kazuyoshi Furutaka <furutaka@jb3.so-net.ne.jp> To: freebsd-alpha@FreeBSD.org Subject: Re: alpha/67626: X crashes an alpha machine, resulting reboot Message-ID: <200407311040.i6VAeO4r002200@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR alpha/67626; it has been noted by GNATS. From: Kazuyoshi Furutaka <furutaka@jb3.so-net.ne.jp> To: arved@FreeBSD.org Cc: Subject: Re: alpha/67626: X crashes an alpha machine, resulting reboot Date: Sat, 31 Jul 2004 15:58:22 +0900 (JST) ----Next_Part(Sat_Jul_31_15_58_22_2004_606)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello. Thanks for your e-mail and instruction and sorry for my late reply. From: Tilman Linneweh <arved@FreeBSD.org> Subject: Re: alpha/67626: X crashes an alpha machine, resulting reboot Date: Fri, 23 Jul 2004 12:08:40 GMT > Synopsis: X crashes an alpha machine, resulting reboot > > State-Changed-From-To: open->feedback > State-Changed-By: arved > State-Changed-When: Fri Jul 23 12:07:41 GMT 2004 > State-Changed-Why: > Can you try to set up a serial console to get a backtrace? > See for details: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/serialconsole-setup.html#SERIALCONSOLE-DDB > > http://www.freebsd.org/cgi/query-pr.cgi?pr=67626 I've tried to setup a serial console but couldn't get it working. I tried to setup a serial console to a FreeBSD/Alpha box from a Linux/i386 box using kermit or minicom connected by a commercial null-modem cable. First, I've made a new kernel with: device sio0 at isa? port IO_COM1 flags 0x10 irq 4 in the config file. According to the dmesg record I think it works. (Attached) Then I made the /boot.config file with a '-Dh' line. After setting AUTO_ACTION to boot in SRM and removing the attached keyboard, it didin't boot. (After several blinks of underline cursor, it changed to a block cursor, and keep scilent) With the keyboard attached again, it boots as before, but nothing appeared in the kermit console connected to the Alpha box. What's wrong? I'd be happy if you kindly teach me how to get the serial console in a step-by-step manner. Kazuyoshi -- Kazuyoshi Furutaka furutaka@jb3.so-net.ne.jp furutaka@tokai.jnc.go.jp ----Next_Part(Sat_Jul_31_15_58_22_2004_606)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.31jul2004" Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.10-RELEASE #2: Fri Jul 30 18:13:11 JST 2004 root@ram.furu.or.jp:/usr/src/sys/compile/RAM EB164 Digital AlphaPC 164LX 533 MHz, 531MHz 8192 byte page size, 1 processor. CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX> OSF PAL rev: 0x1000200020117 real memory = 132046848 (128952K bytes) avail memory = 122822656 (119944K bytes) Preloaded elf kernel "kernel" at 0xfffffc0000704000. md0: Malloc disk cia0: Pyxis, pass 1 cia0: extended capabilities: 1<BWEN> pcib0: <2117x PCI host bus adapter> on cia0 pci0: <PCI bus> on pcib0 ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x1000-0x10ff mem 0x82854000-0x82854fff irq 2 at device 5.0 on pci0 ahc0: interrupting at CIA irq 2 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x1200-0x127f mem 0x82856100-0x8285617f irq 0 at device 6.0 on pci0 xl0: Ethernet address: 00:50:04:ba:7e:4e miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: interrupting at CIA irq 0 pci0: <Matrox MGA Millennium II 2164W graphics accelerator> at 7.0 irq 1 isab0: <Intel 82378IB PCI to ISA bridge> at device 8.0 on pci0 isa0: <ISA bus> on isab0 sym0: <875> port 0x1100-0x11ff mem 0x82855000-0x82855fff,0x82856000-0x828560ff irq 3 at device 9.0 on pci0 sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: interrupting at CIA irq 3 atapci0: <CMD 646 ATA controller> port 0x1290-0x129f irq 5 at device 11.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: interrupting at ISA irq 6 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd0: interrupting at ISA irq 1 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio0: interrupting at ISA irq 4 sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0 sio1: type 16550A sio1: interrupting at ISA irq 3 ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode lpt0: <Printer> on ppbus0 lpt0: Polled port ppi0: <Parallel I/O> on ppbus0 ppc0: interrupting at ISA irq 7 Timecounter "alpha" frequency 533189952 Hz Waiting 15 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. da0 at ahc0 bus 0 target 6 lun 0 da0: <QUANTUM ATLAS_V_18_WLS 0230> Fixed Direct Access SCSI-3 device da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 17510MB (35861388 512 byte sectors: 255H 63S/T 2232C) Mounting root from ufs:/dev/da1a cd0 at sym0 bus 0 target 6 lun 0 cd0: <TOSHIBA CD-ROM XM-5701TA 1557> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 8) cd0: Attempt to query device size failed: NOT READY, Medium not present da1 at sym0 bus 0 target 0 lun 0 da1: <IBM DCAS-34330 S65A> Fixed Direct Access SCSI-2 device da1: 20.000MB/s transfers (20.000MHz, offset 15) da1: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C) da2 at sym0 bus 0 target 1 lun 0 da2: <IBM DCAS-34330 S65A> Fixed Direct Access SCSI-2 device da2: 20.000MB/s transfers (20.000MHz, offset 15) da2: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C) ----Next_Part(Sat_Jul_31_15_58_22_2004_606)----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200407311040.i6VAeO4r002200>