Date: Sun, 11 Oct 2015 18:37:29 +0000 (UTC) From: Sean Bruno <sbruno@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r289147 - head/sys/mips/conf Message-ID: <201510111837.t9BIbTPQ045739@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: sbruno Date: Sun Oct 11 18:37:29 2015 New Revision: 289147 URL: https://svnweb.freebsd.org/changeset/base/289147 Log: Correct flash layout (this is a 4M flash unit). Remove "rootfs" entry and assign the 800K or so to the kernel partition as this unit boots from usb mass storage. Modified: head/sys/mips/conf/TP-MR3020.hints Modified: head/sys/mips/conf/TP-MR3020.hints ============================================================================== --- head/sys/mips/conf/TP-MR3020.hints Sun Oct 11 18:26:06 2015 (r289146) +++ head/sys/mips/conf/TP-MR3020.hints Sun Oct 11 18:37:29 2015 (r289147) @@ -8,7 +8,7 @@ hint.argemdio.0.at="nexus0" hint.argemdio.0.maddr=0x1a000000 hint.argemdio.0.msize=0x1000 hint.argemdio.0.order=0 - + # There's no need to set the ar933x GMAC configuration bits. # This just creates a switch instance and correctly uses it. @@ -39,7 +39,7 @@ hint.ath.0.eepromsize=16384 hint.ar71xx.0.eeprom_mac_addr=0x1f01fc00 -# The board 16MiB flash layout in uboot env: +# The board 4MiB flash layout in uboot env: # # 256k(u-boot),64k(u-boot-env),2752k(rootfs),896k(uImage),64k(NVRAM),64k(ART) @@ -58,35 +58,28 @@ hint.map.1.at="flash/spi0" hint.map.1.start=0x00040000 hint.map.1.end=0x00050000 hint.map.1.name="uboot-env" -hint.map.1.readonly=0 +hint.map.1.readonly=1 -# 2752KB +# 3648KB hint.map.2.at="flash/spi0" hint.map.2.start=0x00050000 -hint.map.2.end="search:0x00100000:0x10000:.!/bin/sh" +hint.map.2.end=0x003e0000 hint.map.2.name="kernel" -hint.map.2.readonly=0 +hint.map.2.readonly=1 -# 896KB +# 64K NVRAM hint.map.3.at="flash/spi0" -hint.map.3.start="search:0x00100000:0x10000:.!/bin/sh" -hint.map.3.end=0x003e0000 -hint.map.3.name="rootfs" +hint.map.3.start=0x003e0000 +hint.map.3.end=0x003f0000 +hint.map.3.name="cfg" hint.map.3.readonly=0 -# 64K NVRAM -hint.map.4.at="flash/spi0" -hint.map.4.start=0x003e0000 -hint.map.4.end=0x003f0000 -hint.map.4.name="cfg" -hint.map.4.readonly=0 - # 64K ART -hint.map.5.at="flash/spi0" -hint.map.5.start=0x003f0000 -hint.map.5.end=0x00400000 -hint.map.5.name="art" -hint.map.5.readonly=1 +hint.map.4.at="flash/spi0" +hint.map.4.start=0x003f0000 +hint.map.4.end=0x00400000 +hint.map.4.name="art" +hint.map.4.readonly=1 # GPIO specific configuration block
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201510111837.t9BIbTPQ045739>