Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 19 Dec 2000 02:27:25 -0800
From:      "Shon Smith" <shonthomas@earthlink.net>
To:        "Cliff Sarginson" <cliff@raggedclown.net>, "Questions" <freebsd-questions@FreeBSD.ORG>
Subject:   RE: Can't get ppp to dial: "Chat script failed"
Message-ID:  <000401c069a6$47aa3ac0$0200a8c0@my.domain>
In-Reply-To: <E148JHp-000DGc-00@post.mail.nl.demon.net>

next in thread | previous in thread | raw e-mail | index | archive | help

> > I have been following the pedantic ppp primer very close, with no luck. I've
> > tried various variations as suggested in handbook and in email of others who
> > had similar problems.  I'm running Freebsd 4.2 release, and want to set up
> > bsd box as dialup gateway to isp.  Win 98 box is networked behind bsd box
> > with 10/100 switch. When I attempt to dial user ppp in interactive mode,
> > Chat script fails after about 5 seconds.  See below:
> > 
> > root /etc/ppp-->ppp
> > Working in interactive mode
> > Using interface: tun0
> > ppp ON nietzsche> dial provider
> > ppp ON nietzsche> Warning: Chat script failed
> > ppp ON nietzsche>
> > 	and then it just hangs.
> > 
> > If it's helpful, I've included (1)ppp.conf, (2)ppp.linkup,
> > (3)/var/log/ppp.log
> > any help fixing this chat script problem is much appreciated.
> > ~shon
> > __________________________________________________________________________
> > Here is ppp.conf:
> > 
> > default:
> >   # Ensure that "device" references the correct serial port
> >   # for your modem. (cuaa0 = COM1, cuaa1 = COM2)
> >   #
> >   set device /dev/cuaa0
> >   set speed 115200
> >   set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT \OK-AT-OK ATE1Q0
> > OK \\dATDT\\T TIMEOUT 40 CONNECT \"\""
> > #
> > provider:
> >   set phone 240-4492

> A shot in the dark, can you put A "-" in the phone number ? I don't think so...
> Cliff

I don't believe the dash is the issue. Still got the same error message: "Chat script failed."

> >   #  set login "TIMEOUT 10 \"\" \"\" gin:--gin: foo word: bar col: ppp"
> >   set timeout 300
> >   set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0
> >   add default HISADDR
> >   enable dns
> > ___________________________________________________________________________
> > Here is ppp.linkup:
> > 
> > provider:
> >   delete ALL
> >   add 0 0 HISADDR
> > ___________________________________________________________________________
> > Here is contents of /var/log/ppp.log:
> > 
> > Dec 18 22:52:45 nietzsche ppp[258]: Phase: Using interface: tun0
> > Dec 18 22:52:45 nietzsche ppp[258]: Phase: deflink: Created in closed state
> > Dec 18 22:52:45 nietzsche ppp[258]: Phase: PPP Started (interactive mode).
> > Dec 18 22:52:49 nietzsche ppp[258]: Phase: bundle: Establish
> > Dec 18 22:52:49 nietzsche ppp[258]: Phase: deflink: closed -> opening
> > Dec 18 22:52:49 nietzsche ppp[258]: Phase: deflink: Connected!
> > Dec 18 22:52:49 nietzsche ppp[258]: Phase: deflink: opening -> dial
> > Dec 18 22:52:59 nietzsche ppp[258]: Warning: Chat script failed
> > Dec 18 22:52:59 nietzsche ppp[258]: Phase: deflink: dial -> hangup
> > Dec 18 22:52:59 nietzsche ppp[258]: Phase: deflink: Disconnected!
> > Dec 18 22:52:59 nietzsche ppp[258]: Phase: deflink: Connect time: 10 secs: 0
> > octets in, 0 octets out
> > Dec 18 22:52:59 nietzsche ppp[258]: Phase: deflink: : 0 packets in, 0
> > packets out
> > Dec 18 22:52:59 nietzsche ppp[258]: Phase:  total 0 bytes/sec, peak 0
> > bytes/sec on Mon Dec 18 22:52:59 2000
> > Dec 18 22:52:59 nietzsche ppp[258]: Phase: deflink: hangup -> closed
> > Dec 18 22:52:59 nietzsche ppp[258]: Phase: bundle: Dead
> > Dec 18 22:53:03 nietzsche ppp[258]: Phase: PPP Terminated (normal).
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-questions" in the body of the message
> 
> 
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
> 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000401c069a6$47aa3ac0$0200a8c0>