Date: Mon, 6 Mar 2006 15:09:45 +1030 From: "Daniel O'Connor" <doconnor@gsoft.com.au> To: freebsd-stable@freebsd.org Cc: re@freebsd.org Subject: 6.1BETA3 amd64 doesn't detect my floppy drive Message-ID: <200603061509.53498.doconnor@gsoft.com.au>
next in thread | raw e-mail | index | archive | help
--nextPart1768291.p1rYIi4NCS Content-Type: multipart/mixed; boundary="Boundary-01=_S07CELEHZRYIZOZ" Content-Transfer-Encoding: 7bit Content-Disposition: inline --Boundary-01=_S07CELEHZRYIZOZ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi, I have an amd64 system with an ASUS A8V Deluxe/WIFI-G motherboard (and a panasonic FDD). I get the following output when trying to boot 6.1-BETA3= =2E. =2E.. fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 =2E.. Also I get that set of messages twice(!) Once before probing sioX and=20 once after. I've attached the full dmesg. I couldn't see anything in the BIOS related t= o=20 the floppy drive (only serial & parallel both of which are enabled). The system in question normally runs 6.0-RC1 - I've attached a dmesg from t= hat. I see the only place ENOMEM in the FDC code is if malloc fails but I don't= =20 see the printf that goes with that so it must be something else. =2D-=20 Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C --Boundary-01=_S07CELEHZRYIZOZ Content-Type: text/plain; charset="us-ascii"; name="6.1-BETA3-dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="6.1-BETA3-dmesg.txt" Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 6.0-RC1 #0: Wed Oct 26 13:29:47 UTC 2005 root@chungli-pr.gsoft.com.au:/usr/obj/local0/src/sys/GENESIS ACPI APIC Table: <A M I OEMAPIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3200+ (2002.57-MHz K8-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x20ff2 Stepping =3D 2 Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=3D0x1<SSE3> AMD Features=3D0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow> real memory =3D 536543232 (511 MB) avail memory =3D 508919808 (485 MB) MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 0.3> irqs 0-23 on motherboard acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 7 on acpi0 pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0 pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0 pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0 pci_link7: <ACPI PCI Link LNKH> irq 0 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA K8T800Pro host to PCI bridge> mem 0xe4000000-0xe7ffffff at devic= e 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 drm0: <ATI Radeon RV280 9200> port 0xe000-0xe0ff mem 0xe8000000-0xefffffff,= 0xfbe00000-0xfbe0ffff irq 16 at device 0.0 on pci1 info: [drm] AGP at 0xe4000000 64MB info: [drm] Initialized radeon 1.16.0 20050311 on minor 0 pci1: <display> at device 0.1 (no driver attached) fwohci0: <VIA Fire II (VT6306)> port 0x7000-0x707f mem 0xfb100000-0xfb1007f= f irq 16 at device 7.0 on pci0 fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:4f:85:fa fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) atapci0: <Promise PDC20378 SATA150 controller> port 0x8000-0x803f,0x7800-0x= 780f,0x7400-0x747f mem 0xfb300000-0xfb300fff,0xfb200000-0xfb21ffff irq 18 a= t device 8.0 on pci0 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 pci0: <simple comms, UART> at device 9.0 (no driver attached) skc0: <Marvell Gigabit Ethernet> port 0x9000-0x90ff mem 0xfb600000-0xfb603f= ff irq 17 at device 10.0 on pci0 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:13:d4:78:24:72 miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,= auto pci0: <network, ethernet> at device 11.0 (no driver attached) pci0: <unknown> at device 14.0 (no driver attached) atapci1: <VIA 6420 SATA150 controller> port 0xc000-0xc007,0xb800-0xb803,0xb= 400-0xb407,0xb000-0xb003,0xa800-0xa80f,0xa400-0xa4ff irq 20 at device 15.0 = on pci0 ata5: <ATA channel 0> on atapci1 ata6: <ATA channel 1> on atapci1 atapci2: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0= x376,0xfc00-0xfc0f at device 15.1 on pci0 ata0: <ATA channel 0> on atapci2 ata1: <ATA channel 1> on atapci2 uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.0= on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device 16.1= on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 21 at device 16.2= on pci0 uhci2: [GIANT-LOCKED] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.3= on pci0 uhci3: [GIANT-LOCKED] usb3: <VIA 83C572 USB controller> on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfbc00000-0xfbc000ff irq 21 at = device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: waiting for BIOS to give up control usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <VIA VT6202 USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 pcm0: <VIA VT8237> port 0xd800-0xd8ff irq 22 at device 17.5 on pci0 pcm0: [GIANT-LOCKED] pcm0: <Avance Logic ALC850 AC97 Codec> acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acp= i0 sio0: type 16550A sio1: configured irq 4 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Darfon USB Optical Mouse, rev 1.10/3.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 2002572145 Hz quality 800 Timecounters tick every 1.000 msec acd0: DVDR <PIONEER DVD-RW DVR-110D/1.17> at ata0-master UDMA66 ad0: 238475MB <HDT722525DLA380 V44OA96A> at ata2-master SATA150 ad1: 238475MB <HDT722525DLA380 V44OA96A> at ata3-master SATA150 ad2: 152627MB <WDC WD1600JB-00GVA0 08.02D08> at ata4-master UDMA100 ad3: 152627MB <WDC WD1600JB-00GVA0 08.02D08> at ata4-slave UDMA100 ar0: 238418MB <Promise Fasttrak RAID1> status: READY ar0: disk0 READY (master) using ad0 at ata2-master ar0: disk1 READY (mirror) using ad1 at ata3-master ar1: 152587MB <Promise Fasttrak RAID1> status: READY ar1: disk0 READY (master) using ad2 at ata4-master ar1: disk1 READY (mirror) using ad3 at ata4-slave cd0 at ata0 bus 0 target 0 lun 0 cd0: <PIONEER DVD-RW DVR-110D 1.17> Removable CD-ROM SCSI-0 device=20 cd0: 66.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ar0s1a gsio0: <Genesis Software I/O adapter> port 0xa000-0xa07f,0x9800-0x980f mem = 0xfba00000-0xfba0007f,0xfb900000-0xfb901fff irq 19 at device 14.0 on pci0 gsio0: [GIANT-LOCKED] gsio0: LCR at 0xa000, I/O at 0x9800, memory at 0xfb900000, S/N 98006 mdsio0: configured irq 16 not in bitmap of probed irqs 0 mdsio0: irq maps: 0 0 0 0 mdsio0: <Decision PCCOM RS232/422/486 adapter> port 0x8800-0x887f,0x8400-0x= 84ff mem 0xfb400000-0xfb40007f irq 16 at device 9.0 on pci0 mdsio0: type 16550A mdsio0: 2-wire mode, RTS transmit control, ignoring RX during TX. mdsio0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range info: [drm] Loading R200 Microcode GEOM_LABEL: Label for provider ar1s1e is ufs/metatronusr. GEOM_LABEL: Label for provider ar1s1d is ufs/metatronvar. GEOM_LABEL: Label for provider ar1s1a is ufs/metatronslash. WARNING: /mnt/metatron: multilabel flag on fs but no MAC support WARNING: /mnt/metatron/var: multilabel flag on fs but no MAC support WARNING: /mnt/metatron/usr: multilabel flag on fs but no MAC support Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...4 4 3 3 0 1 1 0 0 0 done All buffers synced. Uptime: 3d19h48m31s Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 6.1-BETA3 #0: Thu Mar 2 14:31:20 UTC 2006 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3200+ (2002.58-MHz K8-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x20ff2 Stepping =3D 2 Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=3D0x1<SSE3> AMD Features=3D0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow> real memory =3D 536543232 (511 MB) avail memory =3D 502259712 (478 MB) ACPI APIC Table: <A M I OEMAPIC > MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 0.3> irqs 0-23 on motherboard acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA K8T800Pro host to PCI bridge> mem 0xe4000000-0xe7ffffff at devic= e 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) fwohci0: <VIA Fire II (VT6306)> port 0x7000-0x707f mem 0xfb100000-0xfb1007f= f irq 16 at device 7.0 on pci0 fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:4f:85:fa fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:4f:85:fa fwe0: Ethernet address: 02:11:d8:4f:85:fa fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) atapci0: <Promise PDC20378 SATA150 controller> port 0x8000-0x803f,0x7800-0x= 780f,0x7400-0x747f mem 0xfb300000-0xfb300fff,0xfb200000-0xfb21ffff irq 18 a= t device 8.0 on pci0 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 pci0: <simple comms, UART> at device 9.0 (no driver attached) skc0: <Marvell Gigabit Ethernet> port 0x9000-0x90ff mem 0xfb600000-0xfb603f= ff irq 17 at device 10.0 on pci0 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:13:d4:78:24:72 miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,= auto rl0: <RealTek 8139 10/100BaseTX> port 0x9400-0x94ff mem 0xfb800000-0xfb8000= ff irq 16 at device 11.0 on pci0 miibus1: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0b:2b:03:d3:7e pci0: <unknown> at device 14.0 (no driver attached) atapci1: <VIA 6420 SATA150 controller> port 0xc000-0xc007,0xb800-0xb803,0xb= 400-0xb407,0xb000-0xb003,0xa800-0xa80f,0xa400-0xa4ff irq 20 at device 15.0 = on pci0 ata5: <ATA channel 0> on atapci1 ata6: <ATA channel 1> on atapci1 atapci2: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0= x376,0xfc00-0xfc0f at device 15.1 on pci0 ata0: <ATA channel 0> on atapci2 ata1: <ATA channel 1> on atapci2 uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.0= on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device 16.1= on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 21 at device 16.2= on pci0 uhci2: [GIANT-LOCKED] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.3= on pci0 uhci3: [GIANT-LOCKED] usb3: <VIA 83C572 USB controller> on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfbc00000-0xfbc000ff irq 21 at = device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: waiting for BIOS to give up control usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <VIA VT6202 USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 pci0: <multimedia, audio> at device 17.5 (no driver attached) acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acp= i0 sio0: type 16550A sio1: configured irq 4 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Darfon USB Optical Mouse, rev 1.10/3.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 2002578381 Hz quality 800 Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff805ee760, 0) error 6 md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff8098be10 acd0: DVDR <PIONEER DVD-RW DVR-110D/1.17> at ata0-master UDMA66 ad4: 238475MB <HDT722525DLA380 V44OA96A> at ata2-master SATA150 ad6: 238475MB <HDT722525DLA380 V44OA96A> at ata3-master SATA150 ad8: 152627MB <WDC WD1600JB-00GVA0 08.02D08> at ata4-master UDMA100 ad9: 152627MB <WDC WD1600JB-00GVA0 08.02D08> at ata4-slave UDMA100 ar0: 238418MB <Promise Fasttrak RAID1> status: READY ar0: disk0 READY (master) using ad4 at ata2-master ar0: disk1 READY (mirror) using ad6 at ata3-master ar1: 152587MB <Promise Fasttrak RAID1> status: READY ar1: disk0 READY (master) using ad8 at ata4-master ar1: disk1 READY (mirror) using ad9 at ata4-slave Trying to mount root from ufs:/dev/md0 Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 6.1-BETA3 #0: Thu Mar 2 14:31:20 UTC 2006 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3200+ (2002.57-MHz K8-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x20ff2 Stepping =3D 2 Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=3D0x1<SSE3> AMD Features=3D0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow> real memory =3D 536543232 (511 MB) avail memory =3D 502259712 (478 MB) ACPI APIC Table: <A M I OEMAPIC > MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 0.3> irqs 0-23 on motherboard acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA K8T800Pro host to PCI bridge> mem 0xe4000000-0xe7ffffff at devic= e 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) fwohci0: <VIA Fire II (VT6306)> port 0x7000-0x707f mem 0xfb100000-0xfb1007f= f irq 16 at device 7.0 on pci0 fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:4f:85:fa fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:4f:85:fa fwe0: Ethernet address: 02:11:d8:4f:85:fa fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) atapci0: <Promise PDC20378 SATA150 controller> port 0x8000-0x803f,0x7800-0x= 780f,0x7400-0x747f mem 0xfb300000-0xfb300fff,0xfb200000-0xfb21ffff irq 18 a= t device 8.0 on pci0 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 pci0: <simple comms, UART> at device 9.0 (no driver attached) skc0: <Marvell Gigabit Ethernet> port 0x9000-0x90ff mem 0xfb600000-0xfb603f= ff irq 17 at device 10.0 on pci0 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:13:d4:78:24:72 miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,= auto rl0: <RealTek 8139 10/100BaseTX> port 0x9400-0x94ff mem 0xfb800000-0xfb8000= ff irq 16 at device 11.0 on pci0 miibus1: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0b:2b:03:d3:7e pci0: <unknown> at device 14.0 (no driver attached) atapci1: <VIA 6420 SATA150 controller> port 0xc000-0xc007,0xb800-0xb803,0xb= 400-0xb407,0xb000-0xb003,0xa800-0xa80f,0xa400-0xa4ff irq 20 at device 15.0 = on pci0 ata5: <ATA channel 0> on atapci1 ata6: <ATA channel 1> on atapci1 atapci2: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0= x376,0xfc00-0xfc0f at device 15.1 on pci0 ata0: <ATA channel 0> on atapci2 ata1: <ATA channel 1> on atapci2 uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.0= on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device 16.1= on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 21 at device 16.2= on pci0 uhci2: [GIANT-LOCKED] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.3= on pci0 uhci3: [GIANT-LOCKED] usb3: <VIA 83C572 USB controller> on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfbc00000-0xfbc000ff irq 21 at = device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: waiting for BIOS to give up control usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <VIA VT6202 USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 pci0: <multimedia, audio> at device 17.5 (no driver attached) acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acp= i0 sio0: type 16550A sio1: configured irq 4 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Darfon USB Optical Mouse, rev 1.10/3.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 2002570157 Hz quality 800 Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff805ee760, 0) error 6 md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff8098be10 acd0: DVDR <PIONEER DVD-RW DVR-110D/1.17> at ata0-master UDMA66 ad4: 238475MB <HDT722525DLA380 V44OA96A> at ata2-master SATA150 ad6: 238475MB <HDT722525DLA380 V44OA96A> at ata3-master SATA150 ad8: 152627MB <WDC WD1600JB-00GVA0 08.02D08> at ata4-master UDMA100 ad9: 152627MB <WDC WD1600JB-00GVA0 08.02D08> at ata4-slave UDMA100 ar0: 238418MB <Promise Fasttrak RAID1> status: READY ar0: disk0 READY (master) using ad4 at ata2-master ar0: disk1 READY (mirror) using ad6 at ata3-master ar1: 152587MB <Promise Fasttrak RAID1> status: READY ar1: disk0 READY (master) using ad8 at ata4-master ar1: disk1 READY (mirror) using ad9 at ata4-slave Trying to mount root from ufs:/dev/md0 --Boundary-01=_S07CELEHZRYIZOZ Content-Type: text/plain; charset="us-ascii"; name="6.0-RC1-dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="6.0-RC1-dmesg.txt" Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 6.0-RC1 #0: Wed Oct 26 13:29:47 UTC 2005 root@chungli-pr.gsoft.com.au:/usr/obj/local0/src/sys/GENESIS ACPI APIC Table: <A M I OEMAPIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3200+ (2002.57-MHz K8-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x20ff2 Stepping =3D 2 Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=3D0x1<SSE3> AMD Features=3D0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow> real memory =3D 536543232 (511 MB) avail memory =3D 508919808 (485 MB) MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 0.3> irqs 0-23 on motherboard acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 7 on acpi0 pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0 pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0 pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0 pci_link7: <ACPI PCI Link LNKH> irq 0 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA K8T800Pro host to PCI bridge> mem 0xe4000000-0xe7ffffff at devic= e 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 drm0: <ATI Radeon RV280 9200> port 0xe000-0xe0ff mem 0xe8000000-0xefffffff,= 0xfbe00000-0xfbe0ffff irq 16 at device 0.0 on pci1 info: [drm] AGP at 0xe4000000 64MB info: [drm] Initialized radeon 1.16.0 20050311 on minor 0 pci1: <display> at device 0.1 (no driver attached) fwohci0: <VIA Fire II (VT6306)> port 0x7000-0x707f mem 0xfb100000-0xfb1007f= f irq 16 at device 7.0 on pci0 fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:4f:85:fa fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) atapci0: <Promise PDC20378 SATA150 controller> port 0x8000-0x803f,0x7800-0x= 780f,0x7400-0x747f mem 0xfb300000-0xfb300fff,0xfb200000-0xfb21ffff irq 18 a= t device 8.0 on pci0 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 pci0: <simple comms, UART> at device 9.0 (no driver attached) skc0: <Marvell Gigabit Ethernet> port 0x9000-0x90ff mem 0xfb600000-0xfb603f= ff irq 17 at device 10.0 on pci0 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:13:d4:78:24:72 miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,= auto pci0: <network, ethernet> at device 11.0 (no driver attached) pci0: <unknown> at device 14.0 (no driver attached) atapci1: <VIA 6420 SATA150 controller> port 0xc000-0xc007,0xb800-0xb803,0xb= 400-0xb407,0xb000-0xb003,0xa800-0xa80f,0xa400-0xa4ff irq 20 at device 15.0 = on pci0 ata5: <ATA channel 0> on atapci1 ata6: <ATA channel 1> on atapci1 atapci2: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0= x376,0xfc00-0xfc0f at device 15.1 on pci0 ata0: <ATA channel 0> on atapci2 ata1: <ATA channel 1> on atapci2 uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.0= on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device 16.1= on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 21 at device 16.2= on pci0 uhci2: [GIANT-LOCKED] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.3= on pci0 uhci3: [GIANT-LOCKED] usb3: <VIA 83C572 USB controller> on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfbc00000-0xfbc000ff irq 21 at = device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: waiting for BIOS to give up control usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <VIA VT6202 USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 pcm0: <VIA VT8237> port 0xd800-0xd8ff irq 22 at device 17.5 on pci0 pcm0: [GIANT-LOCKED] pcm0: <Avance Logic ALC850 AC97 Codec> acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acp= i0 sio0: type 16550A sio1: configured irq 4 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Darfon USB Optical Mouse, rev 1.10/3.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 2002572145 Hz quality 800 Timecounters tick every 1.000 msec acd0: DVDR <PIONEER DVD-RW DVR-110D/1.17> at ata0-master UDMA66 ad0: 238475MB <HDT722525DLA380 V44OA96A> at ata2-master SATA150 ad1: 238475MB <HDT722525DLA380 V44OA96A> at ata3-master SATA150 ad2: 152627MB <WDC WD1600JB-00GVA0 08.02D08> at ata4-master UDMA100 ad3: 152627MB <WDC WD1600JB-00GVA0 08.02D08> at ata4-slave UDMA100 ar0: 238418MB <Promise Fasttrak RAID1> status: READY ar0: disk0 READY (master) using ad0 at ata2-master ar0: disk1 READY (mirror) using ad1 at ata3-master ar1: 152587MB <Promise Fasttrak RAID1> status: READY ar1: disk0 READY (master) using ad2 at ata4-master ar1: disk1 READY (mirror) using ad3 at ata4-slave cd0 at ata0 bus 0 target 0 lun 0 cd0: <PIONEER DVD-RW DVR-110D 1.17> Removable CD-ROM SCSI-0 device=20 cd0: 66.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ar0s1a gsio0: <Genesis Software I/O adapter> port 0xa000-0xa07f,0x9800-0x980f mem = 0xfba00000-0xfba0007f,0xfb900000-0xfb901fff irq 19 at device 14.0 on pci0 gsio0: [GIANT-LOCKED] gsio0: LCR at 0xa000, I/O at 0x9800, memory at 0xfb900000, S/N 98006 mdsio0: configured irq 16 not in bitmap of probed irqs 0 mdsio0: irq maps: 0 0 0 0 mdsio0: <Decision PCCOM RS232/422/486 adapter> port 0x8800-0x887f,0x8400-0x= 84ff mem 0xfb400000-0xfb40007f irq 16 at device 9.0 on pci0 mdsio0: type 16550A mdsio0: 2-wire mode, RTS transmit control, ignoring RX during TX. mdsio0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range info: [drm] Loading R200 Microcode GEOM_LABEL: Label for provider ar1s1e is ufs/metatronusr. GEOM_LABEL: Label for provider ar1s1d is ufs/metatronvar. GEOM_LABEL: Label for provider ar1s1a is ufs/metatronslash. WARNING: /mnt/metatron: multilabel flag on fs but no MAC support WARNING: /mnt/metatron/var: multilabel flag on fs but no MAC support WARNING: /mnt/metatron/usr: multilabel flag on fs but no MAC support Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...4 4 3 3 0 1 1 0 0 0 done All buffers synced. Uptime: 3d19h48m31s Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 6.1-BETA3 #0: Thu Mar 2 14:31:20 UTC 2006 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3200+ (2002.58-MHz K8-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x20ff2 Stepping =3D 2 Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=3D0x1<SSE3> AMD Features=3D0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow> real memory =3D 536543232 (511 MB) avail memory =3D 502259712 (478 MB) ACPI APIC Table: <A M I OEMAPIC > MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 0.3> irqs 0-23 on motherboard acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA K8T800Pro host to PCI bridge> mem 0xe4000000-0xe7ffffff at devic= e 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) fwohci0: <VIA Fire II (VT6306)> port 0x7000-0x707f mem 0xfb100000-0xfb1007f= f irq 16 at device 7.0 on pci0 fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:4f:85:fa fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:4f:85:fa fwe0: Ethernet address: 02:11:d8:4f:85:fa fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) atapci0: <Promise PDC20378 SATA150 controller> port 0x8000-0x803f,0x7800-0x= 780f,0x7400-0x747f mem 0xfb300000-0xfb300fff,0xfb200000-0xfb21ffff irq 18 a= t device 8.0 on pci0 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 pci0: <simple comms, UART> at device 9.0 (no driver attached) skc0: <Marvell Gigabit Ethernet> port 0x9000-0x90ff mem 0xfb600000-0xfb603f= ff irq 17 at device 10.0 on pci0 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:13:d4:78:24:72 miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,= auto rl0: <RealTek 8139 10/100BaseTX> port 0x9400-0x94ff mem 0xfb800000-0xfb8000= ff irq 16 at device 11.0 on pci0 miibus1: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0b:2b:03:d3:7e pci0: <unknown> at device 14.0 (no driver attached) atapci1: <VIA 6420 SATA150 controller> port 0xc000-0xc007,0xb800-0xb803,0xb= 400-0xb407,0xb000-0xb003,0xa800-0xa80f,0xa400-0xa4ff irq 20 at device 15.0 = on pci0 ata5: <ATA channel 0> on atapci1 ata6: <ATA channel 1> on atapci1 atapci2: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0= x376,0xfc00-0xfc0f at device 15.1 on pci0 ata0: <ATA channel 0> on atapci2 ata1: <ATA channel 1> on atapci2 uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.0= on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device 16.1= on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 21 at device 16.2= on pci0 uhci2: [GIANT-LOCKED] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.3= on pci0 uhci3: [GIANT-LOCKED] usb3: <VIA 83C572 USB controller> on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfbc00000-0xfbc000ff irq 21 at = device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: waiting for BIOS to give up control usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <VIA VT6202 USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 pci0: <multimedia, audio> at device 17.5 (no driver attached) acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acp= i0 sio0: type 16550A sio1: configured irq 4 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Darfon USB Optical Mouse, rev 1.10/3.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 2002578381 Hz quality 800 Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff805ee760, 0) error 6 md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff8098be10 acd0: DVDR <PIONEER DVD-RW DVR-110D/1.17> at ata0-master UDMA66 ad4: 238475MB <HDT722525DLA380 V44OA96A> at ata2-master SATA150 ad6: 238475MB <HDT722525DLA380 V44OA96A> at ata3-master SATA150 ad8: 152627MB <WDC WD1600JB-00GVA0 08.02D08> at ata4-master UDMA100 ad9: 152627MB <WDC WD1600JB-00GVA0 08.02D08> at ata4-slave UDMA100 ar0: 238418MB <Promise Fasttrak RAID1> status: READY ar0: disk0 READY (master) using ad4 at ata2-master ar0: disk1 READY (mirror) using ad6 at ata3-master ar1: 152587MB <Promise Fasttrak RAID1> status: READY ar1: disk0 READY (master) using ad8 at ata4-master ar1: disk1 READY (mirror) using ad9 at ata4-slave Trying to mount root from ufs:/dev/md0 Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 6.1-BETA3 #0: Thu Mar 2 14:31:20 UTC 2006 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3200+ (2002.57-MHz K8-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x20ff2 Stepping =3D 2 Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=3D0x1<SSE3> AMD Features=3D0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow> real memory =3D 536543232 (511 MB) avail memory =3D 502259712 (478 MB) ACPI APIC Table: <A M I OEMAPIC > MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 0.3> irqs 0-23 on motherboard acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA K8T800Pro host to PCI bridge> mem 0xe4000000-0xe7ffffff at devic= e 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) fwohci0: <VIA Fire II (VT6306)> port 0x7000-0x707f mem 0xfb100000-0xfb1007f= f irq 16 at device 7.0 on pci0 fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:4f:85:fa fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:4f:85:fa fwe0: Ethernet address: 02:11:d8:4f:85:fa fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) atapci0: <Promise PDC20378 SATA150 controller> port 0x8000-0x803f,0x7800-0x= 780f,0x7400-0x747f mem 0xfb300000-0xfb300fff,0xfb200000-0xfb21ffff irq 18 a= t device 8.0 on pci0 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 pci0: <simple comms, UART> at device 9.0 (no driver attached) skc0: <Marvell Gigabit Ethernet> port 0x9000-0x90ff mem 0xfb600000-0xfb603f= ff irq 17 at device 10.0 on pci0 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:13:d4:78:24:72 miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,= auto rl0: <RealTek 8139 10/100BaseTX> port 0x9400-0x94ff mem 0xfb800000-0xfb8000= ff irq 16 at device 11.0 on pci0 miibus1: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0b:2b:03:d3:7e pci0: <unknown> at device 14.0 (no driver attached) atapci1: <VIA 6420 SATA150 controller> port 0xc000-0xc007,0xb800-0xb803,0xb= 400-0xb407,0xb000-0xb003,0xa800-0xa80f,0xa400-0xa4ff irq 20 at device 15.0 = on pci0 ata5: <ATA channel 0> on atapci1 ata6: <ATA channel 1> on atapci1 atapci2: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0= x376,0xfc00-0xfc0f at device 15.1 on pci0 ata0: <ATA channel 0> on atapci2 ata1: <ATA channel 1> on atapci2 uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.0= on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device 16.1= on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 21 at device 16.2= on pci0 uhci2: [GIANT-LOCKED] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.3= on pci0 uhci3: [GIANT-LOCKED] usb3: <VIA 83C572 USB controller> on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfbc00000-0xfbc000ff irq 21 at = device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: waiting for BIOS to give up control usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <VIA VT6202 USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 pci0: <multimedia, audio> at device 17.5 (no driver attached) acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acp= i0 sio0: type 16550A sio1: configured irq 4 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Darfon USB Optical Mouse, rev 1.10/3.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 2002570157 Hz quality 800 Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff805ee760, 0) error 6 md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff8098be10 acd0: DVDR <PIONEER DVD-RW DVR-110D/1.17> at ata0-master UDMA66 ad4: 238475MB <HDT722525DLA380 V44OA96A> at ata2-master SATA150 ad6: 238475MB <HDT722525DLA380 V44OA96A> at ata3-master SATA150 ad8: 152627MB <WDC WD1600JB-00GVA0 08.02D08> at ata4-master UDMA100 ad9: 152627MB <WDC WD1600JB-00GVA0 08.02D08> at ata4-slave UDMA100 ar0: 238418MB <Promise Fasttrak RAID1> status: READY ar0: disk0 READY (master) using ad4 at ata2-master ar0: disk1 READY (mirror) using ad6 at ata3-master ar1: 152587MB <Promise Fasttrak RAID1> status: READY ar1: disk0 READY (master) using ad8 at ata4-master ar1: disk1 READY (mirror) using ad9 at ata4-slave Trying to mount root from ufs:/dev/md0 Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 6.0-RC1 #0: Wed Oct 26 13:29:47 UTC 2005 root@chungli-pr.gsoft.com.au:/usr/obj/local0/src/sys/GENESIS ACPI APIC Table: <A M I OEMAPIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3200+ (2002.58-MHz K8-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x20ff2 Stepping =3D 2 Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=3D0x1<SSE3> AMD Features=3D0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow> real memory =3D 536543232 (511 MB) avail memory =3D 508919808 (485 MB) MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 0.3> irqs 0-23 on motherboard acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0 pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0 pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0 pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0 pci_link7: <ACPI PCI Link LNKH> irq 0 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA K8T800Pro host to PCI bridge> mem 0xe4000000-0xe7ffffff at devic= e 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 drm0: <ATI Radeon RV280 9200> port 0xe000-0xe0ff mem 0xe8000000-0xefffffff,= 0xfbe00000-0xfbe0ffff irq 16 at device 0.0 on pci1 info: [drm] AGP at 0xe4000000 64MB info: [drm] Initialized radeon 1.16.0 20050311 on minor 0 pci1: <display> at device 0.1 (no driver attached) fwohci0: <VIA Fire II (VT6306)> port 0x7000-0x707f mem 0xfb100000-0xfb1007f= f irq 16 at device 7.0 on pci0 fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:4f:85:fa fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) atapci0: <Promise PDC20378 SATA150 controller> port 0x8000-0x803f,0x7800-0x= 780f,0x7400-0x747f mem 0xfb300000-0xfb300fff,0xfb200000-0xfb21ffff irq 18 a= t device 8.0 on pci0 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 pci0: <simple comms, UART> at device 9.0 (no driver attached) skc0: <Marvell Gigabit Ethernet> port 0x9000-0x90ff mem 0xfb600000-0xfb603f= ff irq 17 at device 10.0 on pci0 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:13:d4:78:24:72 miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,= auto pci0: <network, ethernet> at device 11.0 (no driver attached) pci0: <unknown> at device 14.0 (no driver attached) atapci1: <VIA 6420 SATA150 controller> port 0xc000-0xc007,0xb800-0xb803,0xb= 400-0xb407,0xb000-0xb003,0xa800-0xa80f,0xa400-0xa4ff irq 20 at device 15.0 = on pci0 ata5: <ATA channel 0> on atapci1 ata6: <ATA channel 1> on atapci1 atapci2: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0= x376,0xfc00-0xfc0f at device 15.1 on pci0 ata0: <ATA channel 0> on atapci2 ata1: <ATA channel 1> on atapci2 uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.0= on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device 16.1= on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 21 at device 16.2= on pci0 uhci2: [GIANT-LOCKED] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.3= on pci0 uhci3: [GIANT-LOCKED] usb3: <VIA 83C572 USB controller> on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfbc00000-0xfbc000ff irq 21 at = device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: waiting for BIOS to give up control usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <VIA VT6202 USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 pcm0: <VIA VT8237> port 0xd800-0xd8ff irq 22 at device 17.5 on pci0 pcm0: [GIANT-LOCKED] pcm0: <Avance Logic ALC850 AC97 Codec> acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acp= i0 sio0: type 16550A sio1: configured irq 4 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Darfon USB Optical Mouse, rev 1.10/3.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 2002578801 Hz quality 800 Timecounters tick every 1.000 msec acd0: DVDR <PIONEER DVD-RW DVR-110D/1.17> at ata0-master UDMA66 ad0: 238475MB <HDT722525DLA380 V44OA96A> at ata2-master SATA150 ad1: 238475MB <HDT722525DLA380 V44OA96A> at ata3-master SATA150 ad2: 152627MB <WDC WD1600JB-00GVA0 08.02D08> at ata4-master UDMA100 ad3: 152627MB <WDC WD1600JB-00GVA0 08.02D08> at ata4-slave UDMA100 ar0: 238418MB <Promise Fasttrak RAID1> status: READY ar0: disk0 READY (master) using ad0 at ata2-master ar0: disk1 READY (mirror) using ad1 at ata3-master ar1: 152587MB <Promise Fasttrak RAID1> status: READY ar1: disk0 READY (master) using ad2 at ata4-master ar1: disk1 READY (mirror) using ad3 at ata4-slave cd0 at ata0 bus 0 target 0 lun 0 cd0: <PIONEER DVD-RW DVR-110D 1.17> Removable CD-ROM SCSI-0 device=20 cd0: 66.000MB/s transfers cd0: cd present [276839 x 2048 byte records] Trying to mount root from ufs:/dev/ar0s1a gsio0: <Genesis Software I/O adapter> port 0xa000-0xa07f,0x9800-0x980f mem = 0xfba00000-0xfba0007f,0xfb900000-0xfb901fff irq 19 at device 14.0 on pci0 gsio0: [GIANT-LOCKED] gsio0: LCR at 0xa000, I/O at 0x9800, memory at 0xfb900000, S/N 98006 mdsio0: configured irq 16 not in bitmap of probed irqs 0 mdsio0: irq maps: 0 0 0 0 mdsio0: <Decision PCCOM RS232/422/486 adapter> port 0x8800-0x887f,0x8400-0x= 84ff mem 0xfb400000-0xfb40007f irq 16 at device 9.0 on pci0 mdsio0: type 16550A mdsio0: 2-wire mode, RTS transmit control, ignoring RX during TX. mdsio0: [GIANT-LOCKED] info: [drm] Loading R200 Microcode --Boundary-01=_S07CELEHZRYIZOZ-- --nextPart1768291.p1rYIi4NCS Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.1 (FreeBSD) iD8DBQBEC70Z5ZPcIHs/zowRAl5eAKCGPeX3APKwJldptXnTERqTGGglAwCgjVmn zweYVJMRD774m2jWKUBq8lY= =D4OE -----END PGP SIGNATURE----- --nextPart1768291.p1rYIi4NCS--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200603061509.53498.doconnor>