Date: Mon, 3 Jun 2002 10:35:31 +0200 From: Niek Bergboer <niek@bergboer.net> To: freebsd-stable@freebsd.org Subject: Re: Tagged IBM ATA drives under nowadays -stable Message-ID: <20020603103531.A8355@wit379119.student.utwente.nl> In-Reply-To: <200205310636250.SM02244@141.com> References: <200205310636250.SM02244@141.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--yNb1oOkm5a9FJOVX
Content-Type: multipart/mixed; boundary="8t9RHnE3ZwKMSgU+"
Content-Disposition: inline
--8t9RHnE3ZwKMSgU+
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
Hi,
I've checked out new sources around May 27, and tagging does nog work
for me on my IBM drive. It used to work before the MFC, but now
the tagging is disabled by the kernel and the ATA bus is reset.
Setting hw.ata.tags to "0" before booting the kernel works just fine.
The problem seems very similar to those reported before, and although
I know that my kernel doesn't include Soren's fix of May 31 (i.e. I'm
still using ata-disk.c v1.60.2.22), this change only seems to fix
situations in which both a tagging-capable and non tagging-capable
drive are on a controller, which is not the case in my system.
Working without tagging isn't much of a problem, so regard this
message as another "me too". Maybe the dmesg provides information to
fix the problem though.
TIA,
Niek
On Fri, May 31, 2002 at 08:34:52AM -0400, Andrew Lankford wrote:
> I recompiled my kernel just after Soren's last commit yesterday and=20
> enabled tags. Still had to mount root manually, though I'm not
> sure the latest change was directed at my problem.
>=20
> Andrew Lankford
>=20
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message
--=20
"Those who dream by day are cognizant of many things which escape those
who dream only by night."
Edgar Allan Poe
PGP public key at http://www.bergboer.net
--8t9RHnE3ZwKMSgU+
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: attachment; filename=dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RC #0: Wed May 29 16:33:20 CEST 2002
root@wit379119.student.utwente.nl:/usr/obj/usr/src/sys/WUTRA1
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6tm w/ multimedia extensions (233.22-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x561 Stepping = 1
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
AMD Features=0x400<<b10>>
real memory = 167772160 (163840K bytes)
config> di psm0
No such device: psm0
Invalid command or syntax. Type `?' for help.
config> di sn0
No such device: sn0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 159494144 (155756K bytes)
Preloaded elf kernel "kernel" at 0xc0396000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc039609c.
netsmb_dev: loaded
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00fda10
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0x5f00-0x5f0f at device 7.3 on pci0
pcm0: <AudioPCI ES1370> port 0x6800-0x683f irq 10 at device 9.0 on pci0
dc0: <Intel 21143 10/100BaseTX> port 0x6c00-0x6c7f mem 0xe0000000-0xe00003ff irq 12 at device 10.0 on pci0
dc0: Ethernet address: 00:80:48:b3:22:ee
miibus0: <MII bus> on dc0
amphy0: <Am79C873 10/100 media interface> on miibus0
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc1: <Intel 21143 10/100BaseTX> port 0x7000-0x707f mem 0xe0001000-0xe00013ff irq 11 at device 11.0 on pci0
dc1: Ethernet address: 00:80:48:b3:34:14
miibus1: <MII bus> on dc1
amphy1: <Am79C873 10/100 media interface> on miibus1
amphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc8000-0xcffff,0xd0000-0xd7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled
ad0: 9787MB <WDC WD102AA> [19885/16/63] at ata0-master UDMA33
ad2: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a
IPv6 packet filtering initialized, logging disabled
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x6400-0x641f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
arp: unknown hardware address format (0x0800)
arp: unknown hardware address format (0x0800)
arp: unknown hardware address format (0x0800)
dc0: TX underrun -- increasing TX threshold
arp: unknown hardware address format (0x0800)
arp: unknown hardware address format (0x0800)
--8t9RHnE3ZwKMSgU+
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: attachment; filename=ai
Master: ad0 <WDC WD102AA/05.05B05> ATA/ATAPI rev 4
Slave: no device present
Master: ad2 <IC35L040AVER07-0/ER4OA46A> ATA/ATAPI rev 5
Slave: no device present
--8t9RHnE3ZwKMSgU+--
--yNb1oOkm5a9FJOVX
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: PGP 6.5.8
iQA/AwUBPPsqT0aHjLdIjWxQEQLjrgCdFqX58/bZBVc0J7Le/5wqg3N9BjsAn017
3MHURUrFFG8hpgrwrgwle7t6
=FS1P
-----END PGP SIGNATURE-----
--yNb1oOkm5a9FJOVX--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020603103531.A8355>