Date: Tue, 11 Feb 2003 15:57:33 +0100 From: Walter Spierings <Walter@holoprint.com> To: jfm@blueyonder.co.uk Cc: questions@FreeBSD.ORG Subject: Re: XF86Config. Message-ID: <5.0.2.1.2.20030211155605.04bacbe0@pop.iae.nl>
next in thread | raw e-mail | index | archive | help
Hello Peter, Your modeline is far to fast, Try the one which has a 48Mhz bandwidth. (Look in the lint). Most smaller and older monitors just need low refresh. Find the modeline for 1024x768 and 60Hz refresh. Greetings, Walter Spierings At 02:59 PM 2/11/03 +0100, you wrote: >Thanks John, > >But unfortunately adjusting the vsync and hsync didn't make any difference. >I did have a working XF86Config under Linux (XFree86 4.2.0 )but I haven't >got a copy of that anymore , so it should be possible ! Just don't know >what the magic parameter is to add to or change in the X11 Config file. > >rgds, > >Peter > >John Murphy wrote: > >>Peter van Eck <pveck@bru-hub.dhl.com> wrote: >> >> >> >>>I'm still having toruble to get my X window system to run properly. >>>It loads the X server succesfull but the display is isshowing 3 Vertical >>>stripes thru the Desktop. >>>The frequencies seem OK , but it is like the desktop is split up in 3. >>>USing an HP Ultra VGA 15 inch Monitior + a S3 Trio32/64 videocard . >>>XFree86 4.2.0 >>> >>>Anyone a suggestion for me to check/change ? >>> >> >> >> >>>Section "Monitor" >>> Identifier "Monitor0" >>> HorizSync 30.0 - 86.0 >>> VertRefresh 50.0 - 130.0 >>>EndSection >>> >> >>I think your monitor would not be able to cope with those ranges. >>The HP Ultra VGA 17 seems to be limited to 30-64 Khz / 50-90 Hz. >>The 15 inch is probably the same. The effect you're seeing is >>probably the result of the Horiz. frequency being way too high. >> >>If reducing those ranges doesn't help, you could try it without >>the 3dfx accelerator card. >> >>John. >> > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.0.2.1.2.20030211155605.04bacbe0>