Date: Tue, 16 Sep 1997 23:27:12 -0700 From: Amancio Hasty <hasty@rah.star-gate.com> To: Luigi Rizzo <luigi@labinfo.iet.unipi.it> Cc: mark@grondar.za, multimedia@FreeBSD.ORG Subject: Re: GUS PnP and the new PnP code in 3.0 Message-ID: <199709170627.XAA19705@rah.star-gate.com> In-Reply-To: Your message of "Wed, 17 Sep 1997 06:44:09 %2B0200." <199709170444.GAA06825@labinfo.iet.unipi.it>
next in thread | previous in thread | raw e-mail | index | archive | help
Nope, This is what I have over here : controller snd0 device gus0 at isa? vector gusintr And this is the output of the sound driver: gus0 at 0x220 irq 11 drq 5 flags 0x107 on isa at 0x32c dma 7,5<Gravis PNP (1024k)> at 0x220 irq 11 dma 5,7 Mark, do you have a Plug & Play bios? Amancio >From The Desk Of Luigi Rizzo : > > Just leave out the pnp controller out for now. > > it should really do no harm, it will just let you override any PnP > setting but guspnp comes next and it can do anything it wants as > before. I believe his problem is in the config file: > > > > Probing for PnP devices: > > > CSN 1 Vendor ID: GRV0001 [0x0100561e] Serial 0x00000001 > > in fact, the above is just an informative message. Since you used > guspnp and not the new sound driver, there is no matching PnP device > driver, so the card is just ignored. > > > > gus0 at ? on isa > > > WARNING! GUS found at 220, config was ffffffff ERROR! Invalid IRQ#-1. GU S Di > > sabled > > ... > > > controller snd0 > > > device gus0 at isa? vector gusintr > > I believe you should put all the parameters for the Gus (port, irq, > drq) in the config file, as you did before. Not sure if you can > specify the parameters on the "device" line so that they match > those in the card . > > Luigi > -----------------------------+-------------------------------------- > Luigi Rizzo | Dip. di Ingegneria dell'Informazione > email: luigi@iet.unipi.it | Universita' di Pisa > tel: +39-50-568533 | via Diotisalvi 2, 56126 PISA (Italy) > fax: +39-50-568522 | http://www.iet.unipi.it/~luigi/ > _____________________________|______________________________________
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199709170627.XAA19705>