Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 07 Aug 2003 09:20:29 -0700
From:      "Kevin Oberman" <oberman@es.net>
To:        Joe Marcus Clarke <marcus@marcuscom.com>
Cc:        current@freebsd.org
Subject:   Re: ACPI battery state and resume not working on Inspiron 5150 
Message-ID:  <20030807162029.9CA025D08@ptavv.es.net>
In-Reply-To: Message from Joe Marcus Clarke <marcus@marcuscom.com>  of "Thu, 07 Aug 2003 12:06:30 EDT." <1060272390.721.0.camel@gyros> 

next in thread | previous in thread | raw e-mail | index | archive | help
> From: Joe Marcus Clarke <marcus@marcuscom.com>
> Date: Thu, 07 Aug 2003 12:06:30 -0400
> 
> 
> --=-IkHq9Jbph/9SXjiWOYnQ
> Content-Type: text/plain
> Content-Transfer-Encoding: quoted-printable
> 
> On Thu, 2003-08-07 at 10:31, Kevin Oberman wrote:
> > > From: Joe Marcus Clarke <marcus@marcuscom.com>
> > > Date: Wed, 06 Aug 2003 16:01:37 -0400
> > > Sender: owner-freebsd-current@freebsd.org
> > >=20
> > >=20
> > > --=3D-MHp9eSkqmbnyoWl+2a1w
> > > Content-Type: text/plain
> > > Content-Transfer-Encoding: quoted-printable
> > >=20
> > > On Wed, 2003-08-06 at 15:56, Barney Wolff wrote:
> > > > On Wed, Aug 06, 2003 at 03:31:01PM -0400, Joe Marcus Clarke wrote:
> > > > >     ACPI-1287: *** Error: Method execution failed
> > > > > [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc6137640), AE_NOT_EXIST
> > > >=3D20
> > > > I would not expect BAT1 to exist unless you have 2 batteries installe=
> d.
> > >=20
> > > Ah, good point.  However, I don't see any battery sysctls, and I do hav=
> e
> > > at least one battery installed.
> > >=20
> > > > As to resume, on my I5000 it takes almost a minute to come back from
> > > > S3, but does eventually come back on a -current from 7/30.
> > >=20
> > > Thanks for the suggestion.  I'll wait a bit longer.
> >=20
> > Well, I did some experimenting yesterday with the ACPI code on my IBM
> > T30 and learned one thing...if you plan on suspending, you need to set
> > a sleep delay. Before I set the delay I had some nasty problems
> > because power went away immediately and the disk cache did not have a
> > chance to flush (ouch!) and left the display where it should not be.
> >=20
> > I noticed that Windows XP has a delay of about 5 seconds. I set the
> > sysctl and tried again and things went MUCH better. The suspend didn't
> > leave the disk corrupt (whew!) and the display dropped to low
> > resolution before the graphics was shut down and switched back on
> > resume! My Radeon M7 even retained sync.
> >=20
> > Of course, the USB driver simply does not recover from a suspend on
> > ACPI and this should be fixed before too long. Also, the backlight
> > stays on making the suspend NVU (not very useful). But it is a huge
> > improvement and adding a delay MAY help a lot of other laptop
> > suspend/resume areas.=20
> >=20
> > Whether this will help th I5000 problems, I can't say, but it seems
> > like suspend/resume is the most common show-stopper for ACPI on
> > laptops, so it's worth a shot. If there is a trend that indicates that
> > a short delay in suspending fixes a number of problems, the default
> > delay should probably be modified from 0 to 4 or 5.
> 
> I tried your suggestion, but this just prolonged the inevitable for 5
> seconds.  The laptop still remained dead to all input and no video after
> resume.

Sorry, Joe. By the way, are you suspending with "acpiconf -s3"? Have
you tried creating a hibernation partition (slice) and using -s4? That
appears to work better than suspend on most platforms that support
it at all.
-- 
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: oberman@es.net			Phone: +1 510 486-8634



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030807162029.9CA025D08>