Date: Thu, 20 Sep 2007 01:54:58 -0700 From: Predrag Punosevac <punosevac@math.arizona.edu> To: Shantanoo Mahajan <shantanoo@gmail.com>, Beech Rintoul <beech@freebsd.org>, questions@freebsd.org, freebsd-multimedia@freebsd.org Subject: Re: Skype, Ekiga, and OSS Message-ID: <46F23562.5050900@math.arizona.edu> In-Reply-To: <46C37A1E.8080506@math.arizona.edu> References: <46C29C91.1050401@math.arizona.edu> <200708142255.34046.beech@freebsd.org> <46C2B6E3.70701@math.arizona.edu> <F6C3DE25-9132-491A-848F-9A4C84D73634@gmail.com> <46C37A1E.8080506@math.arizona.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Predrag Punosevac wrote: > Shantanoo Mahajan wrote: >> >> On 15-Aug-07, at 1:48 PM, Predrag Punosevac wrote: >> >>> Beech Rintoul wrote: >>>> On Tuesday 14 August 2007, Predrag Punosevac said: >>>> >>>>> I was wondering if anybody is using successfully Skype or Ekiga >>>>> (any other SIP phone) via the Open Sound System compiled from >>>>> ports? Would you mind sharing your devfs.conf file and rc.conf >>>>> file? >>>>> >>>>> Thank you >>>>> Predrag >>>>> >>>> >>>> net/skype in the ports works out of the box. No special configs >>>> needed. net/skype-devel is a work in progress and is currently broken. >>>> >>>> Beech >>>> >>>> >>>> >>> Maybe with build in OSS but not with OSS compiled from ports. In >>> particular, how do I set up microphone. I can hear the test call but >>> my voice is not recorded. >> >> You may try following command: >> >> $ mixer igain 90 rec 90 mic 90 >> >> regards, >> shantanoo >> _______________________________________________ >> freebsd-questions@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >> To unsubscribe, send any mail to >> "freebsd-questions-unsubscribe@freebsd.org" > OK, > I am sure it is a mixer problem. I tried your advice this is the result > [pedja@ /usr/home/Pedja]$ mixer > Mixer pcm is currently set to 45:45 > Recording source: > > > [pedja@ /usr/home/Pedja]$ mixer igain 90 rec 90 mic 90 > mixer: unknown device: igain > usage: mixer [-f device] [-s | -S] [dev [+|-][voll[:[+|-]volr]] ... > mixer [-f device] [-s | -S] recsrc ... > mixer [-f device] [-s | -S] {^|+|-|=}rec rdev ... > devices: pcm > rec devices: > > I tried as a supper user too. It makes no difference. > > But the following outputs are interesting > [pedja@ /usr/home/Pedja]$ ossinfo > Version info: OSS 4.0 (build 070707/200708012238/C (0x00040002) > Platform: FreeBSD/i386 6.2-STABLE-200706 FreeBSD 6.2-STABLE-200706 #0: > Sun Jun 3 14:20:02 UTC 2007 > root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP > > Number of audio devices: 9 > Number of audio engines: 9 > Number of MIDI devices: 0 > Number of mixer devices: 1 > > > Device objects > 0: audigyls0 AudigyLS > 1: vmix0 OSS transparent virtual support > > MIDI devices (/dev/midi*) > > Mixer devices (/dev/mixer*) > 0: AudigyLS Mixer (Mixer 0 of device object 0) > > Audio devices > /dev/oss/audigyls0/pcm0 AudigyLS front (device index 0) > /dev/oss/audigyls0/pcm1 AudigyLS (shadow) (device index 1) > /dev/oss/audigyls0/pcm2 AudigyLS center/lfe (device index 2) > /dev/oss/audigyls0/pcm3 AudigyLS surround (device index 3) > /dev/oss/audigyls0/pcm4 AudigyLS 5.1 output (device index 4) > /dev/oss/vmix0/pcm0 AudigyLS front (VMIX0) (device index 5) > /dev/oss/vmix0/pcm1 AudigyLS front (VMIX0) (device index 6) > /dev/oss/vmix0/pcm2 AudigyLS front (VMIX0) (device index 7) > /dev/oss/vmix0/pcm3 AudigyLS front (VMIX0) (device index 8) > > Note that number of mixer devices is zero. > > [pedja@ /usr/home/Pedja]$ ossmix > Selected mixer 0/ > Known controls are: > pcm <both/leftvol>[:<rightvol>] (currently 45:45) > rear <both/leftvol>[:<rightvol>] (currently 48:48) > rear.rec ON|OFF (currently OFF) > center <both/leftvol>[:<rightvol>] (currently 48:48) > center.rec ON|OFF (currently OFF) > ext.spread ON|OFF (currently OFF) > ext.loopback ON|OFF (currently OFF) > ext.recordvol <monovol> (currently 128) > ext.recordsrc <MIC|LINE> (currently MIC) > vmix0-src <Fast|Low|Medium|High|High+|Production|OFF> > (currently Fast) > vmix0-vol <monovol> (currently 25.0 dB) > vmix0-out <leftVU>:<rightVU>] (currently 0:0) > vmix0-out.pcm5 <monovol> (currently 25.0 dB) > vmix0-out <leftVU>:<rightVU>] (currently 0:0) > vmix0-out.pcm6 <monovol> (currently 25.0 dB) > vmix0-out <leftVU>:<rightVU>] (currently 0:0) > vmix0-out.pcm7 <monovol> (currently 25.0 dB) > vmix0-out <leftVU>:<rightVU>] (currently 0:0) > vmix0-out.pcm8 <monovol> (currently 25.0 dB) > vmix0-out <leftVU>:<rightVU>] (currently 0:0) > vmix0-in <leftVU>:<rightVU>] (currently 0:0) > > The native mixer is enabled in the rc.conf file > > Could you give me some kind of hint any suggestions? What should I > read? Documentation? > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" Just as a follow up on my earlier problems with Skype. I was rebuilding my userland over the weekend due to the XOrg 7.3 update. By accident I updated also OSS port. My skype now works flawlessly. I found out that there was a mixer bug for the AudigySE card (I thought something was wrong with my oss mixer of course since the built in oss ROCKS but I am not using it) By the way developers did spectacular job with XOrg 7.3. Everything went smoothly. Sincerely, Predrag Punosevac
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46F23562.5050900>