Date: Thu, 22 Jun 2000 09:58:38 +0200 (CEST) From: Rasmus Skaarup <rasmus@gal.dk> To: freebsd-alpha@freebsd.org Subject: Problems installing FreeBSD 4.0-RELEASE on an Alpha system Message-ID: <Pine.BSF.4.21.0006220955420.74817-100000@skaarup.org>
next in thread | raw e-mail | index | archive | help
Hi, I'm not sure where to post this, I tried freebsd-questions, but didn't get any responses. When trying to boot the system, with to to installation floppies, it enters an infinite loop with the following output: ** snip snip ** atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd0: interrupting at ISA irq 1 mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A, console sio0: interrupting at ISA irq 4 sio1: reserved for low-level i/o sym0:0: ERROR (81:0) (0-0-0) (0/7) @ (script 140:00000000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 40 07 47 00 00 0f 00 08 00 00 80 00 08 0a 00 40 1e bf 20 ff ff ff. (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (81:0) (0-0-0) (0/7) @ (script 140:00000000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 40 07 47 00 00 0f 00 08 00 00 80 00 08 0a 00 40 1e bf 20 ff ff ff. (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (81:0) (0-0-0) (0/7) @ (script 140:00000000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 40 07 47 00 00 0f 00 08 00 00 80 00 08 0a 00 40 1e bf 20 ff ff ff. ** snip snip ** It's the to latter sections (starting with "(no periph..") that keeps repeating itself forever. Can someone help me to solve this problem? Is it a hardware detection problem? What is a 'sym0' device? Thank you. Best regards Rasmus To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0006220955420.74817-100000>