Date: Fri, 17 May 2002 14:38:03 +0400 From: Alex Deiter <tiamat@komi.mts.ru> To: freebsd-sparc@FreeBSD.ORG Subject: Netra T1 panic on gem0 Message-ID: <3821411247.20020517143803@komi.mts.ru>
next in thread | raw e-mail | index | archive | help
Hello, I try run http://people.freebsd.org/~jake/sparc64/distrib-20020513.tar.bz2 Netra T1 200 (UltraSPARC-IIe 500MHz), No Keyboard OpenBoot 4.0, 512 MB memory installed, Serial #51589233. Ethernet address 0:3:ba:13:30:71, Host ID: 83133071. Boot device: net File and args: 21a00 Console: OpenFirmware console FreeBSD/sparc64 loader bootpath="/pci@1f,0/pci@1,1/network@c,1" loaddev=net0: boot: ethernet address: 00:03:ba:13:30:71 net_open: server addr: 10.50.1.1 net_open: server path: /home/FreeBSD/sparc64/distrib net_open: boot file: kernel > \ \: unknown command /boot/kernel/kernel data=0x2e2308+0xebc78 syms=[0x8+0x43758+0x8+0x35118] Hit [Enter] to boot immediately, or any other key for command prompt. Type '?' for a list of commands, 'help' for more detailed help. OK boot -v nothing to autoload yet. jumping to kernel entry at 0x80038000. Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #1: Tue May 14 15:35:39 GMT 2002 jake@u60.locore.ca:/usr/p4/sparc64/sys/sparc64/compile/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0x8044a000. Timecounter "tick" frequency 500000000 Hz cpu0: Sun Microsystems UltraSparc-IIe Processor (500.00 MHZ CPU) mask=0x14 maxtl=5 maxwin=7 null: <null device, zero device> random: <entropy source> mem: <memory & I/O> nexus0: <OpenFirmware Nexus device> pcib0: <U2P UPA-PCI bridge> on nexus0 pcib0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0 DVMA map: 0xc0000000 to 0xdfffffff pcib0: ofw_pci_init_intr: descending to subordinate PCI bus pcib0: ofw_pci_init_intr: no interrupt mapping found for 1/12/0 (preset 0) pcib0: ofw_pci_init_intr: no interrupt mapping found for 1/3/0 (preset 0) pcib0: ofw_pci_init_intr: no interrupt mapping found for 1/3/0 (preset 0) pcib0: ofw_pci_init_intr: no interrupt mapping found for 1/7/0 (preset 0) pcib0: ofw_pci_init_intr: mapping intr for 1/12/1 to 6 (preset was 0) pcib0: ofw_pci_init_intr: mapping intr for 1/12/3 to 36 (preset was 0) pcib0: ofw_pci_init_intr: mapping intr for 1/13/0 to 12 (preset was 0) pcib0: ofw_pci_init_intr: mapping intr for 1/5/1 to 28 (preset was 0) pcib0: ofw_pci_init_intr: mapping intr for 1/5/3 to 38 (preset was 0) pcib0: ofw_pci_init_intr: descending to subordinate PCI bus pcib0: ofw_pci_init_intr: mapping intr for 2/8/0 to 32 (preset was 0) pcib0: ofw_pci_init_intr: mapping intr for 2/8/1 to 32 (preset was 0) pci0: physical bus=0 found-> vendor=0x108e, dev=0x5000, revid=0x13 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 found-> vendor=0x108e, dev=0x5000, revid=0x13 bus=0, slot=1, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 pci0: <PCI bus> on pcib0 pcib1: <APB PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 2 pcib1: subordinate bus 255 pcib1: I/O decode 0xc00000-0xdfffff, 0xe00000-0xffffff pcib1: memory decode 0x0-0x1fffffff, 0x20000000-0x3fffffff, 0x40000000-0x5 fffffff, 0x60000000-0x7fffffff, 0x80000000-0x9fffffff, 0xa0000000-0xbfffffff pci1: physical bus=2 map[10]: type 4, range 32, base 00c00000, size 8, port disabled map[14]: type 1, range 64, base 00002000, size 10, enabled map[1c]: type 1, range 64, base 00004000, size 13, enabled found-> vendor=0x1000, dev=0x000b, revid=0x07 bus=2, slot=8, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 intpin=a, irq=32 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00c00100, size 8, port disabled map[14]: type 1, range 64, base 00006000, size 10, enabled map[1c]: type 1, range 64, base 00008000, size 13, enabled found-> vendor=0x1000, dev=0x000b, revid=0x07 bus=2, slot=8, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 intpin=a, irq=32 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <PCI bus> on pcib1 sym0: <896> port 0xc00000-0xc000ff mem 0x4000-0x5fff,0x2000-0x23ff irq 32 at dev ice 8.0 on pci1 pcib1: device sym0 requested decoded memory range 0x2000-0x23ff pcib1: device sym0 requested decoded memory range 0x4000-0x5fff sym0: chip clock is 40218KHz sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym1: <896> port 0xc00100-0xc001ff mem 0x8000-0x9fff,0x6000-0x63ff irq 32 at dev ice 8.1 on pci1 pcib1: device sym1 requested decoded memory range 0x6000-0x63ff pcib1: device sym1 requested decoded memory range 0x8000-0x9fff sym1: chip clock is 40218KHz sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: handling phase mismatch from SCRIPTS. pcib2: <APB PCI-PCI bridge> at device 1.1 on pci0 pcib2: secondary bus 1 pcib2: subordinate bus 1 pcib2: I/O decode 0x0-0x1fffff, 0x200000-0x3fffff, 0x400000-0x5fffff, 0 x600000-0x7fffff, 0x800000-0x9fffff, 0xa00000-0xbfffff pcib2: memory decode 0xe0000000-0xffffffff pci2: physical bus=1 found-> vendor=0x10b9, dev=0x7101, revid=0x00 bus=1, slot=3, func=0 class=00-00-00, hdrtype=0x00, mfdev=0 found-> vendor=0x10b9, dev=0x1533, revid=0x00 bus=1, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=0 powerspec 1 supports D0 D3 current D0 map[10]: type 1, range 32, base f0000000, size 24, enabled map[14]: type 1, range 32, base f1000000, size 23, enabled found-> vendor=0x108e, dev=0x1100, revid=0x01 bus=1, slot=12, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 map[10]: type 1, range 32, base e0400000, size 17, enabled found-> vendor=0x108e, dev=0x1101, revid=0x01 bus=1, slot=12, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 intpin=a, irq=6 map[10]: type 1, range 32, base e2000000, size 15, memory disabled found-> vendor=0x108e, dev=0x1103, revid=0x01 bus=1, slot=12, func=3 class=0c-03-10, hdrtype=0x00, mfdev=1 intpin=a, irq=36 map[10]: type 4, range 32, base 00000400, size 3, port disabled map[14]: type 4, range 32, base 00000418, size 2, enabled map[18]: type 4, range 32, base 00000410, size 3, enabled map[1c]: type 4, range 32, base 00000408, size 2, enabled map[20]: type 4, range 32, base 00000420, size 4, enabled found-> vendor=0x10b9, dev=0x5229, revid=0xc3 bus=1, slot=13, func=0 class=01-01-ff, hdrtype=0x00, mfdev=0 intpin=a, irq=12 powerspec 2 supports D0 D3 current D0 pci2: <PCI bus> on pcib2 pci2: <old, non-VGA display device> at device 3.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci2 isa0: <ISA bus> on isab0 ebus0: revision 0x01 ebus0: <idprom>: incomplete ebus0: <PCI-EBus3 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at dev ice 12.0 on pci2 ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached) eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0 pcib2: device eeprom0 requested decoded memory range 0xf1000000-0xf1001fff eeprom0: model mk48t59 eeprom0: registered as a time-of-day clock (resolution 1000000us) eeprom0: hostid 83133071 eeprom0: current time: 1021630775.000000000 ebus0: <SUNW,lomh> addr 0x1400200000-0x1400200003 irq 42 (no driver attached) gem0: <Sun ERI 10/100 Ethernet Adaptor> mem 0xe0400000-0xe041ffff irq 6 at devic e 12.1 on pci2 pcib2: device gem0 requestIOMMU fault virtual address 0xdf000000 panic: pcib: uncorrectable DMA error AFAR 0x586000 AFSR 0x270000ff00000000 cpuid = 0; Debugger("panic") Stopped at Debugger+0x1c: ta %xcc, 1 db> -- Best regards, Alex mailto:tiamat@komi.mts.ru To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-sparc" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3821411247.20020517143803>