Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 22 Nov 2000 14:50:40 -0800
From:      Philippe Le Berre <philippe@le-berre.com>
To:        freebsd-stable@freebsd.org
Subject:   Error in wait while rm -f .depend at various buildworld stage ?
Message-ID:  <5.0.1.4.0.20001122142036.0195b008@puccini.grenoble.hp.com>

next in thread | raw e-mail | index | archive | help
Hi,

I have this box with 4.1.1-Release running (see at the end for the dmesg). 
I have cvsupped stable, and went on to buildworld, alas it's failing in way 
that puzzled me. I am thinking of a possible h/w (tyan motherboard: Thunder 
LE S2510 + IBM hd + 1GB) issue but I would appreciate others 
point-of-views. I have cvsupped at the same time on another system which is 
running 4.1.1-Stable and it works fine.

So, the buildworld always fails on error in wait: -1 while the last command 
is a rm -f .depend. I have tried several make clean then make buildworld 
and the error appears at different place/time of the build process. Any 
thought, advice would be welcomed.

Thanks

-philippe

Here's one example:

----->>-------------------->>---------------
rs.ru/koi2alt/GTAGS
===> usr.sbin/lpr/filters.ru/koi2855
rm -f .depend /usr/src/usr.sbin/lpr/filters.ru/koi2855/GPATH 
/usr/src/usr.sbin/lpr/filters.r
u/koi2855/GRTAGS  /usr/src/usr.sbin/lpr/filters.ru/koi2855/GSYMS 
/usr/src/usr.sbin/lpr/filte
rs.ru/koi2855/GTAGS
===> usr.sbin/lpr/filters.ru/koi2alt
rm -f koi2alt koi2alt.o
rm -f .depend /usr/src/usr.sbin/lpr/filters.ru/koi2alt/GPATH 
/usr/src/usr.sbin/lpr/filters.r
u/koi2alt/GRTAGS  /usr/src/usr.sbin/lpr/filters.ru/koi2alt/GSYMS 
/usr/src/usr.sbin/lpr/filte
rs.ru/koi2alt/GTAGS
===> usr.sbin/lpr/filters.ru/koi2855
rm -f koi2855 koi2855.o
rm -f .depend /usr/src/usr.sbin/lpr/filters.ru/koi2855/GPATH 
/usr/src/usr.sbin/lpr/filters.r
u/koi2855/GRTAGS  /usr/src/usr.sbin/lpr/filters.ru/koi2855/GSYMS 
/usr/src/usr.sbin/lpr/filte
rs.ru/koi2855/GTAGS
error in wait: -1
*** Error code 2

Stop in /usr/src/usr.sbin/lpr/filters.ru.
*** Error code 1

Stop in /usr/src/usr.sbin/lpr.
*** Error code 1

Stop in /usr/src/usr.sbin.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.
 >>-------------------->>---------------------------------

dmesg
-------------------->>------------>>----------------------
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
          The Regents of the University of California. All rights reserved.
FreeBSD 4.1.1-RELEASE #0: Tue Sep 26 00:46:59 GMT 2000
     jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (797.48-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
   Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36
,PN,MMX,FXSR,XMM>
real memory  = 1073741824 (1048576K bytes)
avail memory = 1041694720 (1017280K bytes)
Preloaded elf kernel "kernel" at 0xc0416000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <RCC LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 1.0 irq 11
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem 
0xfe900000-0xfe9fffff,0xfeafe
000-0xfeafefff irq 9 at device 4.0 on pci0
fxp0: Ethernet address 00:e0:81:01:3f:51
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xd000-0xd03f mem 
0xfe700000-0xfe7fffff,0xfeafd
000-0xfeafdfff irq 5 at device 5.0 on pci0
fxp1: Ethernet address 00:e0:81:01:3f:52
isab0: <PCI to ISA bridge (vendor=1166 device=0200)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port 0xffa0-0xffaf at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfeafc000-0xfeafcfff irq 10 at 
device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <RCC LE host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
sym0: <1010-33> port 0xe400-0xe4ff mem 
0xfebd8000-0xfebd9fff,0xfebe0000-0xfebe03ff irq 7 at
device 6.0 on pci1
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym1: <1010-33> port 0xe800-0xe8ff mem 
0xfebf0000-0xfebf1fff,0xfebf8000-0xfebf83ff irq 10 at
  device 6.1 on pci1
sym1: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
acd0: CDROM <MATSHITA CR-175> at ata1-slave using PIO4
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
Mounting root from ufs:/dev/da0s1a
da0 at sym0 bus 0 target 1 lun 0
da0: <IBM DDYS-T18350N S93E> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged Queueing 
Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.0.1.4.0.20001122142036.0195b008>