Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 11 Jun 2010 14:58:27 +0200
From:      Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no>
To:        freebsd-multimedia@FreeBSD.org
Subject:   Re: usleep's pvrxxx  port and FreeBSD 8.0-stable
Message-ID:  <20100611145827.105d821b.torfinn.ingolfsen@broadpark.no>
In-Reply-To: <1274785448.70783.TMDA@ncolin.muc.de>
References:  <201005212042.42604.shoesoft@gmx.net> <20100521165407.5a7da822.torfinn.ingolfsen@broadpark.no> <20100522130442.7dd0c114.torfinn.ingolfsen@broadpark.no> <20100520215645.0f506ba7.torfinn.ingolfsen@broadpark.no> <20100521105145.56bcd718.torfinn.ingolfsen@broadpark.no> <20100522145858.fe653d29.torfinn.ingolfsen@broadpark.no> <20100522143931.23418.qmail@ncolin.muc.de> <20100524124936.a88dfbf5.torfinn.ingolfsen@broadpark.no> <1274785448.70783.TMDA@ncolin.muc.de>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 25 May 2010 13:04:07 +0200
Armin Gruner <ag-usenet@muc.de> wrote:

> Ops, sorry for that! I must have fooled me when bundling the patchsets together.
> 
> I've just checked that both build & kldload works for the updated port dir:
> 
>     http://www.muc.de/~ag/pvrxxx-20080409_1.tgz
> 
> Could you retry with this one?

Finally found time to test that one. Yes, the one referenced above
compiles and install without trouble here.

> About your previous posting:
> 
> > Update:
> > Ok, I have tested the port with mplayer, and it works (at least for
> > video, for some reason my quick test didn't have any audio. Might be a
> > problem with mplayer).
> 
> Did you set the tuner input explicit? (read: pvr250-setchannel -t)

Yes, I did (I always do).

> After boot/kldload, the audio output defaults to the rear connector
> and not the mpeg stream..

Good to know.
-- 
Regards,
Torfinn Ingolfsen




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100611145827.105d821b.torfinn.ingolfsen>