Date: Sat, 26 Apr 2003 12:14:59 -0400 From: "Sid Lambert" <sidlambert@adelphia.net> To: "Marc Fonvieille" <blackend@freebsd.org> Cc: freebsd-hardware@freebsd.org Subject: Re: Fw: Asus P4PE Message-ID: <001601c30c0e$fc0a6140$6400a8c0@sid> References: <00c401c30b23$9c62fe00$6400a8c0@sid> <20030426083413.GA540@nosferatu.blackend.org>
next in thread | previous in thread | raw e-mail | index | archive | help
That is what I thought also after reading if_bge.c, but the device is not detected. Here is some information I gathered. <root@rack:/home/azoos> dmesg | grep "irq 10" pci2: <unknown card> (vendor=0x14e4, dev=0x4401) at 5.0 irq 10 <root@rack:/home/azoos> pciconf -l | grep none none0@pci2:5:0: class=0x020000 card=0x80a81043 chip=0x440114e4 rev=0x01 hdr=0x00 I get the same from GENERIC 4.8 as well as custom 4.8 kernels. Any other suggestions? Sid ----- Original Message ----- From: "Marc Fonvieille" <blackend@freebsd.org> To: "Sid Lambert" <sidlambert@adelphia.net> Cc: <freebsd-hardware@freebsd.org> Sent: Saturday, April 26, 2003 4:34 AM Subject: Re: Fw: Asus P4PE > On Fri, Apr 25, 2003 at 08:10:07AM -0400, Sid Lambert wrote: > > Is the Promise ATA RAID onboard PDC20376 chipset supported in 4.x? And > > what > > about the Broadcom BCM5702 onboard NIC? I glanced around the source and > > website but do not see the appropriate driver for either device. > > > > Hi Sid, > > For the BCM5702 you should look at bge(4) manual page. > > Marc >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001601c30c0e$fc0a6140$6400a8c0>