Date: Tue, 19 May 1998 16:12:56 -0500 (EST) From: "Richard J. Kuhns" <rjk@grauel.com> To: stable@FreeBSD.ORG Subject: panic: root dev has no bdevsw Message-ID: <13665.62936.648794.309002@sawmill.grauel.com>
next in thread | raw e-mail | index | archive | help
If I missed a "heads up" in -stable, I'm sorry, but I can't find anything
relating to this in the mailing list archives for either -questions or
-stable, at least not by searching for `bdevsw'.
I just (about 9:30AM EST) cvsuped the latest -stable bits and made world;
no problems at all. I then compiled and installed a new kernel which
panics immediatley after the device probes (where it should say `changing
root device to...') with `panic: root dev has no bdevsw'.
I also just tried updating the boot blocks. The files in /usr/mdec were
rebuilt today and I did a `disklabel -B sd0'; it made no difference.
I'll include the boot messages for the previous kernel (which I've saved)
below; if any other info in needed, I'll be happy to supply it.
My root device is listed in /etc/fstab as /dev/sd0s1a.
Help?
========
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.6-STABLE #0: Fri Mar 27 09:27:22 EST 1998
rjk@adler.grauel.com:/usr/src/sys/compile/ADLER
CPU: Pentium (132.63-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52b Stepping=11
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
avail memory = 31043584 (30316K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82437FX PCI cache memory controller> rev 2 on pci0:0:0
chip1 <Intel 82371FB PCI-ISA bridge> rev 2 on pci0:7:0
chip2 <Intel 82371FB IDE interface> rev 2 on pci0:7:1
vga0 <VGA-compatible display device> rev 84 int a irq 10 on pci0:11:0
ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:12:0
ahc0: aic7880 Single Channel, SCSI Id=7, 16/255 SCBs
ahc0 waiting for scsi devices to settle
ahc0: target 0 Tagged Queuing Device
(ahc0:0:0): "SEAGATE ST32550N 0021" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 2047MB (4194058 512 byte sectors)
(ahc0:2:0): "NEC CD-ROM DRIVE:222 3.1k" type 5 removable SCSI 2
cd0(ahc0:2:0): CD-ROM can't get the size
(ahc0:6:0): "ARCHIVE ANCDA 2750 28077 -002" type 1 removable SCSI 2
st0(ahc0:6:0): Sequential-Access density code 0x0, drive empty
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 5 maddr 0xd8000 msize 16384 on isa
ed0: address 00:00:c0:c6:92:d6, type SMC8216/SMC8216C (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
changing root device to st0s1a
Intel Pentium F00F detected, installing workaround
--
Richard Kuhns rjk@grauel.com
PO Box 6249 Tel: (765)477-6000 \
100 Sawmill Road x319
Lafayette, IN 47903 (800)489-4891 /
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?13665.62936.648794.309002>