Date: Fri, 11 Jan 2002 07:47:00 +0100 From: Thomas Seck <tmseck@netcologne.de> To: freebsd-qa@freebsd.org Subject: Re: New cdboot ISO available Message-ID: <20020111064700.GA474@laurel.seck.home> In-Reply-To: <200201102254.g0AMsrQ06804@bmah.dyndns.org> References: <XFMail.020110015947.jhb@FreeBSD.org> <20020110224026.GA239@laurel.seck.home> <200201102254.g0AMsrQ06804@bmah.dyndns.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--M9NhX3UHpAaciwkO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
# Bruce A. Mah (bmah@FreeBSD.ORG):
> If memory serves me right, Thomas Seck wrote:
> > # John Baldwin (jhb@FreeBSD.ORG):
> >
> > > Please test this ISO and provide feedback to the -stable or -qa lists
> > > thanks.
> >
> > I could successfully boot the image on a P133 and a Celeron 400.
> >
> > I will do some installation testing on a Duron 800 system tomorrow at
> > work.
>
> Whether the image boots or not is less a function of what processor you
> have in a machine and more a function of the motherboard and BIOS (maybe
> disk controller?). For some well-known vendors, it's meaningful to say
> what model a machine is. Still it's good to see you're having some
> success...thanks for reporting it.
Sorry, 't was too late that evening.
The P133 is a 430FX system with a Gigabyte GA586 Mainboard, the Celeron
sits on a Gigabyte BX2000 board. Both systems are IDE based, PIIX3 and
PIIX4 respectively.
dmesg are attached, for the curious.
--Thomas
--M9NhX3UHpAaciwkO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.laurel"
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-PRERELEASE #1: Fri Dec 28 19:15:47 CET 2001
tmseck@hardy.seck.home:/usr/obj/usr/src/sys/LAUREL
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 133637119 Hz
CPU: Pentium/P54C (133.64-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67108864 (65536K bytes)
avail memory = 61956096 (60504K bytes)
Preloaded elf kernel "kernel" at 0xc0351000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Matrox MGA 1024SG/1064SG/1164SG graphics accelerator> at 9.0 irq 11
rl0: <RealTek 8139 10/100BaseTX> port 0x6100-0x61ff mem 0xe1004000-0xe10040ff irq 10 at device 10.0 on pci0
rl0: Ethernet address: 00:48:54:3d:5d:cf
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: <RealTek 8139 10/100BaseTX> port 0x6200-0x62ff mem 0xe1005000-0xe10050ff irq 9 at device 11.0 on pci0
rl1: Ethernet address: 00:06:7b:00:a7:7b
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 drq 1 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sbc1: <Creative ViBRA16C> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 5 drq 3,5 on isa0
pcm0: <SB16 DSP 4.13> on sbc1
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, unlimited logging
ad0: 2756MB <IBM-DCAA-32880> [5600/16/63] at ata0-master WDMA2
ata1-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad2: 4125MB <FUJITSU MPD3043AT> [8940/15/63] at ata1-master WDMA2
acd0: CD-RW <4X4X32> at ata1-slave using WDMA2
Mounting root from ufs:/dev/ad0s1a
WARNING: driver Coda should register devices with make_dev() (dev_t = "#Coda/0")
--M9NhX3UHpAaciwkO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.hardy"
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-PRERELEASE #2: Mon Dec 31 12:05:14 CET 2001
tmseck@hardy.seck.home:/usr/obj/usr/src/sys/HARDY
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 399923411 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (399.92-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 402587648 (393152K bytes)
avail memory = 388456448 (379352K bytes)
Preloaded elf kernel "kernel" at 0xc033b000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdd70
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xe0000000-0xe00000ff irq 10 at device 10.0 on pci0
rl0: Ethernet address: 00:48:54:3d:60:ce
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <AudioPCI ES1373-B> port 0xe800-0xe83f irq 5 at device 11.0 on pci0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 drq 1 flags 0x3f on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in ECP+EPP mode (EPP 1.7)
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, unlimited logging
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: 12416MB <QUANTUM FIREBALL CR13.0A> [25228/16/63] at ata0-master UDMA33
ad2: 19541MB <Maxtor 92041U4> [39703/16/63] at ata1-master UDMA33
acd0: CDROM <NEC CD-ROM DRIVE:282> at ata0-slave using UDMA33
Mounting root from ufs:/dev/ad0s1a
--M9NhX3UHpAaciwkO--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-qa" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020111064700.GA474>