Date: Tue, 10 Feb 1998 21:45:12 -0400 (AST) From: The Hermit Hacker <scrappy@hub.org> To: freebsd-multimedia@FreeBSD.ORG Cc: freebsd-current@FreeBSD.ORG Subject: Soundblaster 16 4.16 configuration Message-ID: <Pine.BSF.3.96.980210213454.249A-100000@thelab.hub.org>
next in thread | raw e-mail | index | archive | help
Evening... A friend and I just spent the past several hours going through the mailing lists at www.freebsd.org, newsgroups and whatever README files we could find, and can't seem to get this thing to work...so now I ask here. I just picked up a Soundblaster card for my machine, and altho I think its configured correctly, and FreeBSD appears to recognize it, I can't appear to do anything with it. dmesg shows: Probing for devices on PCI bus 0: chip0: <Intel 82439> rev 0x03 on pci0.0.0 chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0 ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1 vga0: <ATI Mach64-GX graphics accelerator> rev 0x00 on pci0.12.0 Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2 at 0x3e8-0x3ef irq 5 on isa sio2: type 16550A lpt0 not found fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <QUANTUM FIREBALL_TM2110A> wd0: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S wdc0: unit 1 (atapi): <ACER CD-910E/JAS/13N>, removable, dma, iordy wcd0: 687Kb/sec, 240Kb cache, audio play, 2 volume levels, ejectable tray wcd0: 120mm data disc loaded, unlocked npx0 on motherboard npx0: INT 16 interface sb0 at 0x220 irq 10 drq 1 on isa snd0: <SoundBlaster 16 4.16> sbxvi0 at ? drq 6 on isa snd0: <SoundBlaster 16 4.16> opl0 at 0x388 on isa snd0: <Yamaha OPL3 FM> Intel Pentium F00F detected, installing workaround But, if I try to use something like 'splay' to play an mp3 file, I get: Sound: DMA (output) timed out - IRQ/DRQ config error? My first "concern" is that the sbxvi0 line above shows "at ? ..", which I don't know if its important or not... My kernel config looks like: machine "i386" cpu "I586_CPU" ident thelab maxusers 32 options USER_LDT options SYSVSHM options SYSVSEM options SYSVMSG options "CD9660" #ISO 9660 Filesystem options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options INET #InterNETworking options FFS #Berkeley Fast Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options KTRACE options "AUTO_EOI_1" config kernel root on wd0 controller isa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr device npx0 at isa? port "IO_NPX" irq 13 vector npxintr device sio0 at isa? port "IO_COM1" tty flags 0x10 irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr # Controls all sound devices controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device awe0 at isa? port 0x620 device opl0 at isa? port 0x388 device mpu0 at isa? port 0x330 irq 6 drq 0 pseudo-device loop pseudo-device ether pseudo-device tun 1 pseudo-device pty 16 pseudo-device bpfilter 1 #Berkeley packet filter And, I sent through the 'kernel -c' interface to change sb0 to irq 10 instead of 5, because of the conflict with sio2 ... Is there something really simple I'm missing here? The kernel source is from ~Jan20, 1998... My friend, having more experience with Linux, asked if we had a pnpprobe utility...something that would list all the irq's and such being used...do we have something like that? Thanks for any help... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980210213454.249A-100000>