Date: Mon, 21 Mar 2005 20:29:53 -0000 From: "G.A.Grjetarsson" <gestur@svaka.net> To: <questions@freebsd.org> Subject: support problem FreeBSD 5.3 on x346_8840_2AG Message-ID: <200503212029.j2LKTq7x054743@mx1.svaka.net>
next in thread | raw e-mail | index | archive | help
Hi
I was setting up FreeBSD on IBM x346 box, but have problems getting all
hardware to work
The server config is:
IBM x346
Adaptek HostRaid controller
2 * Broadcomm NetXtreme 1Gig ethernet
On the HostRaid controller I setup raid1 with 3 hdd's but the freebsd
doesnt' see the logical partition it only sees the physical disks to work
with...
The FreeBSD also doesn't recognize the NetXtreme ethernet's
Can someone help me out in this
This is the dmesg info from the server from the last boot:
root@dimon.svaka.net:/var/log>more dmesg.yesterday
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Fri Mar 18 19:03:11 UTC 2005
root@:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <IBM SERONYXP>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3200.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf34 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2147274752 (2047 MB)
avail memory = 2095804416 (1998 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic4 <Version 2.0> irqs 96-119 on motherboard
ioapic3 <Version 2.0> irqs 72-95 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM SERONYXP> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x588-0x58b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.PCI1 -
AE_NOT_F
OUND
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2
pci4: <ACPI PCI bus> on pcib3
rl0: <RealTek 8139 10/100BaseTX> port 0x4000-0x40ff mem
0xcffffc00-0xcffffcff ir
q 96 at device 4.0 on pci4
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:11:3b:01:33:ef
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pcib4: could not get PCI interrupt routing table for \\_SB_.PCI0.PCI4 -
AE_NOT_F
OUND
pci5: <ACPI PCI bus> on pcib4
pci5: <network, ethernet> at device 0.0 (no driver attached)
pcib5: <PCI-PCI bridge> at device 5.0 on pci0
pci6: <PCI bus> on pcib5
pci6: <network, ethernet> at device 0.0 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib6: could not get PCI interrupt routing table for \\_SB_.PCI0.PCI5 -
AE_NOT_F
OUND
pci7: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pci8: <ACPI PCI bus> on pcib7
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port
0x5100-0x51ff,0x5000-0x50ff m
em 0xc9ffe000-0xc9ffffff irq 27 at device 7.0 on pci8
ahd0: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port
0x5300-0x53ff,0x5200-0x52ff m
em 0xc9ffc000-0xc9ffdfff irq 24 at device 7.1 on pci8
ahd1: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
pcib8: <ACPI PCI-PCI bridge> at device 0.2 on pci7
pci9: <ACPI PCI bus> on pcib8
pci0: <base peripheral> at device 8.0 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x2200-0x221f irq 16
at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x2600-0x261f irq 19
at
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib9
pci1: <display, VGA> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0x480-0x48f,0x376,0x170-0x177,0x3f
6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: unable to set the command byte.
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: unable to set the command byte.
fdc0: <floppy drive controller> port 0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
orm0: <ISA Option ROMs> at iomem
0xcc800-0xcdfff,0xcb000-0xcc7ff,0xc0000-0xcafff
on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acd0: DVDROM <HL-DT-STDVD-ROM GDR8082N/0L03> at ata0-master UDMA33
Waiting 15 seconds for SCSI devices to settle
Interrupt storm detected on "irq16: uhci0"; throttling interrupt source
ses0 at ahd1 bus 0 target 8 lun 0
ses0: <IBM 25R5170a S320 0 1> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da0 at ahd1 bus 0 target 0 lun 0
da0: <IBM-ESXS ST336753LC FN B85D> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing
Enabl
ed
da0: 34715MB (71096640 512 byte sectors: 255H 63S/T 4425C)
da1 at ahd1 bus 0 target 1 lun 0
da1: <IBM-ESXS ST336753LC FN B85D> Fixed Direct Access SCSI-3 device
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing
Enabl
ed
da1: 34715MB (71096640 512 byte sectors: 255H 63S/T 4425C)
da2 at ahd1 bus 0 target 2 lun 0
da2: <IBM-ESXS MAS3367NC FN C901> Fixed Direct Access SCSI-3 device
da2: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing
Enab
led
da2: 34715MB (71096640 512 byte sectors: 255H 63S/T 4425C)
da3 at ahd1 bus 0 target 3 lun 0
da3: <IBM-ESXS ST336753LC FN B85D> Fixed Direct Access SCSI-3 device
da3: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing
Enabl
ed
da3: 34715MB (71096640 512 byte sectors: 255H 63S/T 4425C)
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Mounting root from ufs:/dev/da0s1a
fire_saver: the console does not support M_VGA_CG320
module_register_init: MOD_LOAD (fire_saver, 0xc3ad3be0, 0) error 19
module_register_init: MOD_LOAD (ibcs2, 0xc3af3e90, 0) error 45
Thanks in advance
Gestur
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200503212029.j2LKTq7x054743>