Date: Thu, 24 Apr 2008 11:23:41 +0100 (BST) From: "Reinhold" <freebsd@violetlan.net> To: "Ivan Voras" <ivoras@freebsd.org> Cc: freebsd-questions@freebsd.org Subject: Re: brindging ath0 with re0 working, kinda, almost Message-ID: <53948.217.41.34.61.1209032621.squirrel@www.violetlan.net> In-Reply-To: <fupidm$ptd$1@ger.gmane.org> References: <61065.217.41.34.61.1209026488.squirrel@www.violetlan.net> <fupidm$ptd$1@ger.gmane.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, April 24, 2008 10:03, Ivan Voras wrote:
> Reinhold wrote:
>
>
>> I have a bridge set up on re0 and ath0 to get bridge0, here is my
>> ifconfig
>>
>> ath0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric
>> 0
>> mtu 2290
>
>> rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
>> 1500
>>
>
>> bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0
>> mtu 1500
>
>> The bridge is working in that both lan and wlan can access the internet
>> perfectly well but the problem lies with accessing each other.
>
> Depending on what your symptoms are, maybe you need to set the mtu of
> all three interfaces to the same value (1500).
>
Hi
Thanks for the quick reply.
The symptoms are as follows
When connected to the wlan I can ping the firewall but not one of our
servers, the server ip times out
This is a ping from one of the laptops connected to the wlan
>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time=1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms
>ping 192.168.1.5
Pinging 192.168.1.5 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.1.5:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
When I plug it in on the lan its works perfect with no time outs.
How come is the MTU so low on the ath0, but its working at full speed? The
wlan signal is stronger then any of our other wireless devices I've ever
used before
Regards
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?53948.217.41.34.61.1209032621.squirrel>