Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 25 Feb 2004 18:18:01 -0800 (PST)
From:      Doug White <dwhite@gumbysoft.com>
To:        Ulf Zimmermann <ulf@Alameda.net>
Cc:        current@FreeBSD.org
Subject:   Re: ACPI error messages on HP DL140 server
Message-ID:  <20040225181715.Y44153@carver.gumbysoft.com>
In-Reply-To: <20040225214601.GJ89845@seven.alameda.net>
References:  <20040225214601.GJ89845@seven.alameda.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 25 Feb 2004, Ulf Zimmermann wrote:

> I got some HP DL140 servers, single P4-2.4GHz/533 (HT capable), second cpu not
> installed. 1GB memory. Below is an ouput of the kernel boot messages. Everything
> seems to work, but many messages about ACPI. Should I be worried ? Anyone
> interested in checking things out, debugging things before we put this
> machine into production ?

These are bugs in the AML ... check if there's a BIOS update, maybe.  If
the machine works, I wouldn't worry too much about it.

>
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 5.2.1-RC2 #0: Wed Feb 25 13:25:12 MST 2004
>     root@imgphx01.autc.com:/usr/obj/usr/src/sys/IMG
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a37000.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a37294.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.34-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
>   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
> MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> real memory  = 1073676288 (1023 MB)
> avail memory = 1033510912 (985 MB)
> ACPI APIC Table: <A M I  OEMAPIC >
> ioapic0 <Version 1.1> irqs 0-15 on motherboard
> ioapic1 <Version 1.1> irqs 16-31 on motherboard
> ioapic2 <Version 1.1> irqs 32-47 on motherboard
> Pentium Pro MTRR support enabled
>     ACPI-0660: *** Warning: Type override - [DEB_] had invalid type (Integer) fo
> r Scope operator, changed to (Scope)
>     ACPI-0660: *** Warning: Type override - [MLIB] had invalid type (Integer) fo
> r Scope operator, changed to (Scope)
>     ACPI-0660: *** Warning: Type override - [IO__] had invalid type (Integer) fo
> r Scope operator, changed to (Scope)
>     ACPI-0660: *** Warning: Type override - [DATA] had invalid type (String) for
>  Scope operator, changed to (Scope)
>     ACPI-0660: *** Warning: Type override - [SIO_] had invalid type (String) for
>  Scope operator, changed to (Scope)
>     ACPI-0660: *** Warning: Type override - [SB__] had invalid type (String) for
>  Scope operator, changed to (Scope)
>     ACPI-0660: *** Warning: Type override - [PM__] had invalid type (String) for
>  Scope operator, changed to (Scope)
>     ACPI-0660: *** Warning: Type override - [ICNT] had invalid type (String) for
>  Scope operator, changed to (Scope)
>     ACPI-0660: *** Warning: Type override - [ACPI] had invalid type (String) for
>  Scope operator, changed to (Scope)
>     ACPI-0660: *** Warning: Type override - [IORG] had invalid type (String) for
>  Scope operator, changed to (Scope)
>     ACPI-0660: *** Warning: Type override - [SB__] had invalid type (String) for
>  Scope operator, changed to (Scope)
>     ACPI-0660: *** Warning: Type override - [PM__] had invalid type (String) for
>  Scope operator, changed to (Scope)
>     ACPI-0660: *** Warning: Type override - [SIO_] had invalid type (String) for
>  Scope operator, changed to (Scope)
>     ACPI-0660: *** Warning: Type override - [PM__] had invalid type (String) for
>  Scope operator, changed to (Scope)
>     ACPI-0660: *** Warning: Type override - [BIOS] had invalid type (Integer) fo
> r Scope operator, changed to (Scope)
>     ACPI-0660: *** Warning: Type override - [CMOS] had invalid type (Integer) fo
> r Scope operator, changed to (Scope)
>     ACPI-0660: *** Warning: Type override - [KBC_] had invalid type (Integer) fo
> r Scope operator, changed to (Scope)
>     ACPI-0660: *** Warning: Type override - [OEM_] had invalid type (Integer) fo
> r Scope operator, changed to (Scope)
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <A M I  OEMRSDT > on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> pcibios: BIOS version 2.10
> Using $PIR table, 3 entries at 0xc00f4630
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_cpu1: <CPU> on acpi0
> device_probe_and_attach: acpi_cpu1 attach returned 6
> acpi_cpu1: <CPU> on acpi0
> device_probe_and_attach: acpi_cpu1 attach returned 6
> acpi_cpu1: <CPU> on acpi0
> device_probe_and_attach: acpi_cpu1 attach returned 6
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib0: slot 15 INTA is routed to irq 10
> pci0: <display, VGA> at device 3.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 15.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <ServerWorks CSB6 UDMA100 controller> port 0xffa0-0xffaf,0x374-0x377,0x
> 170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata0: [MPSAFE]
> ata1: at 0x170 irq 15 on atapci0
> ata1: [MPSAFE]
> ohci0: <OHCI (generic) USB controller> mem 0xfe9fe000-0xfe9fefff irq 10 at devic
> e 15.2 on pci0
> usb0: OHCI version 1.0, legacy support
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 4 ports with 4 removable, self powered
> pcib1: <ACPI Host-PCI bridge> on acpi0
> pcib1: could not read bus number from config space
> pcib1: trying bus number 1
> pci1: <ACPI PCI bus> on pcib1
> pcib2: <ACPI Host-PCI bridge> on acpi0
> pcib2: could not read bus number from config space
> pcib2: trying bus number 2
> pci2: <ACPI PCI bus> on pcib2
> bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2002> mem 0xfebb0000
> -0xfebbffff,0xfebc0000-0xfebcffff irq 19 at device 0.0 on pci2
> bge0: Ethernet address: 00:0e:7f:30:32:aa
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
> -FDX, auto
> bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2002> mem 0xfebe0000
> -0xfebeffff,0xfebf0000-0xfebfffff irq 18 at device 0.1 on pci2
> bge1: Ethernet address: 00:0e:7f:30:32:ab
> miibus1: <MII bus> on bge1
> brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
> brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
> -FDX, auto
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> acpi_cpu1: <CPU> on acpi0
> device_probe_and_attach: acpi_cpu1 attach returned 6
> acpi_cpu1: <CPU> on acpi0
> device_probe_and_attach: acpi_cpu1 attach returned 6
> acpi_cpu1: <CPU> on acpi0
> device_probe_and_attach: acpi_cpu1 attach returned 6
> orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
> pmtimer0 on isa0
> fdc0: ready for input in output
> fdc0: cmd 3 failed at out byte 1 of 3
> ppc0: parallel port not found.
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounter "TSC" frequency 2399338368 Hz quality 800
> Timecounters tick every 10.000 msec
> acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0%
> GEOM: create disk ad0 dp=0xc6b9e960
> ad0: 238475MB <WDC WD2500PB-55FBA0> [484521/16/63] at ata0-master UDMA100
> GEOM: create disk ad1 dp=0xc6b9e660
> ad1: 238475MB <WDC WD2500PB-55FBA0> [484521/16/63] at ata0-slave UDMA100
> acd0: CDROM <CD-224E> at ata1-master PIO4
> Mounting root from ufs:/dev/ad0s1a
>
>
>

-- 
Doug White                    |  FreeBSD: The Power to Serve
dwhite@gumbysoft.com          |  www.FreeBSD.org



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040225181715.Y44153>