Date: Sat, 26 Apr 1997 01:29:35 +0200 (MET DST) From: Joachim.Wunder@lrz.tu-muenchen.de (Joachim Wunder) To: questions@freebsd.org Subject: Kernel Detect Problems Message-ID: <9704252329.AA20542@sun1.lrz-muenchen.de>
next in thread | raw e-mail | index | archive | help
Hi,
even after hours of reconfig of my kernel I can't bring two devices to work
properly:
FreeBSD 2.1.7-RELEASE #1: Fri Apr 25 21:34:36 MET DST 1997
wunder@marauder.flat.steinkamm.com:/usr/src/sys/compile/MARAUDER
CPU: 100-MHz Pentium 815\\100 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67108864 (65536K bytes)
avail memory = 62976000 (61500K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82439> rev 3 on pci0:0
chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:7:0
chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1
vga0 <VGA-compatible display device> rev 84 int a irq ?? on pci0:16
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x240-0x25f irq 9 on isa
ed0: address 00:00:b4:3c:6d:c9, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
qcam0 not found at 0x378
^------ Sometimes it is detected (after powering on the machine for sure
always, but almost never after a reboot). Under Win95 & NT it works great.
IRQ 7 is used by the QuickCam in my Kernel...
psm0 at 0x60-0x63 irq 12 on motherboard
pca0 on motherboard
pca0: PC speaker audio driver
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
fd1: 1.2MB 5.25in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <QUANTUM FIREBALL_TM3200A>
wd0: 3067MB (6281856 sectors), 6232 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (atapi): <FX800S/R03>, removable, intr, dma, iordis
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 5 drq 1 on isa
sb0: <SoundBlaster 16 4.2>
sbxvi0 at 0x0 drq 5 on isa
sbxvo0: <SoundBlaster 16 4.2>
sbmidi0 not found at 0x330
^-------- can't get it to work...:-( It's a very average PnP 16-Bit SBPro-
compatible card, but the MIDI-Part works fine under Win95...
opl0 at 0x388 on isa
opl0: <Yamaha OPL-3 FM>
mpu0 at 0x330 irq 10 drq 0 on isa
mpu0: <MPU-401 MIDI Interface 0.0 >
Any ideas would be greatly appreciated!!!
Thanks,
Achim
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9704252329.AA20542>