Date: Mon, 18 Jun 2001 18:51:19 -0700 (PDT) From: "Reginald S. Perry" <reggie@LambdaWerks.org> To: freebsd-mobile@freebsd.org Subject: D-Link DWL-650 Startup Problem Message-ID: <Pine.BSF.4.21.0106181838280.3601-100000@miles.lambdawerks.org>
next in thread | raw e-mail | index | archive | help
Hi there, I recently bought an M-Tech 8500V (Clevo 8500V) and have installed FreeBSD on it. Things are almost good to go but I have a couple of annoyances that I would like to resolve. The biggest one is that on powerup, my D-Link wireless network card will fail the probe and attach. Here is the relavent message: Jun 18 15:52:20 dizzy /kernel: wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 9 slot 1 on pccard1 Jun 18 15:52:20 dizzy /kernel: wi0: mac read failed 5 Jun 18 15:52:20 dizzy /kernel: device_probe_and_attach: wi0 attach returned 5 If I do a reboot (shutdown -r), the card usually comes up fine. The card also cannot be hot-plugged into the system. The other annoyance is that my RealTek 8139 cannot be listed in my ifconfig_rl0 line in rc.conf if I want the wireless card to acquire an IP address. I use DHCP for both interfaces. Is there some sort of ordering problem. What I would like to be able to do is go to work and plug into the rl device, and then come home and stick in the d-link card and have things work OK. I will attach my boot output at the end of this message. Any other info or things you would like me to do, just let me know. Thanks. -Reggie Jun 18 15:52:19 dizzy /kernel: Copyright (c) 1992-2001 The FreeBSD Project. Jun 18 15:52:19 dizzy /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Jun 18 15:52:19 dizzy /kernel: The Regents of the University of California. All rights reserved. Jun 18 15:52:19 dizzy /kernel: FreeBSD 4.3-STABLE #1: Fri Jun 15 23:15:49 PDT 2001 Jun 18 15:52:19 dizzy /kernel: root@dizzy.lambdawerks.org:/usr/obj/usr/src/sys/DIZZY Jun 18 15:52:19 dizzy /kernel: Timecounter "i8254" frequency 1193182 Hz Jun 18 15:52:19 dizzy /kernel: CPU: Pentium III/Pentium III Xeon/Celeron (999.67-MHz 686-class CPU) Jun 18 15:52:19 dizzy /kernel: Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Jun 18 15:52:19 dizzy /kernel: Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> Jun 18 15:52:20 dizzy /kernel: real memory = 536805376 (524224K bytes) Jun 18 15:52:20 dizzy /kernel: avail memory = 517910528 (505772K bytes) Jun 18 15:52:20 dizzy /kernel: Preloaded elf kernel "kernel" at 0xc04a2000. Jun 18 15:52:20 dizzy /kernel: Pentium Pro MTRR support enabled Jun 18 15:52:20 dizzy /kernel: md0: Malloc disk Jun 18 15:52:20 dizzy /kernel: apm0: <APM BIOS> on motherboard Jun 18 15:52:20 dizzy /kernel: apm: found APM BIOS v1.2, connected at v1.2 Jun 18 15:52:20 dizzy /kernel: npx0: <math processor> on motherboard Jun 18 15:52:20 dizzy /kernel: npx0: INT 16 interface Jun 18 15:52:20 dizzy /kernel: pcib0: <Host to PCI bridge> on motherboard Jun 18 15:52:20 dizzy /kernel: pci0: <PCI bus> on pcib0 Jun 18 15:52:20 dizzy /kernel: pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0 Jun 18 15:52:20 dizzy /kernel: pci1: <PCI bus> on pcib1 Jun 18 15:52:20 dizzy /kernel: pci1: <ATI model 4c46 graphics accelerator> at 0.0 irq 11 Jun 18 15:52:20 dizzy /kernel: isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 Jun 18 15:52:20 dizzy /kernel: isa0: <ISA bus> on isab0 Jun 18 15:52:20 dizzy /kernel: atapci0: <VIA 82C686 ATA66 controller> port 0x1c20-0x1c2f at device 7.1 on pci0 Jun 18 15:52:20 dizzy /kernel: ata0: at 0x1f0 irq 14 on atapci0 Jun 18 15:52:20 dizzy /kernel: ata1: at 0x170 irq 15 on atapci0 Jun 18 15:52:20 dizzy /kernel: uhci0: <VIA 83C572 USB controller> port 0x1c00-0x1c1f irq 11 at device 7.2 on pci0 Jun 18 15:52:20 dizzy /kernel: usb0: <VIA 83C572 USB controller> on uhci0 Jun 18 15:52:20 dizzy /kernel: usb0: USB revision 1.0 Jun 18 15:52:20 dizzy /kernel: uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Jun 18 15:52:20 dizzy /kernel: uhub0: 2 ports with 2 removable, self powered Jun 18 15:52:20 dizzy /kernel: isab1: <PCI to ISA bridge (vendor=1106 device=3057)> at device 7.4 on pci0 Jun 18 15:52:20 dizzy /kernel: chip1: <VIA 82C686 AC97 Modem> port 0x1000-0x10ff irq 10 at device 7.6 on pci0 Jun 18 15:52:20 dizzy /kernel: rl0: <RealTek 8139 10/100BaseTX> port 0x1400-0x14ff mem 0xf0004800-0xf00048ff irq 10 at device 11.0 on pci0 Jun 18 15:52:20 dizzy /kernel: rl0: Ethernet address: 00:90:f5:03:7c:09 Jun 18 15:52:20 dizzy /kernel: miibus0: <MII bus> on rl0 Jun 18 15:52:20 dizzy /kernel: rlphy0: <RealTek internal media interface> on miibus0 Jun 18 15:52:20 dizzy /kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Jun 18 15:52:20 dizzy /kernel: chip2: <PCI to CardBus bridge (vendor=104c device=ac42)> at device 12.0 on pci0 Jun 18 15:52:20 dizzy /kernel: chip3: <PCI to CardBus bridge (vendor=104c device=ac42)> at device 12.1 on pci0 Jun 18 15:52:20 dizzy /kernel: pci0: <unknown card> (vendor=0x104c, dev=0x8027) at 12.2 irq 11 Jun 18 15:52:20 dizzy /kernel: pci0: <unknown card> (vendor=0x125d, dev=0x1988) at 13.0 irq 5 Jun 18 15:52:20 dizzy /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 Jun 18 15:52:20 dizzy /kernel: fdc0: FIFO enabled, 8 bytes threshold Jun 18 15:52:20 dizzy /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Jun 18 15:52:20 dizzy /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Jun 18 15:52:20 dizzy /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Jun 18 15:52:20 dizzy /kernel: kbd0 at atkbd0 Jun 18 15:52:20 dizzy /kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0 Jun 18 15:52:20 dizzy /kernel: psm0: model GlidePoint, device ID 0 Jun 18 15:52:20 dizzy /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Jun 18 15:52:20 dizzy /kernel: sc0: <System console> at flags 0x100 on isa0 Jun 18 15:52:20 dizzy /kernel: sc0: VGA <16 virtual consoles, flags=0x300> Jun 18 15:52:20 dizzy /kernel: pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0 Jun 18 15:52:20 dizzy /kernel: pcic0: Polling mode Jun 18 15:52:20 dizzy /kernel: pccard0: <PC Card bus -- kludge version> on pcic0 Jun 18 15:52:20 dizzy /kernel: pccard1: <PC Card bus -- kludge version> on pcic0 Jun 18 15:52:20 dizzy /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Jun 18 15:52:20 dizzy /kernel: sio0: type 16550A Jun 18 15:52:20 dizzy /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0 Jun 18 15:52:20 dizzy /kernel: sio1: type 16550A Jun 18 15:52:20 dizzy /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 Jun 18 15:52:20 dizzy /kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode Jun 18 15:52:20 dizzy /kernel: ppc0: FIFO with 16/16/15 bytes threshold Jun 18 15:52:20 dizzy /kernel: plip0: <PLIP network interface> on ppbus0 Jun 18 15:52:20 dizzy /kernel: lpt0: <Printer> on ppbus0 Jun 18 15:52:20 dizzy /kernel: lpt0: Interrupt-driven port Jun 18 15:52:20 dizzy /kernel: ppi0: <Parallel I/O> on ppbus0 Jun 18 15:52:20 dizzy /kernel: ad0: 28615MB <FUJITSU MHL2300AT> [58140/16/63] at ata0-master UDMA66 Jun 18 15:52:20 dizzy /kernel: acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2502> at ata1-master using PIO4 Jun 18 15:52:20 dizzy /kernel: Mounting root from ufs:/dev/ad0s2a Jun 18 15:52:20 dizzy /kernel: pccard: card inserted, slot 1 Jun 18 15:52:20 dizzy /kernel: wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 9 slot 1 on pccard1 Jun 18 15:52:20 dizzy /kernel: wi0: mac read failed 5 Jun 18 15:52:20 dizzy /kernel: device_probe_and_attach: wi0 attach returned 5 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0106181838280.3601-100000>