Date: Wed, 24 Jan 2007 10:52:12 +0100 From: "felix.schalck" <felix.schalck@gmx.net> To: Christian Walther <cptsalek@gmail.com> Cc: "felix.schalck" <felix.schalck@gmail.com>, freebsd-questions@freebsd.org Subject: Re: cardbus not working Message-ID: <45B72C4C.9040800@gmx.net> In-Reply-To: <14989d6e0701232221x87e308dj6b68c03ed25349e@mail.gmail.com> References: <45B62A3A.3050608@gmail.com> <14989d6e0701232221x87e308dj6b68c03ed25349e@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Christian Walther wrote: > Hi Felix, > > On 23/01/07, felix.schalck <felix.schalck@gmail.com> wrote: >> Hi, >> >> I'm trying to get a WLAN pcmcia card working on freebsd 6.2. Kernel with >> cardbus support compiled fine, but when the card is inserted, i get: >> >> Status is 0x30000086 >> Status is 0x30000820 >> cbb0: card inserted: event=0x00000000, state=30000820 >> cbb0: cbb_power: 3V >> cbb0: cbb_power: 0V >> >> Dmesg shows: >> >> cbb0: <ENE CB1410 PCI-CardBus Bridge> at device 7.0 on pci2 >> cbb0: Found memory at e0202000 >> cbb0: Secondary bus is 2 >> cardbus0: <CardBus bus> on cbb0 >> pccard0: <16-bit PCCard bus> on cbb0 >> >> Any ideas ? What are my possibilities/chances to get it work ? > > Please provide some more information about your system. Is this a > laptop, or are you using a PCMCIA- to PCI-Adapter with a desktop > system? What model is your laptop or desktop system? > Did you load the appropriate driver for your WLAN card, or is it > compiled into the kernel? Thank you very much for your help; You're absolutely right: sorry for the poor infos: Card is an orinoco gold 8470 wd with the *theoretically* supported atheros chipset. Drivers ath_hal is compiled into kernel: Perhaps I'shoud try it with separate kernel-module ? #Atheros chipset support device ath device ath_hal device ath_rate_sample # wireless options device wlan_wep device wlan_ccmp device wlan_tkip device wlan_xauth device wlan_acl pciconf -l shows: hostb0@pci0:0:0: class=0x060000 card=0x01201558 chip=0x35808086 rev=0x02 hdr=0x00 none0@pci0:0:1: class=0x088000 card=0x01201558 chip=0x35848086 rev=0x02 hdr=0x00 none1@pci0:0:3: class=0x088000 card=0x01201558 chip=0x35858086 rev=0x02 hdr=0x00 agp0@pci0:2:0: class=0x030000 card=0x01201558 chip=0x35828086 rev=0x02 hdr=0x00 none2@pci0:2:1: class=0x038000 card=0x01201558 chip=0x35828086 rev=0x02 hdr=0x00 uhci0@pci0:29:0: class=0x0c0300 card=0x01201558 chip=0x24c28086 rev=0x03 hdr=0x00 uhci1@pci0:29:1: class=0x0c0300 card=0x01201558 chip=0x24c48086 rev=0x03 hdr=0x00 uhci2@pci0:29:2: class=0x0c0300 card=0x01201558 chip=0x24c78086 rev=0x03 hdr=0x00 ehci0@pci0:29:7: class=0x0c0320 card=0x01201558 chip=0x24cd8086 rev=0x03 hdr=0x00 pcib1@pci0:30:0: class=0x060400 card=0x00000000 chip=0x24488086 rev=0x83 hdr=0x01 isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24cc8086 rev=0x03 hdr=0x00 atapci0@pci0:31:1: class=0x01018a card=0x01201558 chip=0x24ca8086 rev=0x03 hdr=0x00 none3@pci0:31:3: class=0x0c0500 card=0x01201558 chip=0x24c38086 rev=0x03 hdr=0x00 pcm0@pci0:31:5: class=0x040100 card=0x01201558 chip=0x24c58086 rev=0x03 hdr=0x00 none4@pci0:31:6: class=0x070300 card=0x01201558 chip=0x24c68086 rev=0x03 hdr=0x00 rl0@pci2:6:0: class=0x020000 card=0x01201558 chip=0x813910ec rev=0x10 hdr=0x00 cbb0@pci2:7:0: class=0x060700 card=0x01201558 chip=0x14101524 rev=0x01 hdr=0x02 iwi0@pci2:8:0: class=0x028000 card=0x27028086 chip=0x42208086 rev=0x05 hdr=0x00 So, do you think the problem is due to the cardbus, or to the inserted card ? Thanks again for your help, Felix > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?45B72C4C.9040800>