Date: Fri, 03 Mar 2000 12:09:27 -0700 From: Warner Losh <imp@village.org> To: current@freebsd.org Subject: fdisk -s, post 4.0 Message-ID: <200003031909.MAA24732@harmony.village.org>
next in thread | raw e-mail | index | archive | help
I'd like to add a fdisk -s command after 4.0. What -s would do is
produce a much boiled down fdisk output, for two consumers. First,
for people who don't want to wade through a whole screen of stuff, and
second for scripts. Here's the current output. Lemme know what you
think.
BTW, I'm also in the middle of writing a prepdisk script that uses
fdisk and disklabel to properly and easily label a disk for use under
FreeBSD. I'll post that later and would like to include that in
FreeBSD as well, given how restricted disklabel auto's intended
purpose is. I may also do a gui, but that will likely take more time
than I have to devote to this.
# fdisk -s da2
/dev/rda2: 555 cyl 255 hd 63 sec
Part Start Size Type Flags
1: 63 8916012 0xa5 0x80
# fdisk da2
******* Working on device /dev/rda2 *******
parameters extracted from in-core disklabel are:
cylinders=555 heads=255 sectors/track=63 (16065 blks/cyl)
parameters to be used for BIOS calculations are:
cylinders=555 heads=255 sectors/track=63 (16065 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165,(FreeBSD/NetBSD/386BSD)
start 63, size 8916012 (4353 Meg), flag 80 (active)
beg: cyl 0/ sector 1/ head 1;
end: cyl 554/ sector 63/ head 254
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
Comments?
Warner
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200003031909.MAA24732>