Date: Fri, 04 Nov 2005 10:06:31 -0500 From: "Lynn A. Roth" <lynnr.junk@interactivefs.com> To: freebsd-current@freebsd.org Subject: Re: Problems Installing to PowerEdge 850 with SATA Drive Message-ID: <436B78F7.3010300@interactivefs.com> In-Reply-To: <200511032222.jA3MMq4a087797@ambrisko.com> References: <dkd1ct$eaa$1@sea.gmane.org> <200511032222.jA3MMq4a087797@ambrisko.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Doug Ambrisko wrote: > Lynn A. Roth writes: > | I have two new Dell Poweredge 850 machines. They have an Intel ICH7 > | chipset. When I boot FreeBSD 6 RC1, the controller is identified, but > | any drives connected to the SATA ports are not detected. The drive that > | is included with the system is a Seagate 7200.7 drive. I also tried a > | Maxtor. > > I can confirm the problem on the PE850. I have it working with my > latest 4.X SATA patches (which I haven't published yet). I might > be able to look into this. > > FWIW, I my code these SATA registers in 4.X before the become alive: > ata2: Intel SATA P0 status 0 error 4050000 scontrol 0 0 1 > ata2: Intel SATA P0 status 113 error 4050000 scontrol 0 0 1 > ata2: Intel SATA P0 status 113 error 0 scontrol 0 0 1 > ata3: Intel SATA P1 status 0 error 4050000 scontrol 0 1 1 > ata3: Intel SATA P1 status 113 error 4050000 scontrol 0 1 1 > ata3: Intel SATA P1 status 113 error 0 scontrol 0 1 1 > On other Intel controllers they I don't have to acknowledge the > errors off the bat. > > Doug A. If there is anything I can do to help, let me know. If there is a place you can point me to start working with it, that would be great too. Thanks, Lynn
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?436B78F7.3010300>