Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 14 Jun 1999 09:57:38 -0700
From:      Kent Stewart <kstewart@3-cities.com>
To:        Mike Meyer <mwm@phone.net>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: Yamaha CD-R[W] drives (Re: Is the CD driver)
Message-ID:  <37653482.115577EC@3-cities.com>
References:  <Pine.BSF.4.10.9906140901080.63871-100000@guru.phone.net>

next in thread | previous in thread | raw e-mail | index | archive | help
Choose > Start > settings > control panel > add/remove progs > startup
disk. When you finish creating a startup disk you have a Win98 DOS boot
that will add your CDROM. You need one of these disks around for your
e-machine anyway.

Kent

Mike Meyer wrote:
> 
> Ok, so where do I find a DOS bootable floppy? The only MS box in the
> house is the children's e-machine, running Windows 98...
> 
>         <mike
> 
> On Mon, 14 Jun 1999, Peter Radcliffe wrote:
> 
> > Date: Mon, 14 Jun 1999 11:16:55 -0400
> > From: Peter Radcliffe <pir@pir.net>
> > To: freebsd-stable@FreeBSD.ORG
> > Subject: Yamaha CD-R[W] drives (Re: Is the CD driver)
> >
> > Stephen Krzywicki <sek@superiorcam.com> probably said:
> > > The latest firmware release from Yamaha may fix this problem.
> >
> > Speaking of firmware upgrades:
> >
> > http://www.yamahayst.com/techsup/flasrom.htm
> > ] For Windows NT and/or UNIX-SGI Users:
> > ] If you are operating under Windows NT or UNIX type environments, you
> > ] must use the DOS Batch utility to upgrade the Yamaha Recorder. Boot
> > ] from a DOS bootable Floppy, configured as shown below for your SCSI
> > ] Card and then run the DOS batch upgrade utility. Otherwise, you must
> > ] take our drive to a DOS, Windows 95, or Macintosh environment to
> > ] upgrade our unit.
> >
> > http://www.yamahayst.com/techsup/cdr400fi.htm
> > ] For Models (CDR400c, CDR400cx, CDR400t, CDR400tx, CDR400AT)
> > ] Version NO.: 1.0q Inquiry Date: Nov. 11, '98
> > ] 1) Making the same firmware file usable for CDR's and CRW's.
> > ] 2) Extended support for silver media.
> > ] 3) Reducing the noise problem for reading CD-DA discs.
> >
> > Note the extended support for silver (cheepo) media.
> > (similar comments in the CRW4260 section)
> >
> > If you're using a Yamaha CD-R[W], upgrade your firmware tp 1.0q
> >
> > P.
> >
> > --
> > pir               pir@pir.net      pir@shore.net      pir@net.tufts.edu
> >
> >
> >
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-stable" in the body of the message
> >
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message

-- 
Kent Stewart
Richland, WA

mailto:kstewart@3-cities.com
http://www.3-cities.com/~kstewart/index.html


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?37653482.115577EC>