Date: Fri, 2 Jun 2006 18:15:50 GMT From: Carmelo Guccini <elloallo@infinito.it> To: freebsd-gnats-submit@FreeBSD.org Subject: misc/98388: FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA Message-ID: <200606021815.k52IFo0O053113@www.freebsd.org> Resent-Message-ID: <200606021820.k52IKFoR053457@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 98388 >Category: misc >Synopsis: FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Fri Jun 02 18:20:15 GMT 2006 >Closed-Date: >Last-Modified: >Originator: Carmelo Guccini >Release: 6.1 >Organization: Undefined >Environment: FreeBSD AMOS-gw1.allo.it 6.1-RELEASE-p1 FreeBSD 6.1-RELEASE-p1 #0: Fri Jun 2 15:41:03 CEST 2006 root@AMOS-gw1.allo.it:/usr/obj/usr/src/sys/AMOS-SMP i386 >Description: Hello ! I bought an ASUS motherboard with onboard SATA II controller. I attached 2 HDs SATA II but when I run dmesg I notice that my system sees them as normal older SATA 150 instead of SATA 300. Is there any suggestion to solve this problem ? Have a nice day. ------------------dmesg output----------------------- Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE-p1 #0: Fri Jun 2 15:41:03 CEST 2006 r...@AMOS-gw1.allo.it:/usr/obj/usr/src/sys/AMOS-SMP WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant WARNING: MPSAFE network stack disabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) D CPU 3.00GHz (3000.38-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf62 Stepping = 2 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe43d<SSE3,RSVD2,MON,DS_CPL,VMX,CNTX-ID,CX16,<b14>,<b15>> AMD Features=0x20000000<LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 2138701824 (2039 MB) avail memory = 2087825408 (1991 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 atapci0: <ITE IT8211F UDMA133 controller> port 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xb800-0xb803,0xb400-0xb40f irq 19 at device 4.0 on pci1 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 atapci1: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci1 ata1: <ATA channel 1> on atapci1 atapci2: <Intel ICH7 SATA300 controller> port 0xa800-0xa807,0xa400-0xa403,0xa000-0xa007,0x9800-0x9803,0x9400-0x940f irq 17 at device 31.2 on pci0 atapci2: failed to enable memory mapping! ata4: <ATA channel 0> on atapci2 ata5: <ATA channel 1> on atapci2 acd0: DVDROM <HL-DT-STDVD-ROM GDR8163B/0L23> at ata0-master UDMA33 ad8: 114473MB <WDC WD1200JS-00MHB0 02.01C03> at ata4-master SATA150 GEOM_MIRROR: Device gm0 created (id=2415013281). GEOM_MIRROR: Device gm0: provider ad8 detected. ad10: 114473MB <WDC WD1200JS-00MHB0 02.01C03> at ata5-master SATA150 GEOM_MIRROR: Device gm0: provider ad10 detected. SMP: AP CPU #1 Launched! GEOM_MIRROR: Device gm0: provider ad10 activated. GEOM_MIRROR: Device gm0: provider mirror/gm0 launched. GEOM_MIRROR: Device gm0: rebuilding provider ad8. Trying to mount root from ufs:/dev/mirror/gm0s1a em0: link state changed to UP >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200606021815.k52IFo0O053113>