Date: Mon, 16 May 2016 18:47:53 +0000 (UTC) From: Stephen McConnell <slm@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-10@freebsd.org Subject: svn commit: r299962 - in stable/10/sys/dev/mpr: . mpi Message-ID: <201605161847.u4GIlrZ9093625@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: slm Date: Mon May 16 18:47:53 2016 New Revision: 299962 URL: https://svnweb.freebsd.org/changeset/base/299962 Log: MFC r299263, r299265, r299266, r299267, r299268, r299269, r299270, r299271, r299272, r299274, r299275 - (r299263) Update MPI headers to version 42. - (r299265) Several style changes and add copyrights for 2016. - (r299266) Add support for the Broadcom (Avago/LSI) 9305 16 and 24 port HBA's. - (r299267) No log bit in IOCStatus and endian-safe changes. Use MPI2_IOCSTATUS_MASK when checking IOCStatus to mask off the log bit, and make a few more things endian-safe. - (r299268) Change logging level for a debug string to use MPR_LOG instead of MPR_INFO. - (r299269) Fix possible use of invalid pointer. It was possible to use an invalid pointer to get the target ID value. To fix this, initialize a local Target ID variable to an invalid value and change that variable to a valid value only if the pointer to the Target ID is not NULL. - (r299270) No need to set the MPRSAS_SHUTDOWN flag because it's never used. - (r299271) Use callout_reset_sbt() instead of callout_reset() if FreeBSD ver is >= 1000029 - (r299272) done_ccb pointer can be used if it is NULL. To prevent this, move check for done_ccb == NULL to before done_ccb is used in mprsas_stop_unit_done(). - (r299274) Disks can go missing until a reboot is done in some cases. This is due to the DevHandle not being released, which causes the Firmware to not allow that disk to be re-added. - (r299275) Bump version of mpr driver to 13.00.00.00-fbsd Modified: stable/10/sys/dev/mpr/mpi/mpi2.h stable/10/sys/dev/mpr/mpi/mpi2_cnfg.h stable/10/sys/dev/mpr/mpi/mpi2_hbd.h stable/10/sys/dev/mpr/mpi/mpi2_history.txt stable/10/sys/dev/mpr/mpi/mpi2_init.h stable/10/sys/dev/mpr/mpi/mpi2_ioc.h stable/10/sys/dev/mpr/mpi/mpi2_ra.h stable/10/sys/dev/mpr/mpi/mpi2_raid.h stable/10/sys/dev/mpr/mpi/mpi2_sas.h stable/10/sys/dev/mpr/mpi/mpi2_targ.h stable/10/sys/dev/mpr/mpi/mpi2_tool.h stable/10/sys/dev/mpr/mpi/mpi2_type.h stable/10/sys/dev/mpr/mpr.c stable/10/sys/dev/mpr/mpr_config.c stable/10/sys/dev/mpr/mpr_ioctl.h stable/10/sys/dev/mpr/mpr_mapping.c stable/10/sys/dev/mpr/mpr_mapping.h stable/10/sys/dev/mpr/mpr_pci.c stable/10/sys/dev/mpr/mpr_sas.c stable/10/sys/dev/mpr/mpr_sas.h stable/10/sys/dev/mpr/mpr_sas_lsi.c stable/10/sys/dev/mpr/mpr_table.c stable/10/sys/dev/mpr/mpr_user.c stable/10/sys/dev/mpr/mprvar.h Directory Properties: stable/10/ (props changed) Modified: stable/10/sys/dev/mpr/mpi/mpi2.h ============================================================================== --- stable/10/sys/dev/mpr/mpi/mpi2.h Mon May 16 18:11:53 2016 (r299961) +++ stable/10/sys/dev/mpr/mpi/mpi2.h Mon May 16 18:47:53 2016 (r299962) @@ -1,6 +1,6 @@ /*- * Copyright (c) 2012-2015 LSI Corp. - * Copyright (c) 2013-2015 Avago Technologies + * Copyright (c) 2013-2016 Avago Technologies * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -34,7 +34,8 @@ /* * Copyright (c) 2000-2015 LSI Corporation. - * Copyright (c) 2013-2015 Avago Technologies + * Copyright (c) 2013-2016 Avago Technologies + * All rights reserved. * * * Name: mpi2.h @@ -43,7 +44,7 @@ * scatter/gather formats. * Creation Date: June 21, 2006 * - * mpi2.h Version: 02.00.33 + * mpi2.h Version: 02.00.42 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -125,6 +126,22 @@ * 04-17-13 02.00.31 Bumped MPI2_HEADER_VERSION_UNIT. * 08-19-13 02.00.32 Bumped MPI2_HEADER_VERSION_UNIT. * 12-05-13 02.00.33 Bumped MPI2_HEADER_VERSION_UNIT. + * 01-08-14 02.00.34 Bumped MPI2_HEADER_VERSION_UNIT. + * 06-13-14 02.00.35 Bumped MPI2_HEADER_VERSION_UNIT. + * 11-18-14 02.00.36 Updated copyright information. + * Bumped MPI2_HEADER_VERSION_UNIT. + * 03-16-15 02.00.37 Updated for MPI v2.6. + * Bumped MPI2_HEADER_VERSION_UNIT. + * Added Scratchpad registers to + * MPI2_SYSTEM_INTERFACE_REGS. + * Added MPI2_DIAG_SBR_RELOAD. + * Added MPI2_IOCSTATUS_INSUFFICIENT_POWER. + * 03-19-15 02.00.38 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-25-15 02.00.39 Bumped MPI2_HEADER_VERSION_UNIT + * 08-25-15 02.00.40 Bumped MPI2_HEADER_VERSION_UNIT. + * Added V7 HostDiagnostic register defines + * 12-15-15 02.00.41 Bumped MPI_HEADER_VERSION_UNIT + * 01-01-16 02.00.42 Bumped MPI_HEADER_VERSION_UNIT * -------------------------------------------------------------------------- */ @@ -160,8 +177,15 @@ #define MPI2_VERSION_02_05 (0x0205) +/* minor version for MPI v2.6 compatible products */ +#define MPI26_VERSION_MINOR (0x06) +#define MPI26_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \ + MPI26_VERSION_MINOR) +#define MPI2_VERSION_02_06 (0x0206) + + /* Unit and Dev versioning for this MPI header set */ -#define MPI2_HEADER_VERSION_UNIT (0x21) +#define MPI2_HEADER_VERSION_UNIT (0x2A) #define MPI2_HEADER_VERSION_DEV (0x00) #define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) #define MPI2_HEADER_VERSION_UNIT_SHIFT (8) @@ -217,7 +241,8 @@ typedef volatile struct _MPI2_SYSTEM_INT U32 HCBSize; /* 0x74 */ U32 HCBAddressLow; /* 0x78 */ U32 HCBAddressHigh; /* 0x7C */ - U32 Reserved6[16]; /* 0x80 */ + U32 Reserved6[12]; /* 0x80 */ + U32 Scratchpad[4]; /* 0xB0 */ U32 RequestDescriptorPostLow; /* 0xC0 */ U32 RequestDescriptorPostHigh; /* 0xC4 */ U32 Reserved7[14]; /* 0xC8 */ @@ -261,10 +286,17 @@ typedef volatile struct _MPI2_SYSTEM_INT */ #define MPI2_HOST_DIAGNOSTIC_OFFSET (0x00000008) +#define MPI2_DIAG_SBR_RELOAD (0x00002000) + #define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK (0x00001800) #define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT (0x00000000) #define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW (0x00000800) +/* Defines for V7A/V7R HostDiagnostic Register */ +#define MPI26_DIAG_BOOT_DEVICE_SELECT_FLASH64 (0x00000000) +#define MPI26_DIAG_BOOT_DEVICE_SELECT_HCDW64 (0x00000800) +#define MPI26_DIAG_BOOT_DEVICE_SELECT_FLASH32 (0x00001000) +#define MPI26_DIAG_BOOT_DEVICE_SELECT_HCDW32 (0x00001800) #define MPI2_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400) #define MPI2_DIAG_FORCE_HCB_ON_RESET (0x00000200) #define MPI2_DIAG_HCB_MODE (0x00000100) @@ -335,7 +367,15 @@ typedef volatile struct _MPI2_SYSTEM_INT #define MPI2_HCB_ADDRESS_HIGH_OFFSET (0x0000007C) /* - * Offsets for the Request Queue + * Offsets for the Scratchpad registers + */ +#define MPI26_SCRATCHPAD0_OFFSET (0x000000B0) +#define MPI26_SCRATCHPAD1_OFFSET (0x000000B4) +#define MPI26_SCRATCHPAD2_OFFSET (0x000000B8) +#define MPI26_SCRATCHPAD3_OFFSET (0x000000BC) + +/* + * Offsets for the Request Descriptor Post Queue */ #define MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET (0x000000C0) #define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET (0x000000C4) @@ -367,7 +407,8 @@ typedef struct _MPI2_DEFAULT_REQUEST_DES Mpi2DefaultRequestDescriptor_t, MPI2_POINTER pMpi2DefaultRequestDescriptor_t; /* defines for the RequestFlags field */ -#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x0E) +#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x1E) +#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_RSHIFT (1) /* use carefully; values below are pre-shifted left */ #define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00) #define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02) #define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06) @@ -455,6 +496,10 @@ typedef union _MPI2_REQUEST_DESCRIPTOR_U Mpi2RequestDescriptorUnion_t, MPI2_POINTER pMpi2RequestDescriptorUnion_t; + +/* for the RequestFlags field, use the same defines as MPI2_DEFAULT_REQUEST_DESCRIPTOR */ + + /* Reply Descriptors */ /* Default Reply Descriptor */ @@ -603,7 +648,8 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UN #define MPI2_FUNCTION_TOOLBOX (0x17) /* Toolbox */ #define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18) /* SCSI Enclosure Processor */ #define MPI2_FUNCTION_SMP_PASSTHROUGH (0x1A) /* SMP Passthrough */ -#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) /* SAS IO Unit Control */ +#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) /* SAS IO Unit Control */ /* for MPI v2.5 and earlier */ +#define MPI2_FUNCTION_IO_UNIT_CONTROL (0x1B) /* IO Unit Control */ /* for MPI v2.6 and later */ #define MPI2_FUNCTION_SATA_PASSTHROUGH (0x1C) /* SATA Passthrough */ #define MPI2_FUNCTION_DIAG_BUFFER_POST (0x1D) /* Diagnostic Buffer Post */ #define MPI2_FUNCTION_DIAG_RELEASE (0x1E) /* Diagnostic Release */ @@ -646,6 +692,7 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UN #define MPI2_IOCSTATUS_INVALID_FIELD (0x0007) #define MPI2_IOCSTATUS_INVALID_STATE (0x0008) #define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009) +#define MPI2_IOCSTATUS_INSUFFICIENT_POWER (0x000A) /* MPI v2.6 and later */ /**************************************************************************** * Config IOCStatus values @@ -1123,7 +1170,7 @@ typedef union _MPI2_IEEE_SGE_CHAIN_UNION } MPI2_IEEE_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_CHAIN_UNION, Mpi2IeeeSgeChainUnion_t, MPI2_POINTER pMpi2IeeeSgeChainUnion_t; -/* MPI25_IEEE_SGE_CHAIN64 is for MPI v2.5 products only */ +/* MPI25_IEEE_SGE_CHAIN64 is for MPI v2.5 and later */ typedef struct _MPI25_IEEE_SGE_CHAIN64 { U64 Address; @@ -1181,16 +1228,23 @@ typedef union _MPI25_SGE_IO_UNION #define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT (0x00) #define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT (0x80) +/* Next Segment Format */ + +#define MPI26_IEEE_SGE_FLAGS_NSF_MASK (0x1C) +#define MPI26_IEEE_SGE_FLAGS_NSF_MPI_IEEE (0x00) + /* Data Location Address Space */ #define MPI2_IEEE_SGE_FLAGS_ADDR_MASK (0x03) -#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00) /* for MPI v2.0, use in IEEE Simple Element only; for MPI v2.5, use in IEEE Simple or Chain element */ +#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00) /* for MPI v2.0, use in IEEE Simple Element only; for MPI v2.5 and later, use in IEEE Simple or Chain element */ #define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01) /* use in IEEE Simple Element only */ #define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02) #define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03) /* for MPI v2.0, use in IEEE Simple Element only; for MPI v2.5, use in IEEE Simple or Chain element */ #define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR (0x03) /* use in MPI v2.0 IEEE Chain Element only */ #define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR (MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR) /* typo in name */ +#define MPI26_IEEE_SGE_FLAGS_IOCCTL_ADDR (0x02) /* for MPI v2.6 only */ + /**************************************************************************** * IEEE SGE operation Macros ****************************************************************************/ @@ -1246,8 +1300,9 @@ typedef union _MPI2_SGE_IO_UNION #define MPI2_SGLFLAGS_ADDRESS_SPACE_MASK (0x0C) #define MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE (0x00) #define MPI2_SGLFLAGS_IOCDDR_ADDRESS_SPACE (0x04) -#define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08) -#define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE (0x0C) +#define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08) /* only for MPI v2.5 and earlier */ +#define MPI26_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08) /* only for MPI v2.6 */ +#define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE (0x0C) /* only for MPI v2.5 and earlier */ /* values for SGL Type subfield */ #define MPI2_SGLFLAGS_SGL_TYPE_MASK (0x03) #define MPI2_SGLFLAGS_SGL_TYPE_MPI (0x00) Modified: stable/10/sys/dev/mpr/mpi/mpi2_cnfg.h ============================================================================== --- stable/10/sys/dev/mpr/mpi/mpi2_cnfg.h Mon May 16 18:11:53 2016 (r299961) +++ stable/10/sys/dev/mpr/mpi/mpi2_cnfg.h Mon May 16 18:47:53 2016 (r299962) @@ -1,6 +1,6 @@ /*- * Copyright (c) 2012-2015 LSI Corp. - * Copyright (c) 2013-2015 Avago Technologies + * Copyright (c) 2013-2016 Avago Technologies * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -34,14 +34,15 @@ /* * Copyright (c) 2000-2015 LSI Corporation. - * Copyright (c) 2013-2015 Avago Technologies + * Copyright (c) 2013-2016 Avago Technologies + * All rights reserved. * * * Name: mpi2_cnfg.h * Title: MPI Configuration messages and pages * Creation Date: November 10, 2006 * - * mpi2_cnfg.h Version: 02.00.27 + * mpi2_cnfg.h Version: 02.00.35 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -210,6 +211,21 @@ * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. * Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. + * 01-08-14 02.00.28 Added more defines for the BiosOptions field of + * MPI2_CONFIG_PAGE_BIOS_1. + * 06-13-14 02.00.29 Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and + * more defines for the BiosOptions field. + * 11-18-14 02.00.30 Updated copyright information. + * Added MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG. + * Added AdapterOrderAux fields to BIOS Page 3. + * 03-16-15 02.00.31 Updated for MPI v2.6. + * Added BoardPowerRequirement, PCISlotPowerAllocation, and + * Flags field to IO Unit Page 7. + * Added IO Unit Page 11. + * Added new SAS Phy Event codes + * 05-25-15 02.00.33 Added more defines for the BiosOptions field of + * MPI2_CONFIG_PAGE_BIOS_1. + * 12-18-15 02.00.35 Added SATADeviceWaitTime to SAS IO Unit Page 4. * -------------------------------------------------------------------------- */ @@ -387,7 +403,6 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEAD #define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF) - /**************************************************************************** * Configuration messages ****************************************************************************/ @@ -491,8 +506,17 @@ typedef struct _MPI2_CONFIG_REPLY #define MPI25_MFGPAGE_DEVID_SAS3108_5 (0x0094) #define MPI25_MFGPAGE_DEVID_SAS3108_6 (0x0095) - - +/* MPI v2.6 SAS Products */ +#define MPI26_MFGPAGE_DEVID_SAS3216 (0x00C9) +#define MPI26_MFGPAGE_DEVID_SAS3224 (0x00C4) +#define MPI26_MFGPAGE_DEVID_SAS3316_1 (0x00C5) +#define MPI26_MFGPAGE_DEVID_SAS3316_2 (0x00C6) +#define MPI26_MFGPAGE_DEVID_SAS3316_3 (0x00C7) +#define MPI26_MFGPAGE_DEVID_SAS3316_4 (0x00C8) +#define MPI26_MFGPAGE_DEVID_SAS3324_1 (0x00C0) +#define MPI26_MFGPAGE_DEVID_SAS3324_2 (0x00C1) +#define MPI26_MFGPAGE_DEVID_SAS3324_3 (0x00C2) +#define MPI26_MFGPAGE_DEVID_SAS3324_4 (0x00C3) /* Manufacturing Page 0 */ @@ -962,14 +986,16 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT U16 BoardTemperature; /* 0x14 */ U8 BoardTemperatureUnits; /* 0x16 */ U8 Reserved3; /* 0x17 */ - U32 Reserved4; /* 0x18 */ - U32 Reserved5; /* 0x1C */ - U32 Reserved6; /* 0x20 */ - U32 Reserved7; /* 0x24 */ + U32 BoardPowerRequirement; /* 0x18 */ /* reserved prior to MPI v2.6 */ + U32 PCISlotPowerAllocation; /* 0x1C */ /* reserved prior to MPI v2.6 */ + U8 Flags; /* 0x20 */ /* reserved prior to MPI v2.6 */ + U8 Reserved6; /* 0x21 */ + U16 Reserved7; /* 0x22 */ + U32 Reserved8; /* 0x24 */ } MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7, Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t; -#define MPI2_IOUNITPAGE7_PAGEVERSION (0x04) +#define MPI2_IOUNITPAGE7_PAGEVERSION (0x05) /* defines for IO Unit Page 7 CurrentPowerMode and PreviousPowerMode fields */ #define MPI25_IOUNITPAGE7_PM_INIT_MASK (0xC0) @@ -1050,6 +1076,8 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT #define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01) #define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02) +/* defines for IO Unit Page 7 Flags field */ +#define MPI2_IOUNITPAGE7_FLAG_CABLE_POWER_EXC (0x01) /* IO Unit Page 8 */ @@ -1168,6 +1196,61 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT #define MPI2_IOUNITPAGE10_PAGEVERSION (0x01) +/* IO Unit Page 11 (for MPI v2.6 and later) */ + +typedef struct _MPI26_IOUNIT11_SPINUP_GROUP +{ + U8 MaxTargetSpinup; /* 0x00 */ + U8 SpinupDelay; /* 0x01 */ + U8 SpinupFlags; /* 0x02 */ + U8 Reserved1; /* 0x03 */ +} MPI26_IOUNIT11_SPINUP_GROUP, MPI2_POINTER PTR_MPI26_IOUNIT11_SPINUP_GROUP, + Mpi26IOUnit11SpinupGroup_t, MPI2_POINTER pMpi26IOUnit11SpinupGroup_t; + +/* defines for IO Unit Page 11 SpinupFlags */ +#define MPI26_IOUNITPAGE11_SPINUP_DISABLE_FLAG (0x01) + + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * four and check the value returned for NumPhys at runtime. + */ +#ifndef MPI26_IOUNITPAGE11_PHY_MAX +#define MPI26_IOUNITPAGE11_PHY_MAX (4) +#endif + +typedef struct _MPI26_CONFIG_PAGE_IO_UNIT_11 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + MPI26_IOUNIT11_SPINUP_GROUP SpinupGroupParameters[4]; /* 0x08 */ + U32 Reserved2; /* 0x18 */ + U32 Reserved3; /* 0x1C */ + U32 Reserved4; /* 0x20 */ + U8 BootDeviceWaitTime; /* 0x24 */ + U8 Reserved5; /* 0x25 */ + U16 Reserved6; /* 0x26 */ + U8 NumPhys; /* 0x28 */ + U8 PEInitialSpinupDelay; /* 0x29 */ + U8 PEReplyDelay; /* 0x2A */ + U8 Flags; /* 0x2B */ + U8 PHY[MPI26_IOUNITPAGE11_PHY_MAX];/* 0x2C */ +} MPI26_CONFIG_PAGE_IO_UNIT_11, + MPI2_POINTER PTR_MPI26_CONFIG_PAGE_IO_UNIT_11, + Mpi26IOUnitPage11_t, MPI2_POINTER pMpi26IOUnitPage11_t; + +#define MPI26_IOUNITPAGE11_PAGEVERSION (0x00) + +/* defines for Flags field */ +#define MPI26_IOUNITPAGE11_FLAGS_AUTO_PORTENABLE (0x01) + +/* defines for PHY field */ +#define MPI26_IOUNITPAGE11_PHY_SPINUP_GROUP_MASK (0x03) + + + + + /**************************************************************************** * IOC Config Pages @@ -1331,7 +1414,9 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ U32 BiosOptions; /* 0x04 */ U32 IOCSettings; /* 0x08 */ - U32 Reserved1; /* 0x0C */ + U8 SSUTimeout; /* 0x0C */ + U8 Reserved1; /* 0x0D */ + U16 Reserved2; /* 0x0E */ U32 DeviceSettings; /* 0x10 */ U16 NumberOfDevices; /* 0x14 */ U16 UEFIVersion; /* 0x16 */ @@ -1342,18 +1427,36 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 } MPI2_CONFIG_PAGE_BIOS_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_1, Mpi2BiosPage1_t, MPI2_POINTER pMpi2BiosPage1_t; -#define MPI2_BIOSPAGE1_PAGEVERSION (0x05) +#define MPI2_BIOSPAGE1_PAGEVERSION (0x07) /* values for BIOS Page 1 BiosOptions field */ -#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0) -#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000) +#define MPI2_BIOSPAGE1_OPTIONS_BOOT_LIST_ADD_ALT_BOOT_DEVICE (0x00008000) +#define MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG (0x00004000) -#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006) -#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000) -#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002) -#define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII (0x00000004) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL (0x00000000) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE (0x00000800) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID (0x00001000) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_PSENS (0x00001800) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_ESPHY (0x00002000) + +#define MPI2_BIOSPAGE1_OPTIONS_X86_DISABLE_BIOS (0x00000400) + +#define MPI2_BIOSPAGE1_OPTIONS_MASK_REGISTRATION_UEFI_BSD (0x00000300) +#define MPI2_BIOSPAGE1_OPTIONS_USE_BIT0_REGISTRATION_UEFI_BSD (0x00000000) +#define MPI2_BIOSPAGE1_OPTIONS_FULL_REGISTRATION_UEFI_BSD (0x00000100) +#define MPI2_BIOSPAGE1_OPTIONS_ADAPTER_REGISTRATION_UEFI_BSD (0x00000200) +#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_REGISTRATION_UEFI_BSD (0x00000300) + +#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0) +#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000) + +#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006) +#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000) +#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002) +#define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII (0x00000004) -#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) +#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) /* values for BIOS Page 1 IOCSettings field */ #define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000) @@ -1477,6 +1580,8 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_2 /* BIOS Page 3 */ +#define MPI2_BIOSPAGE3_NUM_ADAPTER (4) + typedef struct _MPI2_ADAPTER_INFO { U8 PciBusNumber; /* 0x00 */ @@ -1488,17 +1593,26 @@ typedef struct _MPI2_ADAPTER_INFO #define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001) #define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002) +typedef struct _MPI2_ADAPTER_ORDER_AUX +{ + U64 WWID; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 Reserved2; /* 0x0C */ +} MPI2_ADAPTER_ORDER_AUX, MPI2_POINTER PTR_MPI2_ADAPTER_ORDER_AUX, + Mpi2AdapterOrderAux_t, MPI2_POINTER pMpi2AdapterOrderAux_t; + typedef struct _MPI2_CONFIG_PAGE_BIOS_3 { MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ U32 GlobalFlags; /* 0x04 */ U32 BiosVersion; /* 0x08 */ - MPI2_ADAPTER_INFO AdapterOrder[4]; /* 0x0C */ + MPI2_ADAPTER_INFO AdapterOrder[MPI2_BIOSPAGE3_NUM_ADAPTER]; /* 0x0C */ U32 Reserved1; /* 0x1C */ + MPI2_ADAPTER_ORDER_AUX AdapterOrderAux[MPI2_BIOSPAGE3_NUM_ADAPTER]; /* 0x20 */ /* MPI v2.5 and newer */ } MPI2_CONFIG_PAGE_BIOS_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_3, Mpi2BiosPage3_t, MPI2_POINTER pMpi2BiosPage3_t; -#define MPI2_BIOSPAGE3_PAGEVERSION (0x00) +#define MPI2_BIOSPAGE3_PAGEVERSION (0x01) /* values for BIOS Page 3 GlobalFlags */ #define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002) @@ -1990,6 +2104,8 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUN #define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01) /* values for SAS IO Unit Page 0 PhyFlags */ +#define MPI2_SASIOUNIT0_PHYFLAGS_INIT_PERSIST_CONNECT (0x40) +#define MPI2_SASIOUNIT0_PHYFLAGS_TARG_PERSIST_CONNECT (0x20) #define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10) #define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) @@ -2082,6 +2198,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUN #define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) /* MPI v2.0 only. Obsolete in MPI v2.5 and later. */ /* values for SAS IO Unit Page 1 AdditionalControlFlags */ +#define MPI2_SASIOUNIT1_ACONTROL_DA_PERSIST_CONNECT (0x0100) #define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080) #define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040) #define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020) @@ -2099,6 +2216,8 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUN #define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) /* values for SAS IO Unit Page 1 PhyFlags */ +#define MPI2_SASIOUNIT1_PHYFLAGS_INIT_PERSIST_CONNECT (0x40) +#define MPI2_SASIOUNIT1_PHYFLAGS_TARG_PERSIST_CONNECT (0x20) #define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10) #define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) @@ -2117,7 +2236,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUN /* see mpi2_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */ -/* SAS IO Unit Page 4 */ +/* SAS IO Unit Page 4 (for MPI v2.5 and earlier) */ typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP { @@ -2148,7 +2267,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUN U32 Reserved2; /* 0x1C */ U32 Reserved3; /* 0x20 */ U8 BootDeviceWaitTime; /* 0x24 */ - U8 Reserved4; /* 0x25 */ + U8 SATADeviceWaitTime; /* 0x25 */ U16 Reserved5; /* 0x26 */ U8 NumPhys; /* 0x28 */ U8 PEInitialSpinupDelay; /* 0x29 */ @@ -2595,6 +2714,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV #define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020) #define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010) #define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008) +#define MPI2_SAS_DEVICE0_FLAGS_PERSIST_CAPABLE (0x0004) #define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID (0x0002) #define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001) @@ -2766,6 +2886,19 @@ typedef struct _MPI2_SASPHY3_PHY_EVENT_C #define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1) #define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2) +/* Following codes are product specific and in MPI v2.6 and later */ +#define MPI2_SASPHY3_EVENT_CODE_LCARB_WAIT_TIME (0xD3) +#define MPI2_SASPHY3_EVENT_CODE_RCVD_CONN_RESP_WAIT_TIME (0xD4) +#define MPI2_SASPHY3_EVENT_CODE_LCCONN_TIME (0xD5) +#define MPI2_SASPHY3_EVENT_CODE_SSP_TX_START_TRANSMIT (0xD6) +#define MPI2_SASPHY3_EVENT_CODE_SATA_TX_START (0xD7) +#define MPI2_SASPHY3_EVENT_CODE_SMP_TX_START_TRANSMT (0xD8) +#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_BREAK_CONN (0xD9) +#define MPI2_SASPHY3_EVENT_CODE_SSP_RX_START_RECEIVE (0xDA) +#define MPI2_SASPHY3_EVENT_CODE_SATA_RX_START_RECEIVE (0xDB) +#define MPI2_SASPHY3_EVENT_CODE_SMP_RX_START_RECEIVE (0xDC) + + /* values for the CounterType field */ #define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00) #define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01) Modified: stable/10/sys/dev/mpr/mpi/mpi2_hbd.h ============================================================================== --- stable/10/sys/dev/mpr/mpi/mpi2_hbd.h Mon May 16 18:11:53 2016 (r299961) +++ stable/10/sys/dev/mpr/mpi/mpi2_hbd.h Mon May 16 18:47:53 2016 (r299962) @@ -1,6 +1,6 @@ /*- * Copyright (c) 2012-2015 LSI Corp. - * Copyright (c) 2013-2015 Avago Technologies + * Copyright (c) 2013-2016 Avago Technologies * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -34,14 +34,15 @@ /* * Copyright (c) 2009-2015 LSI Corporation. - * Copyright (c) 2013-2015 Avago Technologies + * Copyright (c) 2013-2016 Avago Technologies + * All rights reserved. * * * Name: mpi2_hbd.h * Title: MPI Host Based Discovery messages and structures * Creation Date: October 21, 2009 * - * mpi2_hbd.h Version: 02.00.02 + * mpi2_hbd.h Version: 02.00.03 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -57,6 +58,7 @@ * 08-11-10 02.00.01 Removed PortGroups, DmaGroup, and ControlGroup from * HBD Action request, replaced by AdditionalInfo field. * 11-18-11 02.00.02 Incorporating additions for MPI v2.5. + * 11-18-14 02.00.03 Updated copyright information. * -------------------------------------------------------------------------- */ Modified: stable/10/sys/dev/mpr/mpi/mpi2_history.txt ============================================================================== --- stable/10/sys/dev/mpr/mpi/mpi2_history.txt Mon May 16 18:11:53 2016 (r299961) +++ stable/10/sys/dev/mpr/mpi/mpi2_history.txt Mon May 16 18:47:53 2016 (r299962) @@ -1,6 +1,6 @@ /*- * Copyright (c) 2012-2015 LSI Corp. - * Copyright (c) 2013-2015 Avago Technologies + * Copyright (c) 2013-2016 Avago Technologies * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -37,27 +37,28 @@ ============================== Copyright (c) 2000-2015 LSI Corporation. - Copyright (c) 2013-2015 Avago Technologies + Copyright (c) 2013-2016 Avago Technologies + All rights reserved. --------------------------------------- - Header Set Release Version: 02.00.33 - Header Set Release Date: 12-05-13 + Header Set Release Version: 02.00.42 + Header Set Release Date: 01-04-16 --------------------------------------- Filename Current version Prior version ---------- --------------- ------------- - mpi2.h 02.00.33 02.00.32 - mpi2_cnfg.h 02.00.27 02.00.26 - mpi2_init.h 02.00.15 02.00.15 - mpi2_ioc.h 02.00.24 02.00.23 - mpi2_raid.h 02.00.10 02.00.10 - mpi2_sas.h 02.00.08 02.00.08 - mpi2_targ.h 02.00.06 02.00.06 - mpi2_tool.h 02.00.11 02.00.11 - mpi2_type.h 02.00.00 02.00.00 - mpi2_ra.h 02.00.00 02.00.00 - mpi2_hbd.h 02.00.02 02.00.02 - mpi2_history.txt 02.00.33 02.00.32 + mpi2.h 02.00.42 02.00.41 + mpi2_cnfg.h 02.00.35 02.00.34 + mpi2_init.h 02.00.20 02.00.19 + mpi2_ioc.h 02.00.27 02.00.27 + mpi2_raid.h 02.00.11 02.00.11 + mpi2_sas.h 02.00.10 02.00.10 + mpi2_targ.h 02.00.09 02.00.09 + mpi2_tool.h 02.00.13 02.00.13 + mpi2_type.h 02.00.01 02.00.01 + mpi2_ra.h 02.00.01 02.00.01 + mpi2_hbd.h 02.00.03 02.00.03 + mpi2_history.txt 02.00.41 02.00.40 * Date Version Description @@ -134,6 +135,22 @@ mpi2.h * 04-17-13 02.00.31 Bumped MPI2_HEADER_VERSION_UNIT. * 08-19-13 02.00.32 Bumped MPI2_HEADER_VERSION_UNIT. * 12-05-13 02.00.33 Bumped MPI2_HEADER_VERSION_UNIT. + * 01-08-14 02.00.34 Bumped MPI2_HEADER_VERSION_UNIT. + * 06-13-14 02.00.35 Bumped MPI2_HEADER_VERSION_UNIT. + * 11-18-14 02.00.36 Updated copyright information. + * Bumped MPI2_HEADER_VERSION_UNIT. + * 03-16-15 02.00.37 Updated for MPI v2.6. + * Bumped MPI2_HEADER_VERSION_UNIT. + * Added Scratchpad registers to + * MPI2_SYSTEM_INTERFACE_REGS. + * Added MPI2_DIAG_SBR_RELOAD. + * Added MPI2_IOCSTATUS_INSUFFICIENT_POWER. + * 03-19-15 02.00.38 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-25-15 02.00.39 Bumped MPI2_HEADER_VERSION_UNIT. + * 08-25-15 02.00.40 Bumped MPI2_HEADER_VERSION_UNIT. + * Added V7 HostDiagnostic register defines + * 12-15-15 02.00.41 Bumped MPI_HEADER_VERSION_UNIT + * 01-04-16 02.00.42 Bumped MPI_HEADER_VERSION_UNIT * -------------------------------------------------------------------------- mpi2_cnfg.h @@ -294,6 +311,21 @@ mpi2_cnfg.h * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. * Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. + * 01-08-14 02.00.28 Added more defines for the BiosOptions field of + * MPI2_CONFIG_PAGE_BIOS_1. + * 06-13-14 02.00.29 Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and + * more defines for the BiosOptions field.. + * 11-18-14 02.00.30 Updated copyright information. + * Added MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG. + * Added AdapterOrderAux fields to BIOS Page 3. + * 03-16-15 02.00.31 Updated for MPI v2.6. + * Added BoardPowerRequirement, PCISlotPowerAllocation, and + * Flags field to IO Unit Page 7. + * Added IO Unit Page 11. + * Added new SAS Phy Event codes + * 05-25-15 02.00.33 Added more defines for the BiosOptions field of + * MPI2_CONFIG_PAGE_BIOS_1. + * 12-18-15 02.00.35 Added SATADeviceWaitTime to SAS IO Unit Page 4. * -------------------------------------------------------------------------- mpi2_init.h @@ -323,6 +355,16 @@ mpi2_init.h * Priority to match SAM-4. * Added EEDPErrorOffset to MPI2_SCSI_IO_REPLY. * 07-10-12 02.00.14 Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION. + * 04-09-13 02.00.15 Added SCSIStatusQualifier field to MPI2_SCSI_IO_REPLY, + * replacing the Reserved4 field. + * 11-18-14 02.00.16 Updated copyright information. + * 03-16-15 02.00.17 Updated for MPI v2.6. + * Added MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH. + * Added MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF and + * MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF. + * 08-26-15 02.00.18 Added SCSITASKMGMT_MSGFLAGS for Target Reset. + * 12-18-15 02.00.19 Added EEDPObservedValue added to SCSI IO Reply message. + * 01-04-16 02.00.20 Modified EEDP reported values in SCSI IO Reply message. * -------------------------------------------------------------------------- mpi2_ioc.h @@ -441,6 +483,16 @@ mpi2_ioc.h * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY. * Added Encrypted Hash Extended Image. * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS. + * 11-18-14 02.00.25 Updated copyright information. + * 03-16-15 02.00.26 Updated for MPI v2.6. + * Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and + * MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT. + * Added MPI2_EVENT_PCIE_LINK_COUNTER and + * MPI26_EVENT_DATA_PCIE_LINK_COUNTER. + * Added MPI26_CTRL_OP_SHUTDOWN. + * Added MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG + * Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS + * 08-25-15 02.00.27 Added IC ARCH Class based signature defines. * -------------------------------------------------------------------------- mpi2_raid.h @@ -479,6 +531,9 @@ mpi2_sas.h * Passthrough Request message. * 08-19-13 02.00.08 Made MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL obsolete * for anything newer than MPI v2.0. + * 11-18-14 02.00.09 Updated copyright information. + * 03-16-15 02.00.10 Updated for MPI v2.6. + * Added MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA. * -------------------------------------------------------------------------- mpi2_targ.h @@ -496,6 +551,11 @@ mpi2_targ.h * request message structure. * Added AbortType MPI2_TARGET_MODE_ABORT_DEVHANDLE and * MPI2_TARGET_MODE_ABORT_ALL_COMMANDS. + * 06-13-14 02.00.07 Added MinMSIxIndex and MaxMSIxIndex fields to + * MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST. + * 11-18-14 02.00.08 Updated copyright information. + * 03-16-15 02.00.09 Updated for MPI v2.6. + * Added MPI26_TARGET_ASSIST_IOFLAGS_ESCAPE_PASSTHROUGH. * -------------------------------------------------------------------------- mpi2_tool.h @@ -519,14 +579,18 @@ mpi2_tool.h * 07-26-12 02.00.10 Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that * it uses MPI Chain SGE as well as MPI Simple SGE. * 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info. + * 01-08-14 02.00.12 Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC. + * 11-18-14 02.00.13 Updated copyright information. * -------------------------------------------------------------------------- mpi2_type.h * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 11-18-14 02.00.01 Updated copyright information. * -------------------------------------------------------------------------- mpi2_ra.h * 05-06-09 02.00.00 Initial version. + * 11-18-14 02.00.01 Updated copyright information. * -------------------------------------------------------------------------- mpi2_hbd.h @@ -534,24 +598,53 @@ mpi2_hbd.h * 08-11-10 02.00.01 Removed PortGroups, DmaGroup, and ControlGroup from * HBD Action request, replaced by AdditionalInfo field. * 11-18-11 02.00.02 Incorporating additions for MPI v2.5. + * 11-18-14 02.00.03 Updated copyright information. * -------------------------------------------------------------------------- mpi2_history.txt Parts list history -Filename 02.00.33 02.00.32 02.00.31 02.00.30 ----------- -------- -------- -------- -------- -mpi2.h 02.00.33 02.00.32 02.00.31 02.00.30 -mpi2_cnfg.h 02.00.27 02.00.26 02.00.25 02.00.25 -mpi2_init.h 02.00.15 02.00.15 02.00.15 02.00.15 -mpi2_ioc.h 02.00.24 02.00.23 02.00.22 02.00.22 -mpi2_raid.h 02.00.10 02.00.10 02.00.10 02.00.09 -mpi2_sas.h 02.00.08 02.00.08 02.00.07 02.00.07 -mpi2_targ.h 02.00.06 02.00.06 02.00.06 02.00.06 -mpi2_tool.h 02.00.11 02.00.11 02.00.10 02.00.10 -mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 -mpi2_ra.h 02.00.00 02.00.00 02.00.00 02.00.00 -mpi2_hbd.h 02.00.02 02.00.02 02.00.02 02.00.02 +Filename 02.00.42 +---------- -------- +mpi2.h 02.00.42 +mpi2_cnfg.h 02.00.35 +mpi2_init.h 02.00.20 +mpi2_ioc.h 02.00.27 +mpi2_raid.h 02.00.11 +mpi2_sas.h 02.00.10 +mpi2_targ.h 02.00.09 +mpi2_tool.h 02.00.13 +mpi2_type.h 02.00.01 +mpi2_ra.h 02.00.01 +mpi2_hbd.h 02.00.03 + +Filename 02.00.41 02.00.40 02.00.39 02.00.38 02.00.37 02.00.36 +---------- -------- -------- -------- -------- -------- -------- +mpi2.h 02.00.41 02.00.40 02.00.39 02.00.38 02.00.37 02.00.36 +mpi2_cnfg.h 02.00.35 02.00.34 02.00.33 02.00.32 02.00.31 02.00.30 +mpi2_init.h 02.00.19 02.00.18 02.00.17 02.00.17 02.00.17 02.00.16 +mpi2_ioc.h 02.00.27 02.00.27 02.00.26 02.00.26 02.00.26 02.00.25 +mpi2_raid.h 02.00.11 02.00.11 02.00.11 02.00.11 02.00.11 02.00.11 +mpi2_sas.h 02.00.10 02.00.10 02.00.10 02.00.10 02.00.10 02.00.09 +mpi2_targ.h 02.00.09 02.00.09 02.00.09 02.00.09 02.00.09 02.00.08 +mpi2_tool.h 02.00.13 02.00.13 02.00.13 02.00.13 02.00.13 02.00.13 +mpi2_type.h 02.00.01 02.00.01 02.00.01 02.00.01 02.00.01 02.00.01 +mpi2_ra.h 02.00.01 02.00.01 02.00.01 02.00.01 02.00.01 02.00.01 +mpi2_hbd.h 02.00.03 02.00.03 02.00.03 02.00.03 02.00.03 02.00.03 + +Filename 02.00.35 02.00.34 02.00.33 02.00.32 02.00.31 02.00.30 +---------- -------- -------- -------- -------- -------- -------- +mpi2.h 02.00.35 02.00.34 02.00.33 02.00.32 02.00.31 02.00.30 +mpi2_cnfg.h 02.00.29 02.00.28 02.00.27 02.00.26 02.00.25 02.00.25 +mpi2_init.h 02.00.15 02.00.15 02.00.15 02.00.15 02.00.15 02.00.15 +mpi2_ioc.h 02.00.24 02.00.24 02.00.24 02.00.23 02.00.22 02.00.22 +mpi2_raid.h 02.00.10 02.00.10 02.00.10 02.00.10 02.00.10 02.00.09 +mpi2_sas.h 02.00.08 02.00.08 02.00.08 02.00.08 02.00.07 02.00.07 +mpi2_targ.h 02.00.07 02.00.06 02.00.06 02.00.06 02.00.06 02.00.06 +mpi2_tool.h 02.00.12 02.00.12 02.00.11 02.00.11 02.00.10 02.00.10 +mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 +mpi2_ra.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 +mpi2_hbd.h 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 Filename 02.00.29 02.00.28 02.00.27 02.00.26 02.00.25 02.00.24 ---------- -------- -------- -------- -------- -------- -------- Modified: stable/10/sys/dev/mpr/mpi/mpi2_init.h ============================================================================== --- stable/10/sys/dev/mpr/mpi/mpi2_init.h Mon May 16 18:11:53 2016 (r299961) +++ stable/10/sys/dev/mpr/mpi/mpi2_init.h Mon May 16 18:47:53 2016 (r299962) @@ -1,6 +1,6 @@ /*- * Copyright (c) 2012-2015 LSI Corp. - * Copyright (c) 2013-2015 Avago Technologies + * Copyright (c) 2013-2016 Avago Technologies * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -34,14 +34,15 @@ /* * Copyright (c) 2000-2015 LSI Corporation. - * Copyright (c) 2013-2015 Avago Technologies + * Copyright (c) 2013-2016 Avago Technologies + * All rights reserved. * * * Name: mpi2_init.h * Title: MPI SCSI initiator mode messages and structures * Creation Date: June 23, 2006 * - * mpi2_init.h Version: 02.00.15 + * mpi2_init.h Version: 02.00.20 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -81,6 +82,14 @@ * 07-10-12 02.00.14 Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION. * 04-09-13 02.00.15 Added SCSIStatusQualifier field to MPI2_SCSI_IO_REPLY, * replacing the Reserved4 field. + * 11-18-14 02.00.16 Updated copyright information. + * 03-16-15 02.00.17 Updated for MPI v2.6. + * Added MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH. + * Added MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF and + * MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF. + * 08-26-15 02.00.18 Added SCSITASKMGMT_MSGFLAGS for Target Reset. + * 12-18-15 02.00.19 Added EEDPObservedValue added to SCSI IO Reply message. + * 01-04-16 02.00.20 Modified EEDP reported values in SCSI IO Reply message. * -------------------------------------------------------------------------- */ @@ -164,8 +173,9 @@ typedef struct _MPI2_SCSI_IO_REQUEST #define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR (0x0C) #define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR (0x00) #define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04) -#define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08) -#define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C) +#define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08) /* for MPI v2.5 and earlier only */ +#define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C) /* for MPI v2.5 and earlier only */ +#define MPI26_SCSIIO_MSGFLAGS_IOCCTL_SENSE_ADDR (0x08) /* for MPI v2.6 only */ /* SCSI IO SGLFlags bits */ @@ -268,7 +278,7 @@ typedef union _MPI25_SCSI_IO_CDB_UNION } MPI25_SCSI_IO_CDB_UNION, MPI2_POINTER PTR_MPI25_SCSI_IO_CDB_UNION, Mpi25ScsiIoCdb_t, MPI2_POINTER pMpi25ScsiIoCdb_t; -/* MPI v2.5 SCSI IO Request Message */ +/* MPI v2.5/2.6 SCSI IO Request Message */ typedef struct _MPI25_SCSI_IO_REQUEST { U16 DevHandle; /* 0x00 */ @@ -347,8 +357,10 @@ typedef struct _MPI25_SCSI_IO_REQUEST #define MPI25_SCSIIO_IOFLAGS_NORMAL_PATH (0x0000) #define MPI25_SCSIIO_IOFLAGS_FAST_PATH (0x4000) +#define MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH (0x2000) /* MPI v2.6 and later */ #define MPI25_SCSIIO_IOFLAGS_LARGE_CDB (0x1000) #define MPI25_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800) +#define MPI26_SCSIIO_IOFLAGS_PORT_REQUEST (0x0400) /* MPI v2.6 and later; IOC use only */ #define MPI25_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF) /* MPI v2.5 defines for the EEDPFlags bits */ @@ -394,11 +406,19 @@ typedef struct _MPI2_SCSI_IO_REPLY U16 TaskTag; /* 0x20 */ U16 SCSIStatusQualifier; /* 0x22 */ U32 BidirectionalTransferCount; /* 0x24 */ - U32 EEDPErrorOffset; /* 0x28 */ /* MPI 2.5 only; Reserved in MPI 2.0 */ - U32 Reserved6; /* 0x2C */ + U32 EEDPErrorOffset; /* 0x28 */ /* MPI 2.5+ only; Reserved in MPI 2.0 */ + U16 EEDPObservedAppTag; /* 0x2C */ /* MPI 2.5+ only; Reserved in MPI 2.0 */ + U16 EEDPObservedGuard; /* 0x2E */ /* MPI 2.5+ only; Reserved in MPI 2.0 */ + U32 EEDPObservedRefTag; /* 0x30 */ /* MPI 2.5+ only; Reserved in MPI 2.0 */ } MPI2_SCSI_IO_REPLY, MPI2_POINTER PTR_MPI2_SCSI_IO_REPLY, Mpi2SCSIIOReply_t, MPI2_POINTER pMpi2SCSIIOReply_t; +/* SCSI IO Reply MsgFlags bits */ +#define MPI26_SCSIIO_REPLY_MSGFLAGS_REFTAG_OBSERVED_VALID (0x01) +#define MPI26_SCSIIO_REPLY_MSGFLAGS_GUARD_OBSERVED_VALID (0x02) +#define MPI26_SCSIIO_REPLY_MSGFLAGS_APPTAG_OBSERVED_VALID (0x04) + + /* SCSI IO Reply SCSIStatus values (SAM-4 status codes) */ #define MPI2_SCSI_STATUS_GOOD (0x00) @@ -474,12 +494,10 @@ typedef struct _MPI2_SCSI_TASK_MANAGE_RE #define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18) #define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00) +#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01) #define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08) #define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10) -#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01) - - /* SCSI Task Management Reply Message */ typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY @@ -561,6 +579,7 @@ typedef struct _MPI2_SEP_REQUEST #define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01) /* SlotStatus defines */ +#define MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF (0x00080000) /* MPI v2.6 and newer */ #define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000) #define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) #define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200) @@ -598,6 +617,7 @@ typedef struct _MPI2_SEP_REPLY Mpi2SepReply_t, MPI2_POINTER pMpi2SepReply_t; /* SlotStatus defines */ +#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF (0x00080000) /* MPI v2.6 and newer */ #define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000) #define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) #define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200) Modified: stable/10/sys/dev/mpr/mpi/mpi2_ioc.h ============================================================================== --- stable/10/sys/dev/mpr/mpi/mpi2_ioc.h Mon May 16 18:11:53 2016 (r299961) +++ stable/10/sys/dev/mpr/mpi/mpi2_ioc.h Mon May 16 18:47:53 2016 (r299962) @@ -1,6 +1,6 @@ /*- * Copyright (c) 2012-2015 LSI Corp. - * Copyright (c) 2013-2015 Avago Technologies + * Copyright (c) 2013-2016 Avago Technologies * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -34,14 +34,15 @@ /* * Copyright (c) 2000-2015 LSI Corporation. - * Copyright (c) 2013-2015 Avago Technologies + * Copyright (c) 2013-2016 Avago Technologies + * All rights reserved. * * * Name: mpi2_ioc.h * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: October 11, 2006 * - * mpi2_ioc.h Version: 02.00.24 + * mpi2_ioc.h Version: 02.00.27 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -168,6 +169,17 @@ * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY. * Added Encrypted Hash Extended Image. * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS. + * 11-18-14 02.00.25 Updated copyright information. + * 03-16-15 02.00.26 Updated for MPI v2.6. + * Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and + * MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT. + * Added MPI2_EVENT_PCIE_LINK_COUNTER and + * MPI26_EVENT_DATA_PCIE_LINK_COUNTER. + * Added MPI26_CTRL_OP_SHUTDOWN. + * Added MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG + * Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS + * 08-25-15 02.00.27 Added IC ARCH Class based signature defines + * * -------------------------------------------------------------------------- */ @@ -200,8 +212,8 @@ typedef struct _MPI2_IOC_INIT_REQUEST U16 MsgVersion; /* 0x0C */ U16 HeaderVersion; /* 0x0E */ U32 Reserved5; /* 0x10 */ - U16 Reserved6; /* 0x14 */ - U8 Reserved7; /* 0x16 */ + U16 ConfigurationFlags; /* 0x14 */ + U8 HostPageSize; /* 0x16 */ U8 HostMSIxVectors; /* 0x17 */ U16 Reserved8; /* 0x18 */ U16 SystemRequestFrameSize; /* 0x1A */ @@ -329,7 +341,12 @@ typedef struct _MPI2_IOC_FACTS_REPLY U16 MaxDevHandle; /* 0x38 */ U16 MaxPersistentEntries; /* 0x3A */ *** DIFF OUTPUT TRUNCATED AT 1000 LINES ***
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201605161847.u4GIlrZ9093625>